Publications associées à Highly flexible CH3NH3PbI3 micro- and nanowires

Publications associées (28)

Metal Doping of Strongly Confined Halide Perovskite Nanocrystals under Ambient Conditions

Emad Oveisi, Aurélien Bornet, Pascal Alexander Schouwink, Sascha Feldmann, Tejas Deshpande, Zachary Andrew Vanorman

Halide perovskite nanocrystals are promising materials for optoelectronic applications. Metal doping provides an avenue to boost their performance further, e.g., by enhancing light emission, or to provide additional functionalities, such as nanoscale magne ...

American Chemical Society (ACS)2025

From Chalcogen Bonding to S-π Interactions in Hybrid Perovskite Photovoltaics

Ursula Röthlisberger, Dominik Józef Kubicki, Virginia Carnevali, Laura Piveteau, Nikolaos Lempesis, Mathias Dankl, Vladislav Slama, Lorenzo Agosta

The stability of hybrid organic-inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low-dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provi ...

WILEY2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

David Lyndon Emsley, Aditya Mishra, Michael Allan Hope, Manuel Cordova, Ümmügülsüm Günes

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Supramolecular Modulation for Hybrid Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Hong Zhang, Jovana Milic, Ghewa Alsabeh, Masaud Hassan S Almalki

Hybrid perovskites are emerging as top contenders in the next generation of photovoltaics, yet their stability under operational conditions remains a significant challenge. Specifically, degradation occurs at the interface with charge transport layers in p ...

2024

Triarylamine Trisamide Interfacial Modulation for Perovskite Photovoltaics

Runzhong Zhang, Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Ghewa Alsabeh

Hybrid perovskites stand out as one of the leading materials in the new generation of photovoltaics. Their stability under operating conditions, however, remains an ongoing challenge. In particular, aging at the interface with the charge transport material ...

Wiley2024

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose conseque ...

Wiley-V C H Verlag Gmbh2023

Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

Hiroaki Jinno, Felix Thomas Eickemeyer, Lukas Pfeifer

Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing ...

Wiley-V C H Verlag Gmbh2023

Buried Interface Engineering Enables Efficient and 1,960-hour Isos-L-2i Stable Inverted Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Felix Thomas Eickemeyer, Xiong Li, Mathias Dankl, Mingyang Wei, Virginia Carnevali, Nikolaos Lempesis, Lorenzo Agosta

High-performance perovskite solar cells (PSCs) typically require interfacial passivation, yet this is challenging for the buried interface, owing to the dissolution of passivation agents during the deposition of perovskites. Here, we overcome this limitati ...

Zenodo2023

Tuning Napththalenediimide Cations for Incorporation into Ruddlesden–Popper-Type Hybrid Perovskites

Jacques-Edouard Moser, Kevin Sivula, Jun Ho Yum, Liang Yao, Etienne Christophe Socie, Simon Nussbaum

Layered hybrid organic−inorganic perovskite (LHOIP) materials constructed with low-band-gap chromophore-based organic spacer cations are anemerging class of materials that promise unique tunability of their optoelectronic properties. However, the large siz ...

2022

Perovskite Solar Cells with Carbon-Based Electrodes - Quantification of Losses and Strategies to Overcome Them

Ulf Anders Hagfeldt, Bowen Yang, Jiajia Suo

Carbon-based electrodes represent a promising approach to improve stability and up-scalability of perovskite photovoltaics. The temperature at which these contacts are processed defines the absorber grain size of the perovskite solar cell: in cells with lo ...

WILEY-V C H VERLAG GMBH2022

Composition and Interface Engineering of High Performing Perovskite Solar Cells

Mousa Abdulla M E Abuhelaiqa

Perovskite solar cells have been established as a disruptive technology in the domain of photo-voltaics. Their facile, low-temperature processing and high-power conversion efficiency make them stand-out among other mature solar technologies. The performanc ...

EPFL2022

Intermediate phase engineering of halide perovskites for photovoltaics

Ulf Anders Hagfeldt, Zaiwei Wang

Metal halide perovskites serving as one of the most promising photovoltaic materials are gaining considerable attention worldwide. For achieving high performance as well as long-term stability of the perovskite solar cells (PSCs), a good quality of perovsk ...

CELL PRESS2022

Employing 2D-Perovskite as an Electron Blocking Layer in Highly Efficient (18.5%) Perovskite Solar Cells with Printable Low Temperature Carbon Electrode

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Hobeom Kim, So-Min Yoo, Jaekeun Lim

Interface engineering and passivating contacts are key enablers to reach the highest efficiencies in photovoltaic devices. While printed carbon-graphite back electrodes for hole-transporting material (HTM)-free perovskite solar cells (PSCs) are appealing f ...

WILEY-V C H VERLAG GMBH2022

Quantifying Stabilized Phase Purity in Formamidinium-Based Multiple-Cation Hybrid Perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mohammad Ibrahim Dar, Neha Arora, Thomas Paul Baumeler

A promising approach for the production of highly efficient and stable hybrid perovskite solar cells is employing mixed-ion materials. Remarkable performances have been reached by materials comprising a stabilized mixture of methylammonium (MA(+)) and form ...

2021

Advances in solution-processed near-infrared light-emitting diodes

Mohammad Khaja Nazeeruddin, Hobeom Kim

A summary of recent advances in the near-infrared light-emitting diodes that are fabricated by solution-processed means, with coverage of devices based on organic semiconductors, halide perovskites and colloidal quantum dots. ...

Nature Publishing Group2021

D-pi-A-Type Triazatruxene-Based Dopant-Free Hole Transporting Materials for Efficient and Stable Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Sanghyun Paek, Kasparas Rakstys, Cristina Roldán Carmona, Hobeom Kim, Cansu Igci

Three donor-pi-bridge-acceptor (D-pi-A)-type organic small molecules coded CI-B1, CI-B2, and CI-B3 are designed, synthesized, and used as dopant-free hole transporting materials (HTMs) for perovskite solar cells (PSCs). The strong electron-donating triazat ...

WILEY-V C H VERLAG GMBH2020

Cd-113 Solid-State NMR at 21.1 T Reveals the Local Structure and Passivation Mechanism of Cadmium in Hybrid and All-Inorganic Halide Perovskites

David Lyndon Emsley, Dominik Józef Kubicki, Daniel Prochowicz, Albert Hofstetter, Brennan James Walder

Cadmium doping has recently emerged as an efficacious strategy for defect suppression and band gap tuning in hybrid as well as all-inorganic halide perovskites. However, the cadmium speciation in these materials is unknown. Here, we use high-field cadmium- ...

2020

Formation and stabilization of all-inorganic perovskites for photovoltaics

Zaiwei Wang

All-inorganic perovskite films hold promise for improving stability of perovskite solar cells. However, the desirable narrow-bandgap inorganic perovskites (such as CsPbI3 and CsPbI2Br) are suffering from the thermodynamic phase instability, as the photoact ...

EPFL2020

alpha-CsPbI(3)Bilayers via One-Step Deposition for Efficient and Stable All-Inorganic Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Tom Theodorus Antonius Lummen, Yong Ding, Olga Syzgantseva, Xianfu Zhang

The emerging inorganic CsPbI(3)perovskites are promising wide-bandgap materials for application in tandem solar cells, but they tend to transit from a black alpha phase to a yellow delta phase in ambient conditions. Herein, a gradient grain-sized (GGS) CsP ...

Wiley2020