Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Gabor LaurenczyTitle
External Member of the Hungarian Academy of Sciences
Enseignement et PhD A dirigé les thèses EPFL de Christian Ohlin, Céline Fellay, Weijia Gan, Katerina Stefania Sordakis, Mickael Montandon-Clerc, Cornel Fink, Lu Chen A co-dirigé les thèses EPFL de Séverine Joëlle Moret, Felix Daniel Bobbink
Kamiar AminianExpertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engineering Fall Prevention in Elderly Motor function in Parkinson disease Physical behavior in chronic pain
Expertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engin
Livia Eleonora Bove KadoExpertise
Member of the Scientific Council of the Institute de Physique CNRS since 2018Member of the Transition énergétique et changements globaux, Working Group CNRS, CS INP Representative since 2021Member of the Editorial Board Sapienza University Press (Italy), Senior Editor for the Natural Science Division since 2020Member of the European High-Pressure Research Group Committee since 2018Member of the EPS- Liquid Matter Committee since 2018Chair Liquids and Glasses ILL Panel 2016-2020 Co-editor of Fronte
Arnaud MagrezEducation
PhD., Materials Science, summa cum laude, Université de Nantes, 2002
M.S., Chemistry, Université des Sciences et Technologies de Lille, 1999
Academic positions
Head of the Crystal Growth Facility, EPFL, 2012-present
Research Associate, Laboratoire de Physique de la Matière Complexe, EPFL, 2003-2012
Research Fellow, Peter Grunberg Institute, FZ-Juelich, 2002-2003
Administrative positions at EPFL
Scientific staff member, EPFL Assembly, 2015-present
Scientific staff member, School Council SB, 2014-present
Member of the IPHYS office 2016-present
Member of the ICMP office 2012-2015
Member of the safety committee of ICMP 2010-2015
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Hervé LissekExpertise
Acoustique, audio, electroacoustique, acoustique des salles.Contrôle actif du bruit.Contrôle actif de la réverbération dans les salles.Tests psychoacoustiques.Conception de transducteurs électroacoustiques.Réseaux de transducteurs.Spatialisation.
Expertise
Acoustique, audio, electroacoustique, acoustique des salles.Contrôle actif du bruit.Contrôle actif de la réverbération dans les salles.Tests psychoacoustiques.Conception de transducteurs électroacoustiques.Réseaux de transducteurs.Spatialisation
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Afficher plus