Publications associées à A comparative performance analysis of stand-alone, off-grid solar-powered sodium hypochlorite generators

Publications associées (37)

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

Template-Assisted Growth of CsxFA1-xPbI3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells

Christian Michael Wolff, Kerem Artuk

Cesium-formamidinium lead iodide (CsxFA1-xPbI3) perovskites are a promising methylammonium-free alternative for efficient single-junction solar cells. However, they have not been fully explored by vapor-phase deposition techniques. Herein, a template-assis ...

2025

High‐Efficiency Sn‐Pb Perovskite Solar Cells via Nucleation and Crystallization Control

Mohammad Khaja Nazeeruddin

The rapid crystallization of mixed tin‐lead (Sn‐Pb) perovskites and their dependence on antisolvent processes limit the development of large‐area Sn‐Pb perovskite solar cells (PSCs). Vacuum‐flash‐assisted solution processing (VASP) has emerged as a promisi ...

Wiley2025

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Guixiang Li

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

ELSEVIER2025

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Mohammad Khaja Nazeeruddin, Emad Oveisi

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within ...

2025

Environmental implications of solid oxide fuel cell system for hydrogen sustainability

François Maréchal, Jan Van Herle, Shivom Sharma, Xinyi Wei, Du Wen, Arthur Waeber

Hydrogen, known for its high energy content and clean combustion, is promising in the energy transition. This study explores the environmental impact of a solid oxide fuel cell (SOFC) system. 1 kg of hydrogen production at 1 bar serves as the functional un ...

2025

Enhancing Indoor Photovoltaic Eﬃciency to 37.6% Through Triple Passivation Reassembly and n-Type to p-Type Modulation in Wide Bandgap Perovskites

Michael Graetzel, Lukas Pfeifer

Despite well‐matching indoor illumination spectra, the performance of wide bandgap perovskite solar cells (WB‐PSCs) for indoor photovoltaics (i‐PV) is hindered by photo‐induced halide phase segregation and trap‐assisted non‐radiative recombination. Herein, ...

Wiley2025

Configuring a Liquid State High-entropy Metal Alloy Electrocatalyst

Anirudh Raju Natarajan

A high-entropy liquid metal alloy (Ga-Fe-Zn-Sn-Bi-Ni) is developed to address the multi-step complexity of green ammonia electrosynthesis from nitrate. Guided by molecular dynamics, design of experiments, and density functional theory, this alloy exploits ...

WILEY-V C H VERLAG GMBH2025

Monolayer-Thick GaN/AlN Quantum Well Anodes and Far-UVC Field Emission Device at 226 nm

Nicolas Grandjean, Jean-François Carlin, Pierre Jean-François Jules Demolon

Far-UVC light sources in the spectral range of200-230 nm effectively kill bacteria and deactivate viruses while being not harmful to health, enabling persistent disinfection of air and surfaces in the presence of humans. So far only excimer lamps have been ...

IEEE2025

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

Elimination of buried interfacial voids for efficient perovskite solar cells

Bin Ding, Xianfu Zhang

Establishing optimal interfacial contact is crucial for enhancing the efficiency of perovskite solar cells (PSCs). However, formation of voids at buried interface of perovskite films often hinders this critical objective. Our investigation reveals that the ...

Elsevier2024

A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Olatz Arriaga Arruti

Silicon heterojunction (SHJ)-solar modules-when encapsulated with ethylene vinyl acetate (EVA)-are known to be extremely sensitive to water ingress. The reason for this is, however, not clear. Here, we explain the root causes of this degradation mechanism ...

Cell Press2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Kléber Nicolet-dit-Félix, Christophe Ballif, Matthieu Despeisse, Aïcha Hessler-Wyser, Jacques Levrat, Antonin Faes, Gianluca Cattaneo, Umang Bhupatrai Desai, Fahradin Mujovi

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Tracking deep-level defects in degrading perovskite solar cells with a multifactorial approach

Vivek Subramanian

In this work, we provide a mechanistic understanding of the degradation of perovskite solar cells in operation by focusing on methylammonium lead triiodide (CH3NH3PbI3 or MAPbI3) and tracking the evolution of electronic defects via photo-induced current tr ...

Elsevier2024

Network time series forecasting in photovoltaics power production

Jelena Simeunovic

Accurate forecasting of photovoltaic (PV) power production is crucial for the integration of more renewable energy sources into the power grid. PV power production is highly intermittent, due to the stochastic cloud behaviour and cloud dynamics. Previous w ...

EPFL2024

Investigating Non-equilibrium Physics in Wide Bandgap Semiconductors and Quantum Materials via Ultrafast Spectroscopy

Hui-Yuan Chen

This thesis uses femtosecond laser spectroscopy in studying strong correlation in condensed matters that are pertinent to future technology: a wide bandgap perovskite and a quantum material, with the employment of ultrafast time-resolved spectroscopy in th ...

EPFL2024

Multifunctional sulfonium-based treatment for perovskite solar cells with less than 1% efficiency loss over 4,500-h operational stability tests

Ulf Anders Hagfeldt, Bowen Yang, Jiajia Suo, Yeonju Kim

The stabilization of grain boundaries and surfaces of the perovskite layer is critical to extend the durability of perovskite solar cells. Here we introduced a sulfonium-based molecule, dimethylphenethylsulfonium iodide (DMPESI), for the post-deposition tr ...

Nature Portfolio2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra, Kai Zhu

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

Reliability and Long-term Performance of Building Integrated Photovoltaic (BIPV) Modules

Ebrar Özkalay

Solar photovoltaics (PV) is one of the most competitive renewable energy technologies in order to meet the increasing global energy demand and decrease CO2 emissions by competing effectively with fossil fuels. One of the important applications of PV energy ...

EPFL2024

Integration of Metal Meshes as Transparent Conducting Electrodes into Perovskite Solar Cells

Andreas Schueler, Jérémy Jacques Antonin Fleury, René Uwe Schneider, Jakob Heier, Chiara Ongaro

As the demand for photovoltaic technologies continues to grow, the quest for efficient and sustainable transparent conducting electrodes (TCEs) rapidly rises. Traditional solutions, such as indium tin oxide (ITO), face challenges related to indium scarcity ...

Wiley2024