Influence of F-Containing Materials on Perovskite Solar Cells

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Interface engineering has proven to be an effective approach for passivating interfacial imperfections to mitigate non-radiative recombination, but the subpar interface quality between the perovskite and the charge transport layer has hindered advancements ...

A deep understanding of how solution-processed solar cells (SSCs) perform under varying temperatures and irradiance is crucial for their optimal design, synthesis, and use. However, current partial spectral characterization, primarily below the band gap wa ...

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

Carbon perovskite solar cells (C-PSCs) represent a promising photovoltaic (PV) technology that addresses the long-term operating stability needed to compete with commercial Si solar cells. However, the poor interface contacts between the carbon electrode a ...

Direct understanding of the formation and crystallization of low-dimensional (LD) perovskites with varying dimensionalities employing the same bulky cations can offer insights into LD perovskites and their heterostructures with 3D perovskites. In this stud ...

Realizing high‐quality perovskite films through uniform defect passivation and crystallization control is pivotal to unlocking the potential of scalable applications. However, prevalent small‐molecule additives are inherently susceptible to the crystalliza ...

Halide perovskite nanocrystals are promising materials for optoelectronic applications. Metal doping provides an avenue to boost their performance further, e.g., by enhancing light emission, or to provide additional functionalities, such as nanoscale magne ...

This study presents a coupled techno-economic and environmental model of hybrid sensible-latent thermal energy storage (TES) systems, integrating phase change material (PCM) macro-capsules to enhance storage capacity and performance. The multi-scale model ...

Agrivoltaic systems are characterized by the co-existence of photovoltaic panels on agricultural land, allowing simultaneous solar energy and food production without need for further land. Agrivoltaic installations alter the local microclimatic conditions ...

Near‐infrared (NIR) light sources hold great potential for applications in night vision illumination, bio‐imaging, and non‐destructive testing. However, radiationless de‐activation and low absorption restrict the development of high‐efficiency blue light e ...

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techni ...

Herein, Cu(II)Pcs and Ni(II)Pcs peripherally tetra-functionalized with 5-hexylthiophene (HT), 5-hexyl-2,2 '-bithiophene (HBT), and tertbutyl groups (TB) are readily synthesized and employed as hole-transporting materials (HTMs) in mixed-ion perovskite ([FA ...

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

Hybrid perovskites are emerging as top contenders in the next generation of photovoltaics, yet their stability under operational conditions remains a significant challenge. Specifically, degradation occurs at the interface with charge transport layers in p ...

Hybrid perovskites stand out as one of the leading materials in the new generation of photovoltaics. Their stability under operating conditions, however, remains an ongoing challenge. In particular, aging at the interface with the charge transport material ...

Interface engineering has significantly boosted perovskite solar cell efficiency and stability. However, numerous approaches focus on addressing defects at the interfaces between transport layers while neglecting potential issues within the bulk perovskite ...

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

The stability of hybrid organic-inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low-dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provi ...

Combining the two technologies of tandem solar cells and bifacial solar cells has a great potential to maximize energy harvesting while minimizing material and surface usage. Mid-bandgap perovskites (1.50–1.60 eV) are important for fulfilling current match ...

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose conseque ...

Influence of F-Containing Materials on Perovskite Solar Cells

Chattez avec Graph Search

Localized Tunneling 1D Perovskitoid Passivated Contacts for Efficient and Stable Perovskite Solar Modules

Solar photons beyond the band gap wavelengths: their effect on solution-processed solar cells

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

High-Efficiency Carbon Perovskite Solar Cells via Cathode Interface Engineering by using CuPc Hole-Transporting Layers

Formation Dynamics of Thermally Stable 1D/3D Perovskite Interfaces for High-Performance Photovoltaics

Realizing Uniform Defect Passivation via Self‐Polymerization of Benzenesulfonate Molecules in Perovskite Photovoltaics

Metal Doping of Strongly Confined Halide Perovskite Nanocrystals under Ambient Conditions

Optimization of hybrid sensible-latent seasonal heat storage systems

Controls of Ecohydrological Grassland Dynamics in Agrivoltaic Systems

Valence and Site Engineering Enable Efficient Broadband Near‐Infrared Emission at 960 nm in Cr3+‐Activated Forsterite

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells

Cu(II) and Ni(II) Phthalocyanine-Based Hole-Transporting Materials for Stable Perovskite Solar Cells with Efficiencies Reaching 20.0%

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Supramolecular Modulation for Hybrid Perovskite Photovoltaics

Triarylamine Trisamide Interfacial Modulation for Perovskite Photovoltaics

Reconstruction of Electron-Selective Interface via Multifunctional Chemical Bridging Enables High-Performance Rigid and Flexible Perovskite Solar Cells

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

From Chalcogen Bonding to S-π Interactions in Hybrid Perovskite Photovoltaics

Bifacial perovskite/silicon heterojunction tandem solar cells based on FAPbI3-based perovskite via hybrid evaporation-spin coating

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells