Publications associées à Laser printing

Publications associées (30)

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Femtosecond-laser direct-write photoconductive patterns on tellurite glass

Yves Bellouard, Gözden Torun

We report the formation of arbitrary photoconductive patterns made of tellurium (Te) nanocrystals by exposing a tellurite (TeO2-based) glass to femtosecond laser pulses. During this process, Te/TeO2-glass nanocomposite interfaces with photoconductive prope ...

American Physical Society (APS)2024

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Olivier Bernard, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Flexible Silk-Based Graphene Bioelectronics For Wearable Multimodal Physiological Monitoring

Ata Jedari Golparvar

We introduce a skin-inspired epidermal bioelectronic patch (EBP) with unprecedented integration of graphene on silk with a facile and cost-effective fabrication process, excluding complex ink formulation. We advance the state-of-the-art by directly screen- ...

IEEE2023

All-glass miniature GHz repetition rate femtosecond laser cavity

Yves Bellouard, Saood Ibni Nazir, Antoine Maxime Delgoffe, Sargis Hakobyan

Free-space optics allows for design freedom and control, but miniaturization and manufacturability are limited. Here, we present a method for manufacturing complex miniaturized free-space optical systems that combines contactless femtosecond laser-activate ...

2023

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

Creating and controlling exceptional points of non-Hermitian Hamiltonians via homodyne Lindbladian invariance

Fabrizio Minganti

The exceptional points (EPs) of non-Hermitian Hamiltonians (NHHs) are spectral degeneracies associated with coalescing eigenvalues and eigenvectors, which are associated with remarkable dynamical properties. These EPs can be generated experimentally in ope ...

AMER PHYSICAL SOC2022

Few-femtosecond resolved imaging of laser-driven nanoplasma expansion

Christoph Bostedt, Matthias Bucher

The free expansion of a planar plasma surface is a fundamental non-equilibrium process relevant for various fields but as-yet experimentally still difficult to capture. The significance of the associated spatiotemporal plasma motion ranges from astrophysic ...

IOP Publishing Ltd2022

Low-noise frequency-agile photonic integrated lasers for coherent ranging

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Wenle Weng, Jijun He, Anat Siddharth, Andrey Voloshin, Viacheslav Snigirev, Vladimir Shadymov

Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wave ...

Nature Portfolio2022

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Ultrafast laser interaction with transparent multi-layer SiO2/Si3N4 films

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

We investigate the use of ultrafast lasers exposure to induce localized crystallization and elemental redistribution in amorphous dielectric multi-layers, composed of alternating Si3N4 and SiO2 layers of sub-micrometer thickness. Specifically, we report on ...

2021

Laser Processing Methods for Perovskite Solar Cells and Modules

Mohammad Khaja Nazeeruddin

The perovskite photovoltaic technology is now transitioning from basic research to the pre-industrialization phase. In order to achieve reliable and high-performance commercial perovskite solar modules, high throughput manufacturing technologies must now b ...

WILEY-V C H VERLAG GMBH2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Liouvillian spectral collapse in the Scully-Lamb laser model

Fabrizio Minganti

Phase transitions of thermal systems and the laser threshold were first connected more than forty years ago. Despite the nonequilibrium nature of the laser, the Landau theory of thermal phase transitions, applied directly to the Scully-Lamb laser model (SL ...

AMER PHYSICAL SOC2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Addressable Acoustic Actuation of 3D Printed Soft Robotic Microsystems

Mahmut Selman Sakar, Murat Kaynak, Pietro Luciano Jakobus Dirix

A design, manufacturing, and control methodology is presented for the transduction of ultrasound into frequency-selective actuation of multibody hydrogel mechanical systems. The modular design of compliant mechanisms is compatible with direct laser writing ...

2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Elastic properties of self-organized nanogratings produced by femtosecond laser exposure of fused silica

Yves Bellouard, Pieter Vlugter

Under certain exposure conditions, a femtosecond laser beam focused in the bulk of fused silica leads to the formation of self-organized structures consisting of a series of “nanolayers,” parallel to one another. Remarkably, this laser-induced nanoscale an ...

2020

An effective rule for translating optimal selective laser melting processing parameters from one material to another

Roland Logé, Jamasp Jhabvala, Eric Boillat, Hossein Ghasemi Tabasi, Rita Drissi Daoudi, Toni Ivas

Selective Laser Melting (SLM) or Laser Powder Bed Fusion (L-PBF) is the most studied laser-based additive manufacturing process for metals and alloys. One important issue in SLM is the time-consuming identification of a process window leading to quasi full ...

2020