Recherche

Afficher tous les résultats pour

Accueil

Personne

Andreas Mortensen

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (137)

Page 2 sur 7

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres

Andreas Mortensen, Andreas Rossoll, Benedikt Moser

The tensile failure of unidirectional alumina fibre reinforced aluminium is studied in uniaxial loading along the fibre axis. The tensile strength is measured as a function of matrix yield strength, which is varied by varying the testing temperature, from ...

2012

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

Al2O3 particle rounding in molten copper and Cu8wt%Al

Andreas Mortensen

We investigate processing-microstructure relationships in the production of Al2O3 particle reinforced copper composites by solidification processing. We show that during production of the composites by gas-pressure infiltration of packed Al2O3 particle pre ...

Springer US2012

Influence of Testing Temperature on the Mechanical Performance of Brazed Conventionally and Additively Manufactured 316L Stainless Steel Joints

Andreas Mortensen, Raphaël Charvet

In this work, brazed joints between samples of 316L stainless steel (316LSS) are formed using the Ag155 brazing filler metal. As an additional aspect of the investigation, the joints combine stainless steel formed by conventional processing and by additive ...

Wiley2025

Multiaxial yield behaviour of Al replicated foam

Andreas Mortensen, Raphaël Charvet

Multiaxial experiments are performed on replicated aluminium foam using a custom-built apparatus. The foam structure is isotropic, and features open monomodal pores 75 mu m in average diameter. Plane stress (sigma(1), sigma(2), sigma(3) = 0) and axisymmetr ...

Elsevier2011

Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites

Andreas Mortensen, Ludger Weber, Christian Monachon, Masahiro Kida

Aluminum nitride (AlN) particle reinforced metal-matrix-composites produced by pressure infiltration are characterized in terms of their thermal conductivity. The composites are designed to cover a wide range of phase contrast between the dispersed particl ...

American Institute of Physics2011

Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds

Andreas Mortensen, Volker Gass, Florian Thibaut Gallien

A process is presented for the production of periodic cellular structures based on investment casting of Al-12 wt%Si alloy within a mould that is made of table salt (NaCl) packed around a sacrificial PLA polymer template. Moulding begins by pouring salt gr ...

2022

Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime

Andreas Mortensen, Ludger Weber, David Ingram, Alexandros Athanasiou-Ioannou

We extend here a “bottleneck” flow model derived earlier for incompressible fluids flowing under creeping flow conditions [Despois, J. and Mortensen, A: Acta Materialia 53 (2005) 1381] to flow regimes where inertial losses are no longer negligible, causing ...

Elsevier2017

Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites

Andreas Mortensen, Ludger Weber, Reza Tavangar Hamzehkolaei, Ghodratollah Roudini

Pore-free composites combining alumina particles within a matrix of pure aluminium are produced by pressure infiltration, varying systematically the degree of the contiguity, beta, of the ceramic phase by sintering prior to infiltration. The thermal expans ...

2010

Ductile-to-brittle transition in tensile failure of particle reinforced metals

Andreas Mortensen, Andreas Rossoll

We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...

Elsevier2009

In situ copper–alumina composites

Andreas Mortensen, Carmen Krüger

We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...

Elsevier2013

Kinetic processes in the high-temperature pressure-infiltration of Al into Al2O3

Andreas Mortensen, Ludger Weber, Marta Fornabaio, Gionata Schneider

We explore the influence (i) of the interaction between aluminium and alumina, and (ii) of sodium impurities present in Bayer alumina, on the pressure infiltration of alumina particle preforms with molten aluminium. At 1000°C or above, although the alumini ...

2020

Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress

Andreas Mortensen, Andreas Rossoll, Benedikt Moser

A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...

2005

Hypervelocity impact testing on stochastic and structured open porosity cast Al-Si cellular structures for space applications

Andreas Mortensen

A hypervelocity (6.7–7.0 km/s) impact testing campaign was conducted using Ø 2 mm, 95% Al projectiles onto A357 aluminium alloy stochastic foams with 4–5 mm typical pore dimensions, or alternatively diamond cubic periodic structures of cast AlSi12 with a 6 ...

2018

Microscopic strength of silicon particles in an aluminium–silicon alloy

Andreas Mortensen, Martin Guillermo Mueller, Goran Zagar, Marta Fornabaio

A microscopic three-point bending test that measures the strength of faceted particles of high aspect ratio is developed and used to probe individual coarsened plate-like silicon particles extracted from the eutectic Al-12.6%Si alloy. Focused ion beam mill ...

Elsevier2016

Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity

Andreas Mortensen, Ludger Weber, Maryam Bahraini Hasani

We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...

Springer US2008

On the preparation and mechanical testing of nano to micron-scale specimens

Andreas Mortensen

Over the past two decades, means allowing to probe experimentally the mechanical behavior of materials specimens only a few micrometers or less in diameter have multiplied, largely owing to the widespread adoption and versatility of focused ion beam (FIB) ...

2025

The effect of size on the plastic deformation of annealed cast aluminium microwires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

Monocrystalline, cast aluminium microwires of diameter (D) below 25 mu m free of micromilling artefacts are annealed under protective atmosphere. Annealing increases the flow stress of all tested microwires, by an amount that is found, in a Haasen plot of ...

2019

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

Andreas Mortensen, Ludger Weber, Reza Tavangar Hamzehkolaei

The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...

2005