Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Simon HolzerHi, I am Simon Holzer. I received my B.Sc. and M.Sc. degrees in mechanical engineering with a focus on microtechnology from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2020 and 2022, respectively. I am currently working towards Ph.D. in the Integrated Actuators Laboratory (LAI) at EPFL in Neuchâtel, Switzerland. My research interests lie in the field of soft robotics, artificial muscles, and biomechanics.
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Marianne LiebiEnseignement et PhD Doctorant·es actuel·les Atreyee Acharya, Dominique Olivier Windisch, Sici Wang, Torne Tänzer, Else Linnea Rensmo, Carolina Gutierrez Bolaños Cours Material science at large scale facilities MSE-435 Ce cours donne une introduction à la recherche sur les matériaux utilisant les rayons X et les neutrons. Après une introduction aux grands instruments de recherche, nous plongerons dans les différentes méthodes, y compris des exemples d'application dans divers domaines de la
Stefana ParaschoEnseignement et PhD Doctorant·es actuel·les Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Cours Capitalizing on Uncertainty AR-809 Digital design and making: A critical introduction AR-503 Le cours présente des méthodes de conception et de fabrication numériques en combinant des compétences techniques avec des connaissances théoriques et une réflexion critique. Les sujets incluent: la programmation pour la conception, la fabr
Victor Carle Adrien BoureauExpertise
Aberration-corrected TEM and STEMQuantative microscopyElectron diffractionStrain mapping (GPA, precession 4D-STEM)Electric and magnetic field mapping (electron holography, DPC, 4D-STEM)
Enseignement et PhD A co-dirigé les thèses EPFL de Pierpaolo Ranieri Cours Scanning and Analytical Transmission Electron Microscopy MSE-735 Transmission electron microscopy and diffraction (a) MSE-637(a) This course is for potential new users of transmission electron microscopes for
Junrui ChenJunrui Chen was born in 1995 in Jinhua, China.
He achieved his BSc. in mechanism and its automation from Beihang University(BUAA), Beijing in 2017. Meanwhile, he also gets a second degree in Business administration and management. He graduated with MSc. at Karlsruhe Institute of Technology (KIT), Germany in 2021, majored in medical technology (IBT, Instituts für Biomedizinische Technik) and Biomems technology (IMT, Institute of Microstructure Technology).
In March 2022 he joined Integrated Circuits Laboratory (ICLAB) at EPFL and is currently pursuing his Ph.D. in Microsystems and Microelectronics under the supervision of Prof. Sandro Carrara. His current research field is based on silicon memristive nanowire, which is a cross-discipline project supported by expertise in Microstructure technology, promoted by a solid background in Machinery and Electronics, and supplemented by programming skills.
Vivek SubramanianEnseignement et PhD Doctorant·es actuel·les Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar A dirigé les thèses EPFL de Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed A co-dirigé les thèses EPFL de Mohammad Jafarpour Cours Organic and printed electronics MICRO-505 Ce cours traite de la mise en œuvre des technologies de l'électronique organique et imprimée: les matériaux, les procédés d'impression
Francesca RodinoExpertise
Electrochemical BiosensorsSensors and Biosensors interfaces | front-end electronicsBiomedical circuits and systems
RechercheOther Tavakolidakhrabadi, A., Domange, T., Nalm, C., Rodino, F., Meimandi, A., Bessire, C., & Carrara, S. (2024). A Novel Microfluidic System for Capacitive Detection via Magnetophoretic Separation of Malaria-Infected Red Blood Cells. IEEE Sensors Letters. DOI: 10.1109/LSENS.2024.3451238Barbruni, G. L., Rodino, F., Ros, P. M., Demarchi, D., Ghezzi, D., & Carrara, S. (2024). A
Julie Nathalie S GheysenEnseignement et PhD Cours Comportement mécanique des matériaux MSE-234 Ce cours est une introduction au comportement mécanique, à l'élaboration, à la structure et au cycle de vie des grandes classes de matériaux de structure (métaux, polymères, céramiques et composites) Matériaux MSE-171 Une introduction à la science des matériaux appliquée aux matériaux de construction courants, en particulier le béton et les métaux. Description de leur fabrication, leurs comportements mécan
Junsoo KimExpertise
Artificial Muscles, Electrostatic Actuators, Wearable Robotics, Humanoid Robotics
Cyril Felix MonetteFormation Biorobotique | 2021 – 2022 University of Bristol Microtechnique | 2018 – 2021 EPFL Ingénierie civile | 2017 – 2018 Université Catholique de Louvain
Prix et distinctions Teaching Assistant Award EPFL School of Engineering 2025 Biorobotics Best Student prize Awarded by the University of Bristol Engineering Mathematic Department to the student who achieved the highest overall mark in their cohort. 2023 Bristol PLUS Award Awarded by the Un
Daniel Alexander Florez OrregoEnseignement et PhD Doctorant·es actuel·les Vibhu Baibhav Cours Advanced energetics ME-451 Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Gloria PorroExpertise
Microfluidics; point-of-care diagnostics; lab-on-chip; bioanalytics; bead-based assays; dielectrophoresis; particle sorting; deterministic lateral displacement.
Current work
Currently developing micro-electromechanical actuators for microparticle manipulation in microfluidics. We are exploiting regular arrangements of three-dimensional electrodes in microchannels as active modules to perform complex bioanalytical steps in a lab-on-chip compact and automatized format. In particular, we aim at apply
