Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Séance de cours

Plasticité: Ductilité de traction

Description

Cette séance de cours couvre le concept de plasticité, en se concentrant sur la ductilité de traction et les courbes contrainte-déformation. Il explique comment la fragilisation induite par les radiations affecte les propriétés des matériaux et discute du phénomène de colmatage dans les matériaux soumis à des contraintes.

Cette vidéo est disponible exclusivement sur Mediaspace pour un public restreint. Veuillez vous connecter à Mediaspace pour y accéder si vous disposez des autorisations nécessaires.

Regarder sur Mediaspace

Enseignant·e·s (3)

John Botsis

John (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.

William Curtin

John Martin Kolinski

Dr. Kolinski studied Applied Mathematics (Sc.M.) and Applied Physics (Ph.D.) at Harvard University, completing a PhD under the supervision of L. Mahadevan and Shmuel Rubinstein on the role of air in droplet impact. John did his post-doc at the Hebrew University of Jerusalem in Israel supported by the Fulbright post-doctoral fellowship. At HUJI, he worked on interfacial instabilities in soft matter in the labs of Eran Sharon and Jay Fineberg. John continues his research into interfacial mechanics at EPFL in EMSI, his newly founded laboratory for the study of Engineering Mechanics of Soft Interfaces.

Source officielle

Proximité ontologique

Génie chimique

Science des matériaux: Deformation of materials

Concepts associés (32)

Stress–strain curve

In engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.

Necking (engineering)

In engineering and materials science, necking is a mode of tensile deformation where relatively large amounts of strain localize disproportionately in a small region of the material. The resulting prominent decrease in local cross-sectional area provides the basis for the name "neck". Because the local strains in the neck are large, necking is often closely associated with yielding, a form of plastic deformation associated with ductile materials, often metals or polymers.

Ductilité

La ductilité est la capacité d'un matériau à se déformer plastiquement sans se rompre. La rupture se fait lorsqu'un défaut (fissure ou cavité) devient critique et se propage. Un matériau qui présente une grande déformation plastique à rupture est dit ductile, sinon il est dit fragile. C'est une propriété dite « purement géométrique » : elle ne caractérise qu'un allongement à la rupture (sans unité, ou l'allongement en mètre si la longueur pour l'essai de ductilité est normalisée), indépendamment de l'énergie ou de la contrainte nécessaire à cette rupture.

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Ultimate tensile strength

Ultimate tensile strength (also called UTS, tensile strength, TS, ultimate strength or in notation) is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials the ultimate tensile strength is close to the yield point, whereas in ductile materials the ultimate tensile strength can be higher. The ultimate tensile strength is usually found by performing a tensile test and recording the engineering stress versus strain.

Afficher plus

Séances de cours associées (44)

Sondes flexibles: Mécanique et design

Explore les contraintes critiques, la mécanique de flexion et le calcul des contraintes dans les sondes flexibles.

Essai mécanique : propriétés de traction

Explique les courbes contrainte-déformation et le phénomène de cou dans les essais mécaniques.

Sans titre

Introduction aux modèles de plasticité

Introduit des modèles de matériaux idéalisés, des surfaces de rendement et des concepts d'élastoplasicité, y compris des typologies de défaillance et des réponses cycliques.

Modèles d'approche de la fissure démêlée & Dépendance du mesh

Explore les modèles de fissures sablées, la localisation des contraintes et la dépendance des mailles dans l'analyse structurale, en mettant l'accent sur les hypothèses de simulation des fissures et les relations contrainte-souche.

Afficher plus

Concepts associés (32)

Stress–strain curve

Necking (engineering)

Ductilité

Deformation (engineering)

Ultimate tensile strength

Afficher plus