Publications associées à Fabrication of polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics: The influence of initial pressure and sintering temperature on its morphology and photoluminescence activity

Publications associées (38)

Tuning Molecular Emission: Exploring Plasmonic Coupling Effects across High and Low Quantum Yields

The interaction between molecules and plasmonic nanoparticles significantly influences molecular emission properties, offering opportunities to enhance fluorescence through the Purcell effect and strong coupling phenomena. While previous studies have focus ...

2025

Effects of Rate-dependent Plasticity on Residual Stresses in Additive Manufacturing of Complex Alloys

Recep Ekin Kubilay

The recent introduction of high entropy alloys presents an exciting opportunity for novel material performance, offering extensive possibilities for tailoring material properties. Dislocation mechanisms in these alloys must be fully understood since they p ...

EPFL2025

Measuring electrical properties in semiconductor devices by pixelated STEM and off-axis electron holography (or convergent beams vs. plane waves)

Victor Carle Adrien Boureau

We demonstrate the use of both pixelated differential phase contrast (DPC) scanning transmission electron microscopy (STEM) and off-axis electron holography (EH) for the measurement of electric fields and assess the advantages and limitations of each techn ...

Pergamon-Elsevier Science Ltd2024

Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms

Wenjing Sun

The emergence of mycelium-bonded biocomposites has been stimulated in the quest for sustainable development. These biocomposites exhibit enhanced mechanical properties through hot pressing, with mycelium playing a crucial role as both the adhesive and rein ...

Taylor & Francis Ltd2024

Atomistic simulation and electron microscopy to characterize grain boundaries in doped beta-tricalcium phosphate ceramics

Gabrielle Anne Laguisma Sblendorio

The limitations and potential complications correlated with autogenous bone grafts have raised interest in the development of synthetic bone graft substitutes. ß-tricalcium phosphate (ß-TCP) is one of the most promising materials for synthetic bone graft s ...

EPFL2021

On the structure of (111) twist grain boundaries in diamond: atomistic simulations with Tersoff-type interatomic potentials

Carolina Baruffi

In nanocrystalline diamond thin films, the high grain boundary density and the associated grain boundary properties may dominate the overall material behavior. In the present work, we systematically investigate (111) twist grain boundaries in diamond carbo ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Carolina Baruffi

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Hossein Ghasemi Tabasi, Shreyas Sanjay Joglekar

The influence of Hf on the heat treatment response of a Laser Powder Bed Fusion (L-PBF) fabricated Ni-base superalloy was investigated. A Hf-free version of CM247LC, CM247LC NHf, and CM247LC (similar to 1.4 wt% Hf) were subjected to identical thermal treat ...

ELSEVIER SCIENCE INC2021

Particle-size segregation and rheology coupling in dense granular flows

Tomás Alfredo Trewhela Palacios

Dense granular flows -debris or pyroclastic flows, avalanches, granular flows in heaps, silos or rotating drums-are ubiquitous to many natural and industrial processes. Their grain composition is often polydisperse, with particles differing in shape, size ...

EPFL2021

Tensile and creep-rupture response of additively manufactured nickel-based superalloy CM247LC

Christian Leinenbach

Tensile and creep rupture properties of crack-free CM247LC alloy, processed via laser powder bed fusion, have been characterised in this work at temperatures up to 1000 & DEG;C. The subject alloy matches or even exceeds the tensile performance of its direc ...

ELSEVIER2023

Superconducting 2D NbS2 Grown Epitaxially by Chemical Vapor Deposition

Aleksandra Radenovic, Andras Kis, Michal Daniel Macha, Mukesh Kumar Tripathi, Yanfei Zhao, Guilherme Migliato Marega, Zhenyu Wang, Cheol Yeon Cheon, Hyungoo Ji

Metallic two-dimensional (2D) transition metal dichalcogenides (TMDCs) are attracting great attention because of their interesting low-temperature properties such as superconductivity, magnetism, and charge density waves (CDW). However, further studies and ...

2021

Implementing Multi-Electron Transfer Strategies in Uranium Chemistry

Dieuwertje Katelijn Modder

In the last decades, the activation of small molecules has attracted increasing attention for their use as cheap and abundant feedstock. Low-oxidation state uranium complexes have displayed high reactivity towards small molecules thanks to their unique pro ...

EPFL2023

Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...

Elsevier Science Sa2023

Design using randomness: a new dimension for metallurgy

William Curtin

High entropy alloys add a new dimension, atomic-scale randomness and the associated scale-dependent composition fluctuations, to the traditional metallurgical axes of time-temperature-composition-microstructure. Alloy performance is controlled by the energ ...

2020

Template-assisted electrodeposition of nickel and nickel copper 3D microcomponents

Patrik Schürch

New types of metamaterials and architectured material require metallic materials with precise structural design in the microscale. However, additivemanufacturing of metallic structures in themicroscale has proven difficult, as the demand for the material q ...

EPFL2020

Spark Plasma Sintering of Ceramics: From Modeling to Practice

Paul Bowen, Michael Stuer, Zhe Zhao

Summarizing the work of nearly a decade of research on spark plasma sintering (SPS), a review is given on the specificities and key factors to be considered in SPS of ceramic materials, based on the authors’ own research. Alumina is used primarily as a mod ...

2020

Thermal coarsening of individual titanate nanowires and their assemblies: Surface vs. bulk diffusion

László Forró, Luca Rossi, Endre Horvath, Massimo Spina, Sergiy Katrych, Laurent Syavoch Bernard, Lidia Rocoffort de Vinnière

The thermal coarsening of titanate nanowires was investigated from room temperature to 1000 degrees C by AFM, SEM, XRD and Raman spectroscopy. Phase transformation kinetics and the external morphology were studied in two configurations: i) as individual an ...

2020

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Decoding the Mechanisms of Phase Transitions from In Situ Microscopy Observations

Vasiliki Tileli, Reinis Ignatans

Analysis of the temperature- and stimulus-dependent imaging data toward elucidation of the physical transformations is an ubiquitous problem in multiple fields. Here, temperature-induced phase transition in BaTiO3 is explored using the machine learning ana ...

WILEY-V C H VERLAG GMBH2022

In situ control of the helical and skyrmion phases in Cu2OSeO3 using high-pressure helium gas up to 5 kbar

Henrik Moodysson Rønnow, Arnaud Magrez, Ivica Zivkovic, Jonathan White

We report a small-angle neutron scattering study of the helical and skyrmion lattice order in single-crystal Cu2OSeO3 under quasihydrostatic helium gas pressures up to 5 kbar. By using helium gas as the pressure-transmitting medium (PTM) we ensure pressure ...

AMER PHYSICAL SOC2020