Publications associées à Void Fraction Prediction in Annular Two-Phase Flow Using an Algebraic Turbulence Model

Publications associées (30)

Turbulence and Heat exchange in the Near-Surface Boundary Layer over Patchy Snow

The atmospheric layer adjacent to the earth's surface is of crucial importance for weather models due to the exchange of energy between the surface and the atmosphere. This exchange is dependent on the various surface properties and influences the state of ...

EPFL2024

A novel fatigue life prediction methodology based on energy dissipation in viscoelastic materials, synergistic effects of stress level, stress ratio, and temperature

Thomas Keller, Lulu Liu, Abdolvahid Movahedirad

This work introduces a new methodology to predict the fatigue life of viscoelastic materials by considering the creep effect on fatigue behavior under the concurrent effects of stress level, stress ratio, and temperature. The model established based on the ...

2024

Frictional weakening leads to unconventional singularities during dynamic rupture propagation

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Mathias Alexandre David Lebihain, Federica Paglialunga

Earthquakes i.e. frictional ruptures, are commonly described by singular solutions of shear crack motions. These solutions assume a square root singularity order around the rupture tip and a constant shear stress value behind it, implying scale-independent ...

2024

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

Drained Clay-Pipe Interface Resistance at Low Normal Stresses and Elevated Temperatures

Roba Houhou

Offshore pipelines that transport hydrocarbons under high pressure and high temperature are usually thermally insulated to maintain an elevated temperature and prevent any heat loss to the surroundings. However, the temperatures at the outer-wall of the pi ...

AMER SOC CIVIL ENGINEERS2023

Nanomechanical Modeling of the Bending Response of Silicon Nanowires

Yusuf Leblebici, Zuhal Tasdemir

Understanding the mechanical behavior of silicon nanowiresis essentialfor the implementation of advanced nanoscale devices. Although bendingtests are predominantly used for this purpose, their findings shouldbe properly interpreted through modeling. Variou ...

AMER CHEMICAL SOC2023

Three-Dimensional Numerical Modelling of Al-Salam Storm Water Pumping Station in Saudi Arabia

Azin Amini, Azad Koliji

The Al-Salam Pump Station will be constructed in the framework of Jeddah Storm water Masterplan (JSWM) in Saudi Arabia. The station discharges the incoming flow from the Al-Salam storm tunnel to the Red Sea. Its structure includes a circular deep wet well ...

IAHR2022

Experimental quantification of 3D deformations in sensitive clay during stress-probing

Edward Carlo Giorgio Andò

Unique four-dimensional (4D) deformation data are collected during drained triaxial tests on intact specimens of a natural sensitive clay. This requires the development of a miniature triaxial cell for advanced stress path testing, specifically designed fo ...

ICE PUBLISHING2022

Scaling Description of Creep Flow in Amorphous Solids

Matthieu Wyart, Thomas Willem Jan de Geus, Marko Popovic, Wencheng Ji

Amorphous solids such as coffee foam, toothpaste, or mayonnaise display a transient creep flow when a stress E is suddenly imposed. The associated strain rate is commonly found to decay in time as gamma_ -t-nu, followed either by arrest or by a sudden flui ...

AMER PHYSICAL SOC2022

Eulerian simulation of complex suspensions and biolocomotion in three dimensions

Yuexia Luna Lin

We present a numerical method specifically designed for simulating three-dimensional fluid-structure interaction (FSI) problems based on the reference map technique (RMT). The RMT is a fully Eulerian FSI numerical method that allows fluids and large-deform ...

National Academy of Sciences2022

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Jean-François Molinari, Roozbeh Rezakhani

The state of stress in plates, where one geometric dimensions is much smaller than the others, is often assumed to be of plane stress. This assumption is justified by the fact that the out-of-plane stress components are zero on the free-surfaces of a plate ...

ELSEVIER2022

Efficient equilibrium-based stress recovery for isogeometric laminated curved structures

Pablo Antolin Sanchez

This work extends the stress recovery for laminated composite solid plates, proposed in [1,2], to curved structures. Based on 3D Isogeometric Analysis (IGA) computations and equilibrium, this procedure uses a single element through the thickness in combina ...

ELSEVIER SCI LTD2021

Particle-size segregation and rheology coupling in dense granular flows

Tomás Alfredo Trewhela Palacios

Dense granular flows -debris or pyroclastic flows, avalanches, granular flows in heaps, silos or rotating drums-are ubiquitous to many natural and industrial processes. Their grain composition is often polydisperse, with particles differing in shape, size ...

EPFL2021

Reduction techniques for PDEs built upon Reduced Basis and Domain Decomposition Methods with applications to hemodynamics

Luca Pegolotti

This thesis focuses on the development and validation of a reduced order technique for cardiovascular simulations. The method is based on the combined use of the Reduced Basis method and a Domain Decomposition approach and can be seen as a particular imple ...

EPFL2021

Benchmark study of undrained triaxial testing of Opalinus Clay shale: Results and implications for robust testing

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Triaxial testing of argillaceous rocks and shales is significantly more challenging than conventional rock mechanical testing. The challenges are mainly related to the very low permeability of these geomaterials, and their sensitivity to exposure of atmosp ...

ELSEVIER2021

A novel fatigue life prediction methodology based on energy dissipation in viscoelastic materials

Thomas Keller, Ghazaleh Eslami

This paper introduces a new fatigue life prediction methodology for viscoelastic materials in the tension-tension fatigue loading region. The model was established based on the total amount of energy dissipated during fatigue loading, and offers two main a ...

ELSEVIER SCI LTD2021

Hydraulic Transport Through Calcite Bearing Faults With Customized Roughness: Effects of Normal and Shear Loading

Marie Estelle Solange Violay, Mateo Alejandro Acosta

Understanding fluid flow in rough fractures is of high importance to large scale geologic processes and to most anthropogenic geo‐energy activities. Here we conducted fluid transport experiments on Carrara marble fractures with a novel customized surface t ...

2020

Experimental studies of hydro-mechanical couplings in Enhanced Geothermal Reservoirs

Mateo Alejandro Acosta

Enhanced Geothermal Systems (EGS) allow for worldwide geothermal electricity production. They target deep (3-5 km), fractured rock reservoirs whose permeability is artificially increased through hydraulic stimulations (fluid injections). The injections mod ...

EPFL2020

Analysis of morphological and haemodynamical indexes in abdominal aortic aneurysms as preliminary indicators of intraluminal thrombus deposition

Alfio Quarteroni, Simone Deparis, Claudia Maria Colciago

In this paper we study the correlation between the Wall Shear Stress (WSS), a haemodynamical index derived from numerical simulations, and an new index MFA-ILT for the characterisation of intraluminal thrombus (ILT) in presence of abdominal aortic aneurysm ...

2020

Fast and accurate elastic analysis of laminated composite plates via isogeometric collocation and an equilibrium-based stress recovery approach

Pablo Antolin Sanchez

A novel approach which combines isogeometric collocation and an equilibrium-based stress recovery technique is applied to analyze laminated composite plates. Isogeometric collocation is an appealing strong form alternative to standard Galerkin approaches, ...

2019