Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Séance de cours

Analyse du circuit s-Domaine: Partie 2

Dans cours

MICRO-211: Analog circuits and systems

This course introduces the analysis and design of linear analog circuits based on operational amplifiers. A Laplace early approach is chosen to treat important concepts such as time and frequency responses, convolution, and filter design. The course is com ...

Description

Cette séance de cours couvre des sujets avancés dans l'analyse des circuits s-domaine, y compris les circuits transformés, l'équivalence série et parallèle, les principes de division de tension et de courant, les théorèmes de circuit, l'analyse noeud-tension, l'analyse de courant-mail, et la stabilité des fonctions de transfert de second ordre. L'instructeur explique l'application des théorèmes de proportionnalité et de superposition dans le domaine s, ainsi que les concepts d'entrée zéro et de réponse à l'état zéro. Des exemples sont fournis pour illustrer l'analyse des circuits utilisant des méthodes de tension de noeud et de courant de maille, soulignant l'importance des emplacements de pôle pour déterminer la stabilité du circuit.

Cette vidéo est disponible exclusivement sur Mediaspace pour un public restreint. Veuillez vous connecter à Mediaspace pour y accéder si vous disposez des autorisations nécessaires.

Regarder sur Mediaspace

Enseignant·e

Christian Enz

Christian C. Enz (M84, S'12) received the M.S. and Ph.D. degrees in Electrical Engineering from the EPFL in 1984 and 1989 respectively. From 1984 to 1989 he was research assistant at the EPFL, working in the field of micro-power analog IC design. In 1989 he was one of the founders of Smart Silicon Systems S.A. (S3), where he developed several low-noise and low-power ICs, mainly for high energy physics applications. From 1992 to 1997, he was an Assistant Professor at EPFL, working in the field of low-power analog CMOS and BiCMOS IC design and device modeling. From 1997 to 1999, he was Principal Senior Engineer at Conexant (formerly Rockwell Semiconductor Systems), Newport Beach, CA, where he was responsible for the modeling and characterization of MOS transistors for the design of RF CMOS circuits. In 1999, he joined the Swiss Center for Electronics and Microtechnology (CSEM) where he launched and lead the RF and Analog IC Design group. In 2000, he was promoted Vice President, heading the Microelectronics Department, which became the Integrated and Wireless Systems Division in 2009. He joined the EPFL as full professor in 2013, where he is currently the director of the Institute of Microengineering (IMT) and head of the Integrated Circuits Laboratory (ICLAB).He is lecturing and supervising undergraduate and graduate students in the field of Analog and RF IC Design at EPFL. His technical interests and expertise are in the field of very low-power analog and RF IC design, semiconductor device modeling, and inexact and error tolerant circuits and systems.He has published more than 200 scientific papers and has contributed to numerous conference presentations and advanced engineering courses. Together with E. Vittoz and F. Krummenacher he is one of the developer of the EKV MOS transistor model and the author of the book "Charge-Based MOS Transistor Modeling - The EKV Model for Low-Power and RF IC Design" (Wiley, 2006). He has been member of several technical program committees, including the International Solid-State Circuits Conference (ISSCC) and European Solid-State Circuits Conference (ESSCIRC). He has served as a vice-chair for the 2000 International Symposium on Low Power Electronics and Design (ISLPED), exhibit chair for the 2000 International Symposium on Circuits and Systems (ISCAS) and chair of the technical program committee for the 2006 European Solid-State Circuits Conference (ESSCIRC). Since 2012 he has been elected as member of the IEEE Solid-State Circuits Society (SSCS) Administrative Commmittee (AdCom). He is also Chair of the IEEE SSCS Chapter of Switzerland.

Source officielle

Proximité ontologique

Physique

Électromagnétisme: Circuit électrique

Concepts associés (32)

Network analysis (electrical circuits)

In electrical engineering and electronics, a network is a collection of interconnected components. Network analysis is the process of finding the voltages across, and the currents through, all network components. There are many techniques for calculating these values; however, for the most part, the techniques assume linear components. Except where stated, the methods described in this article are applicable only to linear network analysis.

Circuit RL

Un circuit RL est un circuit électrique contenant une résistance et une bobine ; il est utilisé dans diverses applications, comme filtre passe-bas ou passe-haut, ou dans les convertisseurs de courant continu. Contenant deux composants, il se décline en deux versions différant dans la disposition des composantes (série ou parallèle).

Linear circuit

A linear circuit is an electronic circuit which obeys the superposition principle. This means that the output of the circuit F(x) when a linear combination of signals ax1(t) + bx2(t) is applied to it is equal to the linear combination of the outputs due to the signals x1(t) and x2(t) applied separately: It is called a linear circuit because the output voltage and current of such a circuit are linear functions of its input voltage and current. This kind of linearity is not the same as that of straight-line graphs.

Equivalent circuit

In electrical engineering, an equivalent circuit refers to a theoretical circuit that retains all of the electrical characteristics of a given circuit. Often, an equivalent circuit is sought that simplifies calculation, and more broadly, that is a simplest form of a more complex circuit in order to aid analysis. In its most common form, an equivalent circuit is made up of linear, passive elements. However, more complex equivalent circuits are used that approximate the nonlinear behavior of the original circuit as well.

Méthode des nœuds

thumb|Dans un nœud, la somme des courants entrants égale la somme des courants sortants. La méthode des nœuds est la mise en pratique d'une des lois de Kirchhoff : la loi des nœuds. Il s'agit de poser un système d'équations où les inconnues principales seront des intensités (éventuellement, certaines tensions peuvent être également inconnues). Pour cela, on considère chaque nœud et l'on effectue une sommation - c'est-à-dire que l'on ajoute les intensités des courants arrivant à ce nœud.

Afficher plus

Séances de cours associées (40)

Analyse des circuits électriques

Couvre l'analyse des circuits électriques, en se concentrant sur les résistances et leurs combinaisons.

Transformez les sources : tension en courant

Démontre la transformation des sources de tension en sources de courant et simplifie les circuits pour une analyse efficace.

Thevenin et Norton Théorèmes

Couvre les théorèmes de Thevenin et Norton pour simplifier des circuits complexes en sources équivalentes et résistances internes.

Analyse des circuits avec des sources dépendantes Connectez-vous à Mediaspace pour regarder cette vidéo

Explore l'analyse des circuits avec des sources dépendantes, l'analyse de la tension des nœuds, les circuits équivalents de Thévenin et les fondamentaux d'OPAMP.

Fonctions réseau : analyse et conception Connectez-vous à Mediaspace pour regarder cette vidéo

Explore les fonctions de réseau dans l'analyse de circuit s-domaine, couvrant la stabilité, les pôles, les réponses et la conception.

Afficher plus

Concepts associés (32)

Network analysis (electrical circuits)