Publications associées à The Pavilions at the Alhambra’s Court of the Lions: Graphic Analysis of Muqarnas

Tool Developments in the OpenMC Code: Correlated Sampling and Transient Fission Matrix Approach Coupled to OpenFOAM

Thomas Jean-François Ligonnet, Axel Guy Marie Laureau, Elsa Merle

This article outlines the advancements made in broadening the application scope of the OpenMC neutron transport code to include thermohydraulic coupling and nuclear data uncertainty propagation. These developments primarily involve the incorporation of the ...

Taylor & Francis Inc2024

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Jonas De Jesus Diaz Gomez

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

EPFL2023

Cockroach: an open-source tool for point cloud processing in cad

Yves Weinand, Julien Gamerro, Andrea Settimi, Petras Vestartas

In the architecture, engineering and construction (AEC) sector, the use of point cloud data is not a novelty. Usually employed to retrieve data for inspecting construction sites or retrofitting pre-existing buildings, sensors like LiDAR cameras have been k ...

Association for Computer-Aided Architectural Design Research in Asia (CAADRIA)2022

From kirigami to hydrogels: a tutorial on designing conformally transformable surfaces

Yue Wang, Yingying Ren, Tian Chen

Elastic surfaces that morph between multiple geometrical configurations are of significant engineering value, with applications ranging from the deployment of space-based PV arrays, the erection of temporary shelters, and the realization of flexible displa ...

2023

Bending strain in 3D topological semi-metals

Amelia Emily-Kay Estry, Xiangwei Huang, Philip Johannes Walter Moll, Jonas De Jesus Diaz Gomez, Matthias Carsten Putzke

We present an experimental set-up for the controlled application of strain gradients by mechanical piezoactuation on 3D crystalline microcantilevers that were fabricated by focused ion beam machining. A simple sample design tailored for transport character ...

IOP Publishing Ltd2022

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Christian Leinenbach, Roland Logé, Efthymios Polatidis, Markus Strobl

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

Experimental quantification of 3D deformations in sensitive clay during stress-probing

Edward Carlo Giorgio Andò

Unique four-dimensional (4D) deformation data are collected during drained triaxial tests on intact specimens of a natural sensitive clay. This requires the development of a miniature triaxial cell for advanced stress path testing, specifically designed fo ...

ICE PUBLISHING2022

Effects of resonator geometry and substrate stiffness on the tunability of a deformable microwave metasurface

Taha Goudarzi, Romain Christophe Rémy Fleury, Rayehe Karimi Mahabadi

Tunable metasurfaces can shift their resonant frequency through different approaches, one of which is applying mechanical deformations. Here, we show the effects of two key factors on the tunability of deformable metasurfaces; the resonator geometry and su ...

2022

An a posteriori error estimator for isogeometric analysis on trimmed geometries

Ondine Gabrielle Chanon, Annalisa Buffa, Rafael Vazquez Hernandez

Trimming consists of cutting away parts of a geometric domain, without reconstructing a global parametrization (meshing). It is a widely used operation in computer-aided design, which generates meshes that are unfitted with the described physical object. T ...

2022

Computational Inverse Design of Surface-based Inflatables

Mark Pauly, Francis Julian Panetta, Florin Isvoranu, Tian Chen

We present a computational inverse design method for a new class of surface-based inflatable structure. Our deployable structures are fabricated by fusing together two layers of inextensible sheet material along carefully selected curves. The fusing curves ...

2021

Probing the buckling of pressurized spherical shells

Pedro Miguel Nunes Pereira de Almeida Reis, Dong Yan, Arefeh Abbasi

The prediction of the critical buckling conditions of shell structures is plagued by imperfection sensitivity. Non-destructive testing through point-load probing has been recently proposed to map the stability landscape of cylindrical shells. However, the ...

2021

A Minimal Stabilization Procedure for Isogeometric Methods on Trimmed Geometries

Annalisa Buffa, Riccardo Puppi, Rafael Vazquez Hernandez

Trimming is a common operation in computer aided design and, in its simplest formulation, consists in removing superfluous parts from a geometric entity described via splines (a spline patch). After trimming, the geometric description of the patch remains ...

2020

A framework to automate the design of digitally-fabricated timber plate structures

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

The current study uses knowledge from digital architecture, computer science, engineering informatics, and structural engineering to formulate an algorithmic framework for integrated Computer-Aided Design (CAD) and Computer-Aided Engineering (CAE) of Integ ...

2021

Mechanical Characterization of Integrally-Attached Timber Plate Structures: Experimental studies and macro modeling technique

Aryan Rezaei Rad

Spurred by the recent advancements in Computer-Aided Design (CAD), Integral Mechanical Attachment (IMA) technique has been resurrected. Using IMAs, connections between timber elements are established through their form, instead of using additional connecto ...

EPFL2020

Macroscopic Model for Spatial Timber Plate Structures with Integral Mechanical Attachments

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

The use of integral mechanical attachments (IMAs) in spatial free-form timber plate structures has been revitalized by the production of engineered boards and recent developments in digital fabrication and computer-aided design. Despite the widespread inte ...

2020

A detailed view on the rebar–to–concrete interaction based on refined measurement techniques

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Simplified assumptions have traditionally been made on the rebar–to–concrete interaction in structural concrete to calculate the stress state in rebars. Such assumptions typically consider a uniform stress state in the reinforcement at a given cross sectio ...

2020

New Drawings of the Alhambra: Deformations of Muqarnas in the Pendentives of the Sala de la Barca

Ignacio Ferrer Perez-Blanco

Architectural heritage preservation and sustainability need advanced graphic techniques in order to document and understand the disposition/composition of plaster muqarnas, a fragile construction element. The muqarnas are key elements in the Nasrid archite ...

2019

A Grammar of Muqarnas: Drawings of the Alhambra by Jones and Goury (1834-1845)

Ignacio Ferrer Perez-Blanco

The muqarnas of the Nasrid Alhambra stand out as one of the most singular architectural episodes o f Medieval Islamic art due to their sophisticated three-dimensional construction, whose layout remains little known. In 1834 and 1837, the architects Owen Jo ...

2019

Volume change characteristics of fine-grained soils due to sequential thermo-mechanical stresses

Alessio Ferrari, Rakshith Shetty

Know-how of volume change characteristics, VCC, of the fine-grained soils, exposed to thermal stresses, is essential for design of various thermo-active structures. These stresses are known to induce excess pore-water pressure, Δu θ , in the saturated stat ...

2019

Following Microstructures during Deformation: In situ X-ray/Neutron Diffraction and HRDIC

Helena Van Swygenhoven, Efthymios Polatidis

The mechanical behavior of three engineering materials is studied employing in situ deformation methods. The study covers metastable austenitic steels with different stacking fault energies during multiaxial loading, a Ti-6Al-4V alloy processed by electron ...

IOP PUBLISHING LTD2019