Publications associées à Catalytic ozonation of oxalic acid using carbon nanofibres on macrostructured supports

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

An Overview of Heterogeneous Catalysts Based on Hypercrosslinked Polystyrene for the Synthesis and Transformation of Platform Chemicals Derived from Biomass

Lioubov Kiwi

Platform chemicals, also known as chemical building blocks, are substances that serve as starting materials for the synthesis of various value-added products, which find a wide range of applications. These chemicals are the key ingredients for many fine an ...

MDPI2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Cyclic Behaviour of Unidirectional Hybrid Interlayer Glass/Carbon and Carbon/Carbon Composites

Anastasios Vassilopoulos, José Manuel de Sena Cruz

The lack of ductility is a major drawback of fibre reinforced polymer (FRP) materials. As it is known, these materials are stiff and strong, but brittle with little or no warning before final failure. In the last decades, some solutions have been proposed ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

A Novel Method to Quantify Self-Healing Capabilities of Fiber-Reinforced Polymers

Véronique Michaud, Amaël Maximilien Cohades, Robin Samuel Trigueira, Cecilia Scazzoli

The present work investigates a novel and practical method to evaluate the healing efficiency of carbon-reinforced polymer composites. The method should be representative of damage occurring during the lifetime of a composite part, should tend to damage th ...

FRONTIERS MEDIA SA2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Thermally-Drawn Multi-Electrode Fibers for Bipolar Electrochemistry and Magnified Electrochemical Imaging

Fabien Sorin

Imaging systems using closed bipolar electrode (cBPE) arrays and electrochemiluminescence (ECL) have attracted great attention in recent years as a 2D imaging platform with high spatiotemporal resolution. However, the fabrication techniques for cBPE arrays ...

Wiley2021

Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites

Anastasios Vassilopoulos, José Manuel de Sena Cruz

This work investigates the quasi-static, low-cycle and fatigue behavior of hybrid glass/ultra-high modulus carbon (GC) and low modulus/ /high modulus carbon (CC) fiber composites. These pseudo-ductile unidirectional interlayer hybrids are a new type of com ...

2021

Mechanical properties of natural fiber composites produced using dynamic sheet former

Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic ...

2020

Assessment of capillary phenomena in liquid composite molding

Véronique Michaud, Baris Çaglar, Feyza Karasu Kiliç, Cem Tekin

The interplay between capillary and viscous forces plays a significant role for optimal part quality in fiber-reinforced composites manufactured by Liquid Composite Molding (LCM); these are however difficult to analyze during flow. Two approaches are propo ...

2019

Enhanced mineralization of atrazine by surface induced hydroxyl radicals over light-weight granular mixed-quartz sands with ozone

Stefanos Giannakis, Jun Ma, Da Wang, Shuang Song

A light-weight granular mixed-quartz sand (denoted as L-GQS) combined with stirring-assisted bubble column reactor was firstly applied in catalytic ozonation of atrazine. The L-GQS, with a density of 2.36 g cm(-3) and average diameter of ca. of 4 mm, was r ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure

John Botsis, Georgios Pappas, Fernando Naya Montans

Fiber reinforced polymers (FRPs) subjected to mode I fracture show important toughening due to the development of large scale bridging (LSB). Experimental studies of this phenomenon in unidirectional carbon/epoxy laminates using double cantilever beam spec ...

ELSEVIER SCI LTD2019

Crushing and intrusion resistance improvement of aluminum beams by carbon/epoxy composite patches

Véronique Michaud, Jonathan Friedli, Mathieu Piccand, Baris Çaglar, Yann Albert Gérard Lebaupin

This study investigates the intrusion and crushing performance of hybrid fiber metal laminates based on aluminum and carbon fiber reinforced polymers, in comparison to reference aluminum parts, made from AA6451 or AA7075 automotive grade alloys. A first se ...

ELSEVIER SCI LTD2019