Publications associées à Tailoring the surface morphology of zinc oxide films for high-performance micromorph solar cells

Publications associées (37)

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Christophe Ballif, Antonin Faes, Marion Solange Madeleine Dussouillez, Christian Michael Wolff

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

2025

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Nikolaos Lempesis, Mingyang Wei, Virginia Carnevali, Lorenzo Agosta, Vladislav Slama

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improveme ...

NATURE PORTFOLIO2025

Visualising ionic screening in perovskite solar cells: a bumpy ride along the J–V curve

Frank Nüesch

The J–V bump and hysteresis in perovskite solar cells are studied combining measurement and simulation, linking them to spatial collection efficiency changes from ionic charge accumulation, as visualised in external quantum efficiency (EQE) spectra. ...

Royal Society of Chemistry (RSC)2025

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mingyang Wei, Likai Zheng

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conduct ...

Wiley-VCH Verlag GmbH2025

Facile and Low-Cost Design Alternative of Spiro-OMeTAD as p-Type Semiconductor for Efficient Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

A simple diphenylamine-based hole transporting material V1553 was synthesized and incorporated into a perovskite solar cell, which showed remarkable power conversion efficiency close to 23%. The investigated HTM was synthesized via one-step catalyst-free c ...

WILEY-V C H VERLAG GMBH2025

Buried SnI2 Induces Gradient Heterojunctions in Sn–Pb Perovskite Solar Cells

Chenxu Zhao

Tin–lead (Sn–Pb) mixed perovskite solar cells (PSCs) offer the potential for higher power conversion efficiency (PCE) than their pure lead counterparts. However, the lack of a well-defined Sn/Pb compositional profile results in disordered internal electric ...

American Chemical Society (ACS)2025

Aryl-Acetylene Layered Hybrid Perovskites in Photovoltaics

Christophe Ballif, Aïcha Hessler-Wyser, Michael Graetzel, Ursula Röthlisberger, Mostafa Rabie Shlaly Bahr Othman, Masaud Hassan S Almalki, Fatemeh Ansari, Felix Thomas Eickemeyer, Ghewa Alsabeh, Lukas Pfeifer, Christian Michael Wolff, Nikolaos Lempesis, Virginia Carnevali, Vladislav Slama, Andrea Vezzosi

Metal halide perovskites have shown exceptional potential in converting solar energy to electric power in photovoltaics, yet their application is hampered by limited operational stability. This stimulated the development of hybrid layered (two-dimensional, ...

WILEY-V C H VERLAG GMBH2025

Spiro-Phenothiazine Hole-Transporting Materials: Unlocking Stability and Scalability in Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jaeki Jeong, Likai Zheng

Improving both the efficiency and long-term stability of perovskite solar cells (PSCs) is critical for their commercial deployment. Despite the widespread use of spiro-OMeTAD as a hole-transporting material (HTM), its inhomogeneous doping behavior and susc ...

2025

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Anwar Qasem M Alanazi, Masaud Hassan S Almalki

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

Hybrid Ag-mesh/Ta-doped TiO2 thin film configuration as a visible and near-infrared transparent electrode

Andreas Schueler, Jérémy Jacques Antonin Fleury, Krishna Manwani

This study focuses on the fabrication of a hybrid Ag-mesh/Ta-doped TiO2 (TTO) electrode that has a low sheet resistance and high transparency in the visible and near-infrared region, thereby holding significant commercialization potential. Here, ∼82 nm thi ...

2025

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Christophe Ballif, Aïcha Hessler-Wyser, Quentin Thomas Jeangros, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Christian Michael Wolff, Anaël Morgane Jaffrès, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024

Gate-Tunable Hole Transport in In-Plane Ge Nanowires by V-Groove Confined Selective Epitaxy

Alok Rudra, Anna Fontcuberta i Morral, Santhanu Panikar Ramanandan, Victor Carle Adrien Boureau, Shelly Ben David

Germanium (Ge) nanowires hold great promise as building blocks for hole spin-based quantum processors. Realizing this potential requires their direct integration onto silicon (Si) wafers. This work introduces V-groove-confined selective epitaxy to enable t ...

WILEY-V C H VERLAG GMBH2025

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

Testing the accuracy and convergence of scattering calculations using Lorentz reciprocity

Olivier Martin, Andrei Kiselev

We present a simple and versatile approach to test the accuracy of scattering calculations. Based on the Lorentz reciprocity relation, this criterion can be used for any scattering object, especially where a reference solution (e.g. from Mie theory) does n ...

Optica Publishing Group2025

A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Olatz Arriaga Arruti

Silicon heterojunction (SHJ)-solar modules-when encapsulated with ethylene vinyl acetate (EVA)-are known to be extremely sensitive to water ingress. The reason for this is, however, not clear. Here, we explain the root causes of this degradation mechanism ...

Cell Press2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

Manuel Cordova, David Lyndon Emsley, Aditya Mishra, Michael Allan Hope, Ümmügülsüm Günes

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024

Elimination of buried interfacial voids for efficient perovskite solar cells

Bin Ding, Xianfu Zhang

Establishing optimal interfacial contact is crucial for enhancing the efficiency of perovskite solar cells (PSCs). However, formation of voids at buried interface of perovskite films often hinders this critical objective. Our investigation reveals that the ...

Elsevier2024

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Utilization of small molecules as passivation materials for perovskite solar cells (PSCs) has gained significant attention recently, with hundreds of small molecules demonstrating passivation effects. In this study, a high-accuracy machine learning model i ...

Wiley-VCH Verlag Gmbh2024

Enhancing Efficiency of Industrially-Compatible Monolithic Perovskite/Silicon Tandem Solar Cells with Dually-Mixed Self-Assembled Monolayers

Mohammad Khaja Nazeeruddin, Peng Gao

The antisolvent-assisted spin-coating still lags behind the thermal evaporation method in fabricating perovskite films atop industrially textured silicon wafers in making monolithic perovskite/silicon solar cells (P/S-TSCs). The inhomogeneity of hole-selec ...

Wiley-V C H Verlag Gmbh2024