Concept

Mécanisme à quatre barres

Publications associées (30)

C-shells: Deployable Gridshells with Curved Beams

Mark Pauly, Francis Julian Panetta, Yingying Ren, Quentin Christian Becker, Seiichi Eduardo Suzuki Erazo, Davide Pellis

We introduce a computational pipeline for simulating and designing C-shells, a new class of planar-to-spatial deployable linkage structures. A C-shell is composed of curved flexible beams connected at rotational joints that can be assembled in a stress-fre ...

Association for Computing Machinery (ACM)2023

A low-temperature prismatic slip instability in Mg understood using machine learning potentials

William Curtin, Xin Liu, Binglun Yin

Prismatic slip in magnesium at temperatures T

PERGAMON-ELSEVIER SCIENCE LTD2023

Dynamic Modeling of an Origami Prismatic Joint

Jamie Paik, Jian-Lin Huang, Mustafa Mete

Dynamic modeling of folding joints is critical for predicting dynamic behavior, optimizing design parameters, and developing control strategies for origami robots and machines. Although kinematics of the folded joints exists, little research describes thei ...

IEEE2023

Rectilinear translation four-bar flexure mechanism based on four Remote Center Compliance pivots

Simon Nessim Henein, Charles Baur, Hubert Pierre-Marie Benoît Schneegans, Loïc Benoît Tissot-Daguette, Quentin Gubler

This paper presents a novel planar four-bar linkage compliant mechanism (called 4-RCC) based on four flexure-based Remote Center of Compliance (RCC) pivots. With particular configurations and dimensions, the beam shortening of the RCC pivots can compensate ...

euspen2022

From kirigami to hydrogels: a tutorial on designing conformally transformable surfaces

Yingying Ren, Tian Chen

Elastic surfaces that morph between multiple geometrical configurations are of significant engineering value, with applications ranging from the deployment of space-based PV arrays, the erection of temporary shelters, and the realization of flexible displa ...

2023

Lattice-and-Plate Model: Mechanics Modeling of Physical Origami Robots

Jamie Paik, Hongying Zhang

Origami robots are characterized by their compact design, quasi-two-dimensional manufacturing process, and folding joint-based transmission kinematics. The physical requirements in terms of payload, range of motion, and embedding core robotic components ha ...

MARY ANN LIEBERT, INC2022

Flexure pivot based system

Simon Nessim Henein, Loïc Benoît Tissot-Daguette, Michal Stanislaw Smreczak

Flexure pivot based system (1) being one of: a force sensor, a force limiting device arranged to exert a predetermined threshold force, a torque limiting device arranged to exert a predetermined threshold torque, a programmable mechanical memory, or an acc ...

2022

Method of encoding a 3d shape into a 2d surface

Mark Pauly, Francis Julian Panetta, Mina Konakovic Lukovic

The present invention concerns a method for encoding a given 3D shape into a target 2D linkage. The method comprises: (a) providing an initial 2D surface; and (b) defining on the initial 2D surface an auxetic pattern of geometric elements planarly linked b ...

2020

Statically and dynamically balanced oscillator based on Watt's linkage

Simon Nessim Henein, Ilan Vardi, Hubert Pierre-Marie Benoît Schneegans

We present a new mechanical oscillator architecture that can be made insensitive to linear and angular accelerations while keeping constant oscillation frequency. The oscillator has the kinematics of a Watt linkage, so we call it a Watt oscillator. In orde ...

EUSPEN2020

Sensor system

Simon Nessim Henein, Charles Baur, Thomas Jean Julien Fussinger, Hubert Pierre-Marie Benoît Schneegans, Lisa Anaïs Jeanne Bonnefoy

Sensor system (1) comprising a frame (306) supporting a force-sensing tip (310) arranged to generate a signal based upon a force applied by said force-sensing tip (310) to a material to be tested,characterised in that said system (1) further comprises:- an ...

2020

Rigid foldability and mountain-valley crease assignments of square-twist origami pattern

Huijuan Feng

Rigid foldability allows an origami pattern to fold about crease lines without twisting or stretching component panels. It enables folding of rigid materials, facilitating the design of foldable structures. Recent study shows that rigid foldability is affe ...

PERGAMON-ELSEVIER SCIENCE LTD2020

A plane linkage and its tessellation for deployable structure

Chen Yan, Huijuan Feng

Deployable structures are widely used in space applications such as solar arrays and antennas. Recently, inspired by origami, more deployable structures have been developed. This paper outlined a novel design scheme for deployable structures by taking a pl ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Identification of Mechanism Stiffness of Autoeliminating Clearance for Auxiliary Bearing

In this article, a method for identification of equivalent stiffness was proposed based on a genetic algorithm by studying the stiffness characteristics of autoeliminating clearance auxiliary bearing devices (ACABDs) in static condition. Subsequently, the ...

2019

Design of Low-Profile Compliant Transmission Mechanisms

Jamie Paik, Zhenishbek Zhakypov, Frédéric Henri Vaskin Giraud

Robotic origami design allows creating meso-scale robotic systems and mechanisms not limited by degrees of freedom, miniaturization and assembly downsides of conventional transmission mechanisms. However, unlike the traditional rigid approaches, robotic or ...

IEEE2019

Improved pivot-slide model of the motion of a curling rock

Gaëtan Emmanuel Mancini

The pivot-slide model (Shegelski and Lozowski) successfully predicts the slide and curl distances of a curling rock. However, in this model, there is no dependence of the curl distance on the initial velocity, because the ratio between the pivot to sliding ...

CANADIAN SCIENCE PUBLISHING2019

Planar pop-up actuator device with embedded electro-magnetic actuation

Jamie Paik, Amir Firouzeh, Marco Salerno

A planar actuator device, including a base plate including a first, second, and third pair of planar coils, each pair of planar coils having an inner coil and an outer coil, each pair of planar coils arranged along a first, second, and third linear motion ...

2018

A planar pop-up actuator device with embedded electro-magnetic actuation

Jamie Paik, Stefano Mintchev, Amir Firouzeh, Marco Salerno

2018

Out-of-plane instability of thin reinforced concrete walls under seismic loading

Angelica Rosso

Out of plane instability of reinforced concrete walls is a failure mechanism observed rather recently following the earthquakes in Chile (2010) and New Zealand (2011). Global out of plane instability is a phenomenon that may occur in thin walls, subjected ...

EPFL2018

The Design of A New Rotary Hexapod with A Single Active Degree of Freedom

Jamie Paik, Alexey Fomin

This study provides a novel approach for designing a rotary hexapod with a single actuator and definable motion of a platform. Hexapod is a parallel structure mechanism with six legs and six degrees of freedom (DoF) of an end-effector. It is not an underac ...

2017

Calculation of the General Number of Imposed Constraints of Kinematic Chains

Jamie Paik, Alexey Fomin

The study provides derivation and application of novel formula for the calculation of general imposed constraints for kinematic chains (including mechanisms and zero-degrees-of-freedom Assur groups) depending on the types of kinematic pairs and numbers of ...

Elsevier2017