Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Eric BoillatContact Microcity
Phone: 41 21 69 54456
Enseignement et PhD A co-dirigé les thèses EPFL de Serguei Kolossov, Cédric André, Jamasp Jhabvala, Christoph Van Gestel, Tatiana Polivnikova, Nikola Kalentics Cours Introduction to additive manufacturing ME-413 On présente l'état de l'art dans le domaine des procédés addifitifs (où la pièce est fabriquée par ajout de matière sans utilisation d'outil de forme). Les applications/avantages/limitations des procédés principaux seront discutés ainsi que
Pascal FuaPascal Fua received an engineering degree from Ecole Polytechnique, Paris, in 1984 and the Ph.D. degree in Computer Science from the University of Orsay in 1989. He then worked at SRI International and INRIA Sophia-Antipolis as a Computer Scientist. He joined EPFL in 1996 where he is now a Professor in the School of Computer and Communication Science and heads the Computer Vision Laboratory. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and Augmented Reality. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and machine learning. He has (co)authored over 300 publications in refereed journals and conferences. He is an IEEE Fellow and has been an Associate Editor of IEEE journal Transactions for Pattern Analysis and Machine Intelligence. He often serves as program committee member, area chair, and program chair of major vision conferences and has cofounded three spinoff companies (Pix4D, PlayfulVision, and NeuralConcept).
Michaël UnserExpertise
Image Processing Medical Imaging Biological Imaging Wavelets Splines Multiresolution
Enseignement et PhD Doctorant·es actuel·les Youssef Haouchat, Vincent Patrick Lawrence Guillemet, Bassam El Rawas, Stanislas Ducotterd, Mehrsa Pourya, Zhiyuan Hu A dirigé les thèses EPFL de Stefan Horbelt, Jan Kybic, Maria Arrate Munoz Barrutia, Manuela Feilner, Slavica Jonic, Mathews Jacob, Michael Liebling, Michael Sühling, Muthuvel Arigovindan, François Aguet, Cédric Vonesch, Ildar Khalidov, Sathish Ramani, F
Pierre VandergheynstPierre Vandergheynst received the M.S. degree in physics and the Ph.D. degree in mathematical physics from the Université catholique de Louvain, Louvain-la-Neuve, Belgium, in 1995 and 1998, respectively. From 1998 to 2001, he was a Postdoctoral Researcher with the Signal Processing Laboratory, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland. He was Assistant Professor at EPFL (2002-2007), where he is now a Full Professor of Electrical Engineering and, by courtesy, of Computer and Communication Sciences. As of 2015, Prof. Vandergheynst serves as EPFL’s Vice-Provost for Education. His research focuses on harmonic analysis, sparse approximations and mathematical data processing in general with applications covering signal, image and high dimensional data processing, computer vision, machine learning, data science and graph-based data processing. He was co-Editor-in-Chief of Signal Processing (2002-2006), Associate Editor of the IEEE Transactions on Signal Processing (2007-2011), the flagship journal of the signal processing community and currently serves as Associate Editor of Computer Vision and Image Understanding and SIAM Imaging Sciences. He has been on the Technical Committee of various conferences, serves on the steering committee of the SPARS workshop and was co-General Chairman of the EUSIPCO 2008 conference. Pierre Vandergheynst is the author or co-author of more than 70 journal papers, one monograph and several book chapters. He has received two IEEE best paper awards. Professor Vandergheynst is a laureate of the Apple 2007 ARTS award and of the 2009-2010 De Boelpaepe prize of the Royal Academy of Sciences of Belgium.
Simon Nessim HeneinSimon Henein obtient son diplôme d’ingénieur en microtechnique de l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1996, puis le titre de docteur ès sciences techniques de cette même institution en 2000. En 2001 il publie un livre intitulé « Conception des guidages flexibles » qui devient une référence dans le monde de la conception micromécanique. Ce livre sera traduit en anglais et complété dans un ouvrage collectif intitulé "The art of flexure mechanism design" publié en 2017.Simon Henein s’engage ensuite professionnellement au Centre Suisse d’Electronique et Microtechnique (CSEM) où il conçoit et développe des mécanismes dédiés à des applications robotiques, spatiales, astrophysique, biomédicales et horlogères, ainsi qu’à l’Institut Paul Scherrer où il développe des instruments pour le synchrotron suisse SLS. Depuis le 1er novembre 2012, il est professeur associé en microtechnique à l’EPFL et directeur du Laboratoire de conception micromécanique et horlogère (Instant-Lab). De 2020 à 2021 il effectue un congé de recherche en tant que professeur invité au Centre d'études théâtrales de l'Université de Lausanne (faculté des lettres).
Serge VaudenaySerge Vaudenay entered at the Ecole Normale Supérieure in 1989 with a major in mathematics. He earned his agrégation (secondary teaching degree) in mathematics in 1992, then a PhD in Computer Science at the University of Paris 7 - Denis Diderot in 1995. He subsequently became a senior research fellow at the CNRS, prior to being granted his habilitation à diriger des recherches (a postdoctoral degree authorizing the recipient to supervise doctoral students). In 1999, he was appointed as a Professor at the EPFL, where he created the Security and Cryptography Laboratory.
Mohammad Amin ShokrollahiAmin Shokrollahi has worked on a variety of topics, including coding theory, computational number theory and algebra, and computational/algebraic complexity theory. He is best known for his work on iterative decoding algorithms of graph based codes, an area in which he holds a number of granted and pending patents. He is the co-inventor of Tornado codes, and the inventor of Raptor codes. His codes have been standardized and successfully deployed in practical areas dealing with data transmission over lossy networks.
Prior to joining EPFL, Amin Shokrollahi has held positions as the chief scientist of Digital Fountain, member of the technical staff at Bell Laboratories, senior researcher at the International Computer Science Insitute in Berkeley, and assistant professor at the department of computer science of the university of Bonn. He is a Fellow of the IEEE, and he was awarded the Best Paper Award of the IEEE IT Society in 2002 for his work on iterative decoding of LDPC code, the IEEE Eric Sumner Award in 2007 for the development of Fountain Codes, and the joint Communication Society/Information Theory Society best paper award of 2007 for his paper on Raptor Codes.
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth Cyrille HibertCyrille HIBERT received his diploma in Physics in 1994 and his PhD in 1998 from University of Orleans (FR). He then held a post doctoral position in GREMI laboratory at the University of Orleans in collaboration with Alcatel Vacuum Technology and ST Microelectronics, working in deep anisotropic etching of silicon with an Inductively Coupled Plasma reactor. In May 2000 he joined the EPFL-Center of Micro-Nano-technology where he was in charge of the plasma etching activities. He left EPFL in October 2003 for a sabbatical year to join the CFF group at NMRC (Ireland) now called Tyndall Institute. He worked on developing plasma processing. In October 2004, he came back to EPFL-CMI to be in charge of etching and nanotechnology activities (FIB and future ebeam litho).
