Ronan BoulicI come from Brittany, France, where I have completed my PhD degree in Computer Science in 1986 from the University of Rennes, France, at the INRIA-IRISA research institute. I also received the Habilitation degree from the University of Grenoble, France, in march 1995. I was hired in 1989 as First Assistant in the VRLAB, I became scientific collaborator, and senior researcher. I'm presently Senior Scientist (MER) and leader of the Immersive Interaction research Group (IIG). I'm co-author of around 150 research papers among which 43 appeared in international peer-reviewed journals. I have contributed to multiple SNF projects and EU projects. Please check iig.epfl.ch for more details.
Brayden Graham MyersEnseignement et PhD Cours Physique générale : mécanique (anglais) PHYS-101(en) Le but du cours de physique générale est de donner à l'étudiant les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsque l'étudiant est capable de prévoir quantitativement les conséquences de ces phénomènes avec des outils théoriques appropriés.
Aude BillardExpertise
Machine LearningRoboticsMechatronicsDynamical SystemsComputational Neuroscience
Enseignement et PhD Doctorant·es actuel·les Hanli Zhang, Maximilian Schmitz, Luyin Hu, Baiyu Peng, Erfan Etesami, Sthithpragya Gupta, Kuanqi Cai A dirigé les thèses EPFL de Eric Sauser, Sylvain Calinon, Micha Hersch, Florent Günter, Biljana Petreska von Ritter-Zahony, Basilio Noris, Elena Gribovskaya, Seyed Mohammad Khansari Zadeh, Seungsu Kim, Ashwini Shukla, Klas Jonas Alfred Kronander, Luka Lukic, Miao Li, Ravin L
Guido HaefeliEnseignement et PhD Doctorant·es actuel·les Federico Ronchetti, Gauri Napoletano A co-dirigé les thèses EPFL de Axel Kuonen, Olivier Göran Girard, Carina Trippl Cours Particle detection PHYS-440 Introduction des différentes interactions des particules dans la matière. Différentes techniques de détection comme scintillateurs, détecteurs à gas, silicium, et détecteurs pour identification de particules.
Kamiar AminianExpertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engineering Fall Prevention in Elderly Motor function in Parkinson disease Physical behavior in chronic pain
Expertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engin
Simon Nessim HeneinSimon Henein obtient son diplôme d’ingénieur en microtechnique de l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1996, puis le titre de docteur ès sciences techniques de cette même institution en 2000. En 2001 il publie un livre intitulé « Conception des guidages flexibles » qui devient une référence dans le monde de la conception micromécanique. Ce livre sera traduit en anglais et complété dans un ouvrage collectif intitulé "The art of flexure mechanism design" publié en 2017.Simon Henein s’engage ensuite professionnellement au Centre Suisse d’Electronique et Microtechnique (CSEM) où il conçoit et développe des mécanismes dédiés à des applications robotiques, spatiales, astrophysique, biomédicales et horlogères, ainsi qu’à l’Institut Paul Scherrer où il développe des instruments pour le synchrotron suisse SLS. Depuis le 1er novembre 2012, il est professeur associé en microtechnique à l’EPFL et directeur du Laboratoire de conception micromécanique et horlogère (Instant-Lab). De 2020 à 2021 il effectue un congé de recherche en tant que professeur invité au Centre d'études théâtrales de l'Université de Lausanne (faculté des lettres).
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Pierre-André FarinePierre-André Farine received the Doctoral and Engineering Degrees in Microtechnology from University of Neuchâtel, Switzerland, respectively in 1984 and 1978, and the Engineering in Microtechnology from ETS Le Locle in 1974.
He was working 17 years for the Swiss watch industries (Swatch Group), including developments for high-tech products, such as pager watches, watches including integrated sensors such as pressure, compass, altimeter and temperature sensors for Tissot. He was also involved in prototypes developments for watches including GPS and cellular GSM phones.
Since 8 years, he is Professor in Electronics and Signal Processing at the Institute of Microtechnology IMT, University of Neuchâtel, Switzerland. Full professor at EPFL since January 1st, 2009, he works in the field of low-power integrated products for portable devices, including microelectronics for wireless telecommunications, UWB and GNSS systems. He is Head of the Electronics and Signal Processing Laboratory ESPLAB of the EPFL IMT-NE. His laboratory works also for video and audio compression algorithms and their implementation in low power integrated circuits.
Sylvain CalinonExpertise
robot learning, human-robot collaboration, optimal control, model-based optimization
I am a Senior Research Scientist at the Idiap Research Institute and a Lecturer at EPFL, with research interests covering robot learning, optimal control, geometrical approaches, and human-robot collaboration. My work focuses on human-centered robotics applications in which the robots can acquire new skills from only few demonstrations and interactions. It requires the development of models that can exploit the st
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Philippe MüllhauptExpertise
Commande non linéaireThéorie de la commandeMécanique généraleSystèmes dynamiquesStatistique
Mission
Offrir une formation technique et scientifique rigoureuse en commande non linéaire, en mécanique classique et en théorie statistique
Travail en cours
Chercheur et enseignant dans les domaines de l'automatique, la statistique, les systèmes dyanmiques et la mécanique classique.
E MSc. et BSc. en génie électrique (EPFL, 1993) DEA en Automatique et Traitement du Signal (Paris VI, 1994) PhD en Automa
Alexandre TerrierEnseignement et PhD Doctorant·es actuel·les Mi-Lane Bouchez, Léa Pistorius A co-dirigé les thèses EPFL de Miguel Gortchacow, Adeliya Latypova, Christoph Anselm Engelhardt, Valérie Malfroy Camine, Yasmine Boulanaache, Pezhman Eghbalishamsabadi Cours Engineering of musculoskeletal system and rehabilitation BIO-687 Numerical methods in biomechanics ME-484 Les étudiants comprennent et appliquent les méthodes numériques (MEF) pour répondre à une question de recherche en biomécan
Shravan Tata RamalingasettyShravan Tata Ramalingasetty obtained his Mechatronics Bachelors in Engineering (B.E) degree from Manipal Institute of Technology, Manipal (2013). During his bachelors he worked on the thesis titled "Human Motion Analysis using Inertial Sensors" in collaboration with the Indian Institute of Technology (IISc), Bangalore. Later he continued working in IISc as Research Assistant with Computational Intelligence Laboratory(CInT) Lab on topics related to human bio-mechanics. Later he joined Technical University of Delft, Delft and graduated with Master of Science (M.Sc) degree in Bio-robotics (2016) after his competition of thesis titled "Cerebellum Inspired Computational Models for Robot Control". He then joined BioRob (2016) for his PhD funded by the Human Brain Project (HBP) to study the underlying mechanisms of locomotion in animals and humans.
Solaiman Shokur2019 - now : Senior Scientist, Translational neuroengineering Laboratory, EPFL(Geneva)
Team leader: CHRONOS project, a multi-center European project that aims at developing the first chronically implanted prosthetic hand for transradial amputee patients with bidirectional communication capabilities. NCCR Robotics: Bi-directional control of supernumerary limbs.2014-2019: Research Coordinator, AASDAP (São Paulo, Brazil) Responsible for both the scientific production and the clinical protocol at the AASDAP neurorehabilitation laboratory.
2013-2014: Postdoctoral associate, Walk again project, Insituto Santos Dumond. (Natal, RN, Brazil)Head of the engineering team in charge of the system integration. 2010-2012: Visiting scientist, Nicolelis Lab (Duke University).
Development and validation of a virtual-reality based brain-machine interface for rhesus monkeys.
2007 – 2010: Teaching assistant, Laboratory of Robotics Systems (EPFL)
Bruno HerbelinSince 10/09 - Scientist Laboratory of cognitive neuroscience Brain & Mind Institute, École Polytechnique Fédérale de Lausanne, Switzerland. 06/12 - 10/19 Deputy Director Center for Neuroprosthetics École Polytechnique Fédérale de Lausanne, Switzerland. 11/05 - 09/09 Assistant Professor Aalborg University Esbjerg Institute of Technology & Copenhagen Institute of Technology, Denmark. 07/01 - 09/05 Research assistant PhD student Virtual Reality Laboratory School of Computer and Communications, École Polytechnique Fédérale de Lausanne, Switzerland.
Olivier SchneiderAprès une thèse en physique des particules à l'Université de Lausanne, soutenue en 1989, Olivier Schneider rejoint le LBL, Lawrence Berkeley Laboratory (Californie), pour travailler sur l'expérience CDF au Tevatron de Fermilab (Illinois), d'abord au bénéfice d'une bourse de chercher débutant du Fonds National Suisse pour la Recherche Scientifique, puis comme post-doc au LBL. Il participe à la construction et à la mise en service du premier détecteur de vertex au silicium fontionnant avec succès auprès d'un collisionneur hadronique, détecteur qui a permis la découverte du sixième quark, appelé "top". Dès 1994, il revient en Europe et participe à l'expérience ALEPH au grand collisionneur électron-positon du CERN (Genève), comme boursier puis comme titulaire d'un poste de chercheur au CERN. Il se spécialise en physique des saveurs lourdes. En 1998, il est nommé professeur associé à l'Université de Lausanne, puis professeur extraordinaire à l'EPFL en 2003, et enfin professeur ordinaire à l'EPFL en 2010. Ayant participé depuis 1997 à la préparation de l'expérience LHCb au collisionneur LHC du CERN, entrée en fonction à fin 2009, il en analyse maintenant les données. Il contribue aussi depuis 2001 à l'exploitation des données enregistrées par l'expérience Belle au laboratoire KEK (Tsukuba, Japon). Ces deux expériences étudient principalement les désintégrations de hadrons contenant un quark b, ainsi que la violation de CP, c'est-à-dire le non-respect de la symétrie entre matière et antimatière.
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Florent CosandierRecherchePublications M. A. Roa et al., ‘Autonomous Precise Assembly of Segmented Mirror Tiles for a Space Telescope’, in 2024 IEEE Aerospace Conference, Big Sky, MT, USA: IEEE, Mar. 2024.F. Cosandier, M. Nijenhuis, J. Huser, and S. Henein, ‘Design of a Flexure-Based Constant-Velocity Joint Optimized for High Axial Loads’, 21st European Space Mechanisms and Tribology Symposium, Lausanne, Switzerland, Sept 2025.P. Flückiger, F. Cosandier, H. Schneegans, and S. Henein, ‘Design of a Flexure-Based Flywheel for
