Publications associées à A performance-driven simulation workflow for PV integration into the design process: application on an innovative building project in Switzerland

Publications associées (37)

Photovoltaic panels diffusion in Switzerland: understanding adopters profiles using clustering methods

Pablo Francisco Martinez Alcaraz, Claudia Rebeca Binder Signer, Gloria Serra Coch, Maria Anna Hecher

The adoption of photovoltaic panels (PV) by households is essential to meet residential Swiss energy transition targets. While previous studies have mostly focused on the factors influencing PV adoption by comparing adopters with non-adopters, few have ack ...

2025

Re-defining Non-tracking Solar Cell Efficiency Limits with Directional Spectral Filters

Giulia Tagliabue, Alan Richard Bowman

Optical filters that respond to the wavelength and direction of incident light can be used to increase the efficiency of tracking solar cells. However, as tracking solar cells are more expensive to install and maintain, it is likely that nontracking solar ...

American Chemical Society (ACS)2025

Correlating long-term performance and aging behaviour of building integrated PV modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Ebrar Özkalay

Because building-integrated photovoltaic (BIPV) modules are fully integrated into a building envelope, the back of the module can be exposed to little or no ventilation, resulting in increased operating temperatures. As the temperature increases, the perfo ...

Elsevier Science Sa2024

Network time series forecasting in photovoltaics power production

Jelena Simeunovic

Accurate forecasting of photovoltaic (PV) power production is crucial for the integration of more renewable energy sources into the power grid. PV power production is highly intermittent, due to the stochastic cloud behaviour and cloud dynamics. Previous w ...

EPFL2024

Evaluating the role of inkjet printing in perovskite solar modules manufacturing using mathematical modeling

Mohammad Khaja Nazeeruddin, François Maréchal, Naveen Bhati

Given the solution-phase processability and low energy intensity of several techniques, many techniques have been explored to manufacture these cells and modules. Among them, inkjet printing has shown potential for fabricating all the active layers while a ...

2024

Advanced Manufacturing and Characterization of Building-Integrated Photovoltaic Modules

Alejandro Borja Block

Photovoltaic (PV) technology is necessary for global decarbonization. However, one of the challenges of the technology is that its land use may conflict with other space demands. Building-integrated photovoltaic (BIPV) is a solution to efficiently use the ...

EPFL2024

Identification of typical district configurations: A two-step global sensitivity analysis framework

François Maréchal, Jonas Schnidrig, Cédric Terrier, Arthur Antoine Chuat

The recent geopolitical conflicts in Europe have underscored the vulnerability of the current energy system to the volatility of energy carrier prices. In the prospect of defining robust energy systems ensuring sustainable energy supply in the future, the ...

Pergamon-Elsevier Science Ltd2024

Colouring solutions for building integrated photovoltaic modules: A review

Christophe Ballif, Aïcha Hessler-Wyser, Antonin Faes, Alejandro Borja Block, Umang Bhupatrai Desai, Marie Amélie Camille Courtant

The conflict between PV installations and other land uses, such as forestry or agriculture, highlights the urgency for alternative solutions. Integrating PV technology into the built environment is a compelling strategy to mitigate these challenges, enabli ...

2024

Reliability and Long-term Performance of Building Integrated Photovoltaic (BIPV) Modules

Ebrar Özkalay

Solar photovoltaics (PV) is one of the most competitive renewable energy technologies in order to meet the increasing global energy demand and decrease CO2 emissions by competing effectively with fossil fuels. One of the important applications of PV energy ...

EPFL2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024

Distributional justice, effectiveness, and costs of current and alternative solar PV incentive schemes in Switzerland

Philippe Thalmann

Like many other countries, Switzerland offers various incentives to promote residential solar PV, but not all households have equal access to them. Using a microsimulation approach based on merged data from the Swiss Household Budget Survey and Household E ...

IOP Publishing2024

Teaching Not To

Charlotte Malterre-Barthes

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

Probabilistic Techno-Economic Assessment of Medium-Scale Photoelectrochemical Fuel Generation Plants

Sophia Haussener, Alexandre Dominique M. Cattry

Photoelectrochemical (PEC) systems are promising approaches for sustainable fuel processing. PEC devices, like conventional photovoltaic-electrolyzer (PV-EC) systems, utilize solar energy for splitting water into hydrogen and oxygen. Contrary to PV-EC syst ...

2024

From PV to EV: Mapping the Potential for Electric Vehicle Charging with Solar Energy in Europe

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

The electrification of the transport sector is a key element in decarbonizing our societies. However, energy systems will have to cope with additional electricity demand due to the charging needs of electric vehicles (EVs) together with the integration of ...

2024

Spatial Modeling for Building Design Evaluation: from Visual Landscape Quality Assessment to Devaluation Risk Estimation

Adam Robert Swietek

Zoning reform is a crucial tool for cities to adapt to contemporary challenges. However, its implementation remains challenging. Property owners, with a vested interest in the value of their neighborhoods, are sensitive to local developments and the potent ...

EPFL2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Kléber Nicolet-dit-Félix, Christophe Ballif, Matthieu Despeisse, Aïcha Hessler-Wyser, Jacques Levrat, Antonin Faes, Gianluca Cattaneo, Umang Bhupatrai Desai, Fahradin Mujovi

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Interfacial engineering through lead binding using crown ethers in perovskite solar cells

Kevin Sivula, Jun Ho Yum, Jovana Milic, Jiyoun Seo, Yeonju Kim

In the domain of perovskite solar cells (PSCs), the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions. This study pioneers an approach that not only rectifies lea ...

Elsevier2024

An Asymmetric Perturbation Signal for Enhanced Perturbation Injection Capabilities of a Grid-Connected Converter

Drazen Dujic, Andrea Cervone, Jules Christian Georges Macé

Impedance estimation is an important tool for grid- converter interaction evaluation. Using existing grid-connected converters for perturbation injection enables grid impedance estimation during operation without additional hardware (namely dedicated pertu ...

2024

Blade-Coating of High Crystallinity Cesium-Formamidinium Perovskite Formulations

Anaël Morgane Jaffrès, Christophe Ballif, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman

Up-scalable coating processes need to be developed to manufacture efficient and stable perovskite-based solar modules. In this work, we combine two Lewis base additives (N,N′-dimethylpropyleneurea and thiourea) to fabricate high-quality Cs0.15FA0.85PbI3 pe ...

2024

Investigating Non-equilibrium Physics in Wide Bandgap Semiconductors and Quantum Materials via Ultrafast Spectroscopy

Hui-Yuan Chen

This thesis uses femtosecond laser spectroscopy in studying strong correlation in condensed matters that are pertinent to future technology: a wide bandgap perovskite and a quantum material, with the employment of ultrafast time-resolved spectroscopy in th ...

EPFL2024