Publications associées à Electro-switchable polydimethylsiloxane-based optofluidics

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Giovanni De Cesare, Mikaël Martino, Sylvain Dunand, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Matthew James Large

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Iop Publishing Ltd2024

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control

Aïcha Hessler-Wyser, Johann Michler, Amit Sharma, Daniele Casari, Caroline Hain, Thomas Nelis

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited via microwave plasma-assisted high power reactive magnetron sputtering ( ...

Amer Chemical Soc2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Petru Pasquale Albertini, Ona Segura Lecina, Coline Marie Agathe Boulanger, Philippe Benjamin Green, Mark Adrian Newton, Krishna Kumar, Jari Leemans

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Ruben Ricca, Victor Carle Adrien Boureau

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Competition between Carrier Injection and Structural Distortions in Electron-Doped Perovskite Nickelate Thin Films

Jean-Marc Triscone, Duncan Thomas Lindsay Alexander, Jonathan Spring, Bernat Mundet

The discovery of superconductivity in doped infinite-layer nickelate thin films has brought increased attention to the behavior of the doped perovskite phase. Despite this interest, the majority of existing studies pertain to hole-doped perovskite rare-ear ...

WILEY2023

Quantitative study of the thickness-dependent stress in indium tin oxide thin films

Varun Gupta

A quantitative analysis of stress in indium tin oxide (ITO) films with varying thicknesses was conducted using high-precision stylus profilometry. The experimental results revealed a transition of the stress type from tensile to compressive as the ITO film ...

Elsevier Science Sa2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo, Maja Deborah Bachmann

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Atomic-level structure determination of amorphous molecular solids by NMR

Manuel Cordova, Arthur César Pinon, David Lyndon Emsley, Pinelopi Moutzouri

Structure determination of amorphous materials remains challenging, owing to the disorder inherent to these materials. Nuclear magnetic resonance (NMR) powder crystallography is a powerful method to determine the structure of molecular solids, but disorder ...

Nature Portfolio2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Anomalous Hall effect and magnetic structure of the topological semimetal (Mn0.78Fe0.22)3Ge

Jan Persson, Jian Rui Soh

Me3+8Ge, being a Weyl semimetal, shows a large anomalous Hall effect (AHE), which decreases slowly with an increase in 8 from 0.1 to 0.4. However, AHE in this compound remains significantly large in the whole range of 8 because of the robust nature of the ...

AMER PHYSICAL SOC2023

Investigating the Effect of Crystal Morphology on Optoelectronic Properties of Zinc Phosphide Thin Films via Optical-pump Terahertz Probe Spectroscopy

Elias Zsolt Stutz, Jean-Baptiste Leran, Léa Buswell, Mahdi Zamani, Simon Robert Escobar Steinvall, Rajrupa Paul, Mirjana Dimitrievska

Zinc phosphide ( Zn3P2) is a promising earth-abundant material for solar cell applications but calls for the further understanding of its optoelectronic properties. In this work, we perform contact-free and noninvasive optical-pump terahertz probe (OPTP) s ...

IEEE2023

NMR Crystallography in the Big Data Era: New Methods and Applications Powered by Machine Learning

Manuel Cordova

Structure determination of materials is key to understanding their physical properties. While single-crystal X-ray diffraction is the gold standard for structures displaying long-range order, many materials of interest are polycrystalline and/or disordered ...

EPFL2023

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Mikaël Martino, Sylvain Dunand, Nicolas Würsch, Luca Massimiliano Antognini, Matthew James Large

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability

Esther Amstad

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Phot ...

Amer Chemical Soc2023

Transparent Liquid Crystal Hole-Transporting Material for Stable Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Kasparas Rakstys, Hiroyuki Kanda, Jianxing Xia

Hexakis(hexyloxy)triphenylene (HAT6) discotic liquid crystal is employed as a transparent hole-transporting material (HTM) for perovskite solar cells (PSCs) and a power conversion efficiency (PCE) of 15.7% is obtained, which is the highest using HAT6 type ...

WILEY-V C H VERLAG GMBH2023