Publications associées à Three-dimensional amorphous silicon solar cells on periodically ordered ZnO nanocolumns

Publications associées (38)

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

High‐Efficiency Sn‐Pb Perovskite Solar Cells via Nucleation and Crystallization Control

Mohammad Khaja Nazeeruddin

The rapid crystallization of mixed tin‐lead (Sn‐Pb) perovskites and their dependence on antisolvent processes limit the development of large‐area Sn‐Pb perovskite solar cells (PSCs). Vacuum‐flash‐assisted solution processing (VASP) has emerged as a promisi ...

Wiley2025

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Guixiang Li

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

ELSEVIER2025

Template-Assisted Growth of CsxFA1-xPbI3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells

Christian Michael Wolff, Kerem Artuk

Cesium-formamidinium lead iodide (CsxFA1-xPbI3) perovskites are a promising methylammonium-free alternative for efficient single-junction solar cells. However, they have not been fully explored by vapor-phase deposition techniques. Herein, a template-assis ...

2025

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Mohammad Khaja Nazeeruddin, Emad Oveisi

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within ...

2025

Beyond Flat: Undulated Perovskite Solar Cells on Microscale Si Pyramids by Solution Processing

Christophe Ballif, Aïcha Hessler-Wyser, Christian Michael Wolff, Kerem Artuk, Mostafa Rabie Shlaly Bahr Othman, Deniz Türkay

Microscale pyramids of silicon solar cells are often considered incompatible with solution-processed perovskite films. Thus, solution processing has mainly been used with submicron pyramids that are buried under thick perovskite films with flattened front ...

AMER CHEMICAL SOC2025

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Parnian Ferdowsi, Kevin Sivula, Jun Ho Yum, Jiyoun Seo

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra, Kai Zhu

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Anaël Morgane Jaffrès, Christophe Ballif, Quentin Thomas Jeangros, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Masaud Hassan S Almalki, Anwar Qasem M Alanazi

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Olatz Arriaga Arruti

Silicon heterojunction (SHJ)-solar modules-when encapsulated with ethylene vinyl acetate (EVA)-are known to be extremely sensitive to water ingress. The reason for this is, however, not clear. Here, we explain the root causes of this degradation mechanism ...

Cell Press2024

Methylammonium Nitrate-Mediated Crystal Growth and Defect Passivation in Lead Halide Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Kevin Sivula, Jun Ho Yum, Yeonju Kim

Additive engineering has been a crucial strategy to improve photovoltaic properties by reducing carrier trap centers or increasing carrier diffusion lengths in the lead halide perovskite active layer. We introduced a small amount of CH3NH3 +NO3 - (methylam ...

Amer Chemical Soc2024

The predictive power of NLP models on Perovskite solar cells: BERTforPSC

Mohammad Khaja Nazeeruddin, François Maréchal, Naveen Bhati

With the advent of ChatGPT, natural language processing (NLP) models have gained tremendous interest from the research community and have been applied to a plethora of scientific domains like batteries, pharmaceuticals, recycling plastics, etc., to obtain ...

Elsevier2024

Tracking deep-level defects in degrading perovskite solar cells with a multifactorial approach

Vivek Subramanian

In this work, we provide a mechanistic understanding of the degradation of perovskite solar cells in operation by focusing on methylammonium lead triiodide (CH3NH3PbI3 or MAPbI3) and tracking the evolution of electronic defects via photo-induced current tr ...

Elsevier2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

David Lyndon Emsley, Aditya Mishra, Michael Allan Hope, Manuel Cordova, Ümmügülsüm Günes

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Kléber Nicolet-dit-Félix, Christophe Ballif, Matthieu Despeisse, Aïcha Hessler-Wyser, Jacques Levrat, Antonin Faes, Gianluca Cattaneo, Umang Bhupatrai Desai, Fahradin Mujovi

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024