Harald BruneOriginaire de Münich en Allemagne, né en 1961, Harald Brune obtient son diplôme en physique de l'Université Ludwig Maximilians en 1989. Après une thèse en chimie physique à l'Institut Fritz-Haber de la Société Max-Planck à Berlin il obtient son titre de docteur ès sciences en 1992. Dès cela, il rejoint le groupe du Prof. K. Kern à l'Institut de physique expérimentale à l'EPFL. En 1995 il est chercheur invité à Copenhague travaillant en modélisation chez le Prof. J. Nørskov. De retour à l'EPFL, il se voit décerné le prix Latsis EPFL 1996 pour ses études par microscopie à effet tunnel de processus atomiques déterminants la croissance cristalline de couches minces. En 1998 il obtient son habilitation (venia legendi) en Physique et est nommé Maître d'enseignement et de recherche (MER) en nanophysique à l'EPFL. La même année il recoit une offre de Professeur Ordinaire (C4) de l'Université Philipps de Marburg. Début 1999 il réfuse cette offre et accepte un poste de Professeur Extraordinaire à l'EPFL et s'installe au sein de l'Institut de la Physique des Nanostructures. Il est nommé Professeur Ordinaire en 2005. Sa recherche porte sur les propriétés physiques (en particulier le magnétisme et la structure électronique) de nouvelles formes de la matière condensée comme des nanostructures et des couches ultra-minces. Il s'intéresse également à la catalyse hétérogène sur des systèmes inspirés dans leur composition et taille par celle des sites actives dans les enzymes en biologie. Il enseigne la Physique Générale pour ingénieurs, la Physique des matériaux solides pour physiciens, les méthodes expérimentales pour physiciens, ainsi que la Physique des surfaces, interfaces et nanostrcutures à l'école doctorale.
Goutam KuriEnseignement et PhD A co-dirigé les thèses EPFL de Shaileyee Bhattacharya Cours Effects of radiation on materials MSE-600
Mihai Adrian IonescuD'origine et de nationalités roumaine et suisse, Mihai-Adrian Ionescu est né en 1965. Après le doctorat en Physique des Composants à Semiconducteurs de lInstitut National Polytechnique de Grenoble, M. Ionescu a travaillé comme chercheur post-doctoral au LETI-CEA Grenoble, sur la caractérisation des diélectriques low-k pour les technologies submicroniques CMOS. Après une courte période au sein du CNRS, comme chargé de recherche 1ere Classe il a effectué un séjour post-doctoral au Center for Integrated Systems, Stanford University, USA. Actuellement il est Professeur Nanoélectronique à lEcole Polytechnique Fédérale de Lausanne.
Julie Nathalie S GheysenEnseignement et PhD Cours Comportement mécanique des matériaux MSE-234 Ce cours est une introduction au comportement mécanique, à l'élaboration, à la structure et au cycle de vie des grandes classes de matériaux de structure (métaux, polymères, céramiques et composites) Matériaux MSE-171 Une introduction à la science des matériaux appliquée aux matériaux de construction courants, en particulier le béton et les métaux. Description de leur fabrication, leurs comportements mécan
Mohammad Khaja NazeeruddinDr. Md. K. Nazeeruddin received M.Sc. and Ph. D. in inorganic chemistry from Osmania University, Hyderabad, India. He joined as a Lecturer in Deccan College of Engineering and Technology, Osmania University in 1986, and subsequently, moved to Central Salt and Marine Chemicals Research Institute, Bhavnagar, as a Research Associate. He was awarded the Government of Indias fellowship in 1987 for study abroad. After one year postdoctoral stay with Prof. Graetzel at Swiss federal institute of technology Lausanne (E P F L), he joined the same institute as a Senior Scientist. His current research focuses on Dye-sensitized solar cells, Hydrogen production, Light-emitting diodes and Chemical sensors. He has published more than 380 peer-reviewed papers, ten book chapters, and inventor of 40 patents. The high impact of his work has been recognized with invitations to speak at over 80 international conferences, including the MRS Fall (USA, 2006) and Spring 2011 Meetings, GORDON conference (2014), and has been nominated to the OLLA International Scientific Advisory Board. He appeared in the ISI listing of most cited chemists, and has more than 33'500 citations with an h-index of 89. He is teaching "Functional Materials" course at EPFL, and Korea University; directing, and managing several industrial, national, and European Union projects on Hydrogen energy, Photovoltaics (DSC), and Organic Light Emitting Diodes. He was awarded EPFL Excellence prize in 1998 and 2006, Brazilian FAPESP Fellowship in 1999, Japanese Government Science & Technology Agency Fellowship, in 1998, Government of India National Fellowship in 1987-1988. Recently he has been appointed as World Class University (WCU) professor by the Korea University, Jochiwon, Korea (http://dses.korea.ac.kr/eng/sub01_06_2.htm) and Adjunct Professor by the King Abdulaziz University, Jeddah, Saudi Arabia. Nadine BalucEnseignement et PhD A dirigé les thèses EPFL de Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Anna Neus Igual MuñozEnseignement et PhD Doctorant·es actuel·les Quentin Gérard Jean-Charles Ursule A co-dirigé les thèses EPFL de Marian Nida Sagarino Lumongsod-Thompson Cours CCMX Tribology and Surfaces Interactions MSE-667 Characterization of Materials 2025 MSE-716 Corrosion et protection des métaux + TP MSE-311 Ce cours d'introduction à la corrosion veut familiariser l'étudiant avec les mécanismes réactionnels de la corrosion, avec les différentes formes de corrosion et avec
Johannes BertschEnseignement et PhD Doctorant·es actuel·les Sebastian Niedermeyer A co-dirigé les thèses EPFL de Aaron William Colldeweih Cours Effects of radiation on materials MSE-600
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Dragan DamjanovicDragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.
Arnaud MagrezEducation
PhD., Materials Science, summa cum laude, Université de Nantes, 2002
M.S., Chemistry, Université des Sciences et Technologies de Lille, 1999
Academic positions
Head of the Crystal Growth Facility, EPFL, 2012-present
Research Associate, Laboratoire de Physique de la Matière Complexe, EPFL, 2003-2012
Research Fellow, Peter Grunberg Institute, FZ-Juelich, 2002-2003
Administrative positions at EPFL
Scientific staff member, EPFL Assembly, 2015-present
Scientific staff member, School Council SB, 2014-present
Member of the IPHYS office 2016-present
Member of the ICMP office 2012-2015
Member of the safety committee of ICMP 2010-2015
Rizlan Bernier-LatmaniHIGHER EDUCATION
Summer course: Advances in Genome Technology and Bioinformatics Course at the Marine Biology Laboratory in Woods Hole, MA. October 2005.
Ph.D. 2001 Civil and Environmental Engineering, Stanford University, CA
(Advisor, Jim Leckie, Biodegradation of uranyl (UO22 )-complexed citrate and implications for uranyl mobility in the subsurface)
M.S. 1995 Civil and Environmental Engineering, Stanford University, CA
B.S. 1993 Natural Resources with Honors, Cornell University, Ithaca, NY
PROFESSIONAL EMPLOYMENT
2013-present Associate professor with tenure, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2005-2013 Assistant professor tenure track, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2001-2005 Post-Graduate Researcher, Scripps Institution of Oceanography, La Jolla, CA (PI: Brad Tebo)
1995-2001 Graduate Research Assistant, Stanford University (Advisor: Jim Leckie)
RESEARCH INTERESTS
Gemicrobiology, metal-bacteria interactions, biological reduction and oxidation of metals, biological nanoparticle formation; Characterization of microbial communities in terrestrial environments; Using genomic, microscopic and spectroscopic tools to understand metal transformations by microorganisms.
ACADEMIC HONORS
Rotary Foundation University Professor grant, 2004.
Swiss National Science Foundation Post-doctoral Fellowship, 2001.
Leon B. Reynolds Memorial Scholarship in the School of Engineering at Stanford University, 1995-96.
Graduated with Honors from Cornell University, 1993.
BIBLIOMETRY
http://www.researcherid.com/rid/E-4398-2011
ResearcherID: E-4398-2011 Nicolas GrandjeanNicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
Cécile HébertCécile Hébert est née en France, en 1970. Elle a obtenu son diplôme d'ingénieure (option physique) puis son doctorat ("Etude d'un nouveau filtre d'énergie des électrons pour le microscope électronique à transmission") à l'Ecole centrale de Paris. Doctorante dans le laboratoire du professeur Jouffrey, elle a créé un nouveau filtre d'énergie des électrons, pour le microscope électronique à transmission, qui a été breveté par le CNRS.
En tant que post-doctorante dans le laboratoire du professeur Schattschneider, elle a mené à bien une étude marquante sur la simulation des structures fines des seuils de perte d'énergie des électrons en comparaison avec l'expérience. En 2005, elle a été l'une des actrices principales dans l'élaboration du projet européen CHIRALTEM visant à développer dans le microscope électronique à transmission une méthode similaire à la méthode XMCD (X Ray Magnetic Circular Dichroism) connue en spectrométrie d'absorption des rayons X.
Raffaella BuonsantiEnseignement et PhD Doctorant·es actuel·les Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin A dirigé les thèses EPFL de Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Cours Introduction au génie chimique et à l'
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
