Publications associées à Cu-based p-type Oxide Photocathodes for Solar Hydrogen Production : a Study on Photoelectrochemical Performance and Stability

Publications associées (47)

Environmental implications of solid oxide fuel cell system for hydrogen sustainability

François Maréchal, Jan Van Herle, Shivom Sharma, Xinyi Wei, Du Wen, Arthur Waeber

Hydrogen, known for its high energy content and clean combustion, is promising in the energy transition. This study explores the environmental impact of a solid oxide fuel cell (SOFC) system. 1 kg of hydrogen production at 1 bar serves as the functional un ...

2025

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Michele Morgante

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

EPFL2024

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Guixiang Li

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

ELSEVIER2025

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora, Roberto Valenza

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...

Royal Soc Chemistry2024

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Mohammad Khaja Nazeeruddin, Emad Oveisi

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within ...

2025

Stability and degradation of (oxy)nitride photocatalysts for solar water splitting

Sophia Haussener, Franky Esteban Bedoya Lora

Advancing towards alternative technologies for the sustainable production of hydrogen is a necessity for the successful integration of this potentially green fuel in the future. Photocatalytic and photoelectrochemical water splitting are promising concepts ...

2024

Gate Driver Power Supply With Low-Capacitance-Coupling and Constant Output Voltage for Medium-Voltage SiC MOSFETs

Rui Wang

With the development of wide band-gap devices, Silicon Carbide (SiC) semiconductor devices in 10 kV–15 kV voltage class offer potentials in medium-voltage (MV) systems. To ensure reliable operation of these MV SiC devices, gate driver power supplies must m ...

2025

Assessing the Charge Carrier Dynamics at Hybrid Interfaces of Organic Photoanodes for Solar Fuels

Kevin Sivula, Yongpeng Liu, Han-Hee Cho

Organic semiconductors (OSCs) have emerged as promising active layers for photoanodes to drive photoelectrochemical (PEC) oxidation reactions. Interfacing an OSC with an inorganic electron transport layer (ETL) is key to enabling both high performance and ...

Amer Chemical Soc2024

Direct laser writing of electronically conductive microstructures within soft hydrogel substrates

Veronica Navello, Stéphanie Lacour, Esther Amstad, Outman Akouissi, Lorenzo Lucherini

Hydrogels have emerged as promising materials for bioelectronic interfaces due to their tissue-like properties and high-water content. However, conventional hydrogels often suffer from poor electrical conductivity and mechanical stability, limiting their p ...

2025

Reversible photo-electrochemical device for solar hydrogen and power generation

Sophia Haussener, Saurabh Yuvraj Tembhurne, Alexandre Dominique M. Cattry, Matthieu Jonin, Mahendra Patel

A reversible photo-electrochemical device operating under concentrated irradiation could offer a stand-alone solution for producing solar fuel (in photo-driven electrolysis mode) and power (in fuel cell mode). This strategy would present the advantage of h ...

2024

Template-Assisted Growth of CsxFA1-xPbI3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells

Christian Michael Wolff, Kerem Artuk

Cesium-formamidinium lead iodide (CsxFA1-xPbI3) perovskites are a promising methylammonium-free alternative for efficient single-junction solar cells. However, they have not been fully explored by vapor-phase deposition techniques. Herein, a template-assis ...

2025

Phase-stable indium sulfide achieves an energy conversion efficiency of 14.3% for solar-assisted carbon dioxide reduction to formate

Michael Graetzel, Jingshan Luo, Jing Gao, Jun Li

Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...

Cell Press2024

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

Mohammad Khaja Nazeeruddin

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Plasma-activated water retains antimicrobial properties against Escherichia coli after 72 h of storage

Laurens Joachim Balthazar Pipoz, Ivo Furno, Fabio Avino, Rita Agus, Brayden Graham Myers, Aleksandra Lavrikova

Plasma-activated water (PAW) is increasingly recognized for its bactericidal properties. To advance this technology toward practical applications and deepen the understanding of its mechanisms, it is crucial to study the storage stability of PAW, focusing ...

IOP Publishing Ltd2025

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

Configuring a Liquid State High-entropy Metal Alloy Electrocatalyst

Anirudh Raju Natarajan

A high-entropy liquid metal alloy (Ga-Fe-Zn-Sn-Bi-Ni) is developed to address the multi-step complexity of green ammonia electrosynthesis from nitrate. Guided by molecular dynamics, design of experiments, and density functional theory, this alloy exploits ...

WILEY-V C H VERLAG GMBH2025

Print-light-synthesis of electrocatalytically active gas diffusion electrodes for fuel cell applications

Hubert Girault, Kumar Varoon Agrawal, Luc Sébastien Bondaz

The present work reports a simple approach to manufacture electrocatalytically active gas diffusion electrodes (GDEs) in two steps: (i) inkjet printing and (ii) flash light irradiation from a xenon flash lamp, a process called Print-light-synthesis (PLS). ...

Royal Society of Chemistry2025

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Zoé Mury, Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

High‐Efficiency Sn‐Pb Perovskite Solar Cells via Nucleation and Crystallization Control

Mohammad Khaja Nazeeruddin

The rapid crystallization of mixed tin‐lead (Sn‐Pb) perovskites and their dependence on antisolvent processes limit the development of large‐area Sn‐Pb perovskite solar cells (PSCs). Vacuum‐flash‐assisted solution processing (VASP) has emerged as a promisi ...

Wiley2025