Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Thermoplastique

Publications associées (31)

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Thermo-hydro-mechanical behaviour of the Callovo-Oxfordian claystone under thermal changes

Héloïse Manon Fuselier

Underground storage of radioactive waste is consensually recognised as the safest storage solution by European and worldwide countries relying mainly or partially on nuclear energy production. Over twenty years of research led by the French national agency ...

EPFL2024

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

A novel interfacial polymerization assisted phase inversion process for the facile fabrication of ion-selective nanofiltration membranes

Zongyao Zhou

Interfacial polymerization (IP) and non-solvent induced phase inversion (NIPS) are the two most commonly used mainstream technologies to fabricate separation membranes. Taking their advantages, we developed a simple, facile and scalable method to integrate ...

Elsevier Science Sa2023

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Highly Efficient and Air-Stable Inorganic Perovskite Solar Cells Enabled by Polylactic Acid Modification

Yong Ding

Inorganic perovskite solar cells (PSCs) suffer from serious carrier recombination and open-circuit voltage loss because of surface defects and unfavorable energy level alignment. Herein, a polylactic acid (PLA) modification approach to improve the performa ...

WILEY-V C H VERLAG GMBH2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

In situ growth of graphene on both sides of a Cu-Ni alloy electrode for perovskite solar cells with improved stability

Michael Graetzel

The instability of rear electrodes undermines the long-term operational durability of efficient perovskite solar cells. Here, a composite electrode of copper-nickel (Cu-Ni) alloy stabilized by in situ grown bifacial graphene is designed. The alloying makes ...

NATURE PORTFOLIO2022

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

Véronique Michaud, Baris Çaglar, Damiano Salvatori, Robin Samuel Trigueira, Colin Gomez

In Resin Transfer Molding (RTM), resin precursors of thermoset or, more recently, thermoplastic polymers are generally employed, raising issues related to the chemical reaction taking place during and after part processing. In this study, already polymeriz ...

2021

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Nature-inspired Circular-economy Recycling (NaCRe) for Proteins

Simone Giaveri

Since a few decades our planet has been loaded with billion tons of synthetic polymer-based materials, commonly named plastics. The large scale of plastic production, associated with its limited recyclability, are the driving force for the accumulation of ...

EPFL2021

Inferring the flow properties of epithelial tissues from their geometry

Matthieu Wyart, Marko Popovic

Amorphous materials exhibit complex material properties with strongly nonlinear behaviors. Below a yield stress they behave as plastic solids, while they start to yield above a critical stress sigma(c). A key quantity controlling plasticity which is, howev ...

2021

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Composite material

Véronique Michaud, Amaël Maximilien Cohades

In a composite material (6), comprising a fibrous reinforcement (3), and a polymer matrix (14), wherein the polymer matrix (14) comprises two interpenetrating phases, namely a thermoset phase and a continuous thermoplastic phase, wherein the thermoset phas ...

2020

Engineering polymers with improved charge transport properties from bithiophene-containing polyamides

Rosario Scopelliti, Farzaneh Fadaei Tirani, John Christopher Plummer, Holger Frauenrath, Nicolas Candau, Bilal Özen

Polymer semiconductors show unique combinations of mechanical and optoelectronic properties that strongly depend on their microstructure and morphology. Here, we have used a model pi-conjugated bithiophene repeat unit to incorporate optoelectronic function ...

Royal Society of Chemistry2020

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Paul Joseph Dyson, Felix Daniel Bobbink, Antoine Philippe Van Muyden

Combining CO2-chemistry with biomass conversion allows renewable polymeric materials including polycarbonates and polyhydroxyurethanes (PHUs) to be generated. The demand for robust materials with modular properties that can be prepared on an industrial sca ...

Royal Society of Chemistry2019