Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Yves MartinEnseignement et PhD A co-dirigé les thèses EPFL de Francesco Piras, Jonathan Rossel Cours Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasma applications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical and experimental background to the various topics.
Olivier SauterEnseignement et PhD Doctorant·es actuel·les Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne A dirigé les thèses EPFL de Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders,
Stefano CodaEnseignement et PhD Doctorant·es actuel·les Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino A dirigé les thèses EPFL de Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Duccio TestaExpertise
Physique des plasmas pour la fusion nucléaireDéveloppement de modèles mathématiques et numériques pour l'analyse statistique des fluctuations dans des systèmes physiques complexesDéveloppement d'instrumentation de mesure avec procédés de microtechniqueArchéologie de l'époque romaine et préromaine
Expertise
Physique des plasmas pour la fusion nucléaireDéveloppement de modèles mathématiques et numériques pour l'analyse statistique des fluctuations dans des systèmes physiques complexesDéveloppement d
Daniel Alexander Florez OrregoEnseignement et PhD Doctorant·es actuel·les Vibhu Baibhav Cours Advanced energetics ME-451 Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Emad OveisiDr Emad Oveisi is a senior scientist at the Interdisciplinary Centre for Electron Microscopy (CIME), EPFL.
Emad received a BSc in Metallurgy and Materials Engineering (2005) and an MSc in Materials Science (2008) both from the University of Tehran (Iran). He graduated with a PhD in Materials Science and Engineering at EPFL in 2014 for a thesis on the "Three-Dimensional STEM Imaging of Dislocations" under the direction of Prof. Cécile Hébert. The PhD thesis at the Electron Spectrometry and Microscopy Laboratory (LSME), served as an introduction to many of the advanced microscopy techniques that have proven to be a platform for his research career. A post-doctoral research at the centre for electron microscopy gave him the opportunity to peruse a cutting-edge research on one of the most modern aberration-corrected transmission electron microscopes.Since the inauguration of the Energypolis campus of EPFL in Sion, he has been the manager and reference scientist of the electron microscopy platform of EPFL-Valais, working with 9 research groups and more than 200 researchers. In addition to this core responsibility, he provides advanced microscopy consulting and service to EPFL scientists and assist their research to the highest level possible.
Emad Oveisi’s research focuses on the application and development of novel electron microscopy techniques, with emphasis on 3D imaging of crystal defects, as well as the precision measurement of materials properties using aberration-corrected S/TEM. In 2018, he received the prestigious Microscopy Innovation Award for inventing “Single-shot three-dimensional electron imaging”, a novel technique that enables 3D imaging of in situ dynamics.
In 2016 Emad was elected as an interim representative for the scientific staff ("corps intermédiaire") to the Council of the Institute of Chemistry (ISIC). Since 2019, he is a member of EPFL Teachers’ Council (CCE) and has been elected as one of its four bureau members. This role allows him to be exposed to new ideas and pedagogical challenges, as well being involved in discussions with the Vice Presidency of Education (VPE) and other teaching organisations for defining teaching strategies at the EPFL.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Herbert SheaEnseignement et PhD Doctorant·es actuel·les Myoung Ju Kim, Xintong Tong, Huapeng Zhang, Rohit Kadungamparambil John, Yichi Luo, Lucas Aurélien Jourdan, Ayana Mizutani, Donghyun Kim A dirigé les thèses EPFL de Michael Bodendorfer, Renato Krpoun, Samuel Rosset, Muhamed Niklaus, Kaustav Ghose, Samin Akbari, Vinu Lalgudi Venkatraman, Luc Maffli, Simon Dandavino, Tobias Bandi, Subha Chakraborty, Pietro Romano, Alexandre Poulin, Marianna Fighera, Nadine Besse, Alexis Pierre Henri Marette, Reto Wiesendanger, Fr
Jan Van HerleNé à Anvers, Belgique, 1966. En Suisse depuis 1983. Naturalisé Suisse en 2004 par persuasion de la culture suisse démocratique et participative 'bottom-up'. Pas de double nationalité. Conseiller communal durant 2 mandats de 5 ans de 2006 à 2016.
1987 : Chimiste de l'Université de Bâle (CH).
1988 : Post-grade informatique de l'Ecole d'Ingénieurs de Bâle.
1989 : Stage industriel chez ABB à Baden (CH).
1990-1993 : Thesè EPFL
1994-1995 : Postdoc au Japon (Tokyo).
1996-2000 : Chercheur à l'EPFL, Dpt. Chimie, responsable de groupe.
1998-2000 : Master en Energy Technology, EPFL.
2000 : Cofondateur de HTceramix SA (EPFL spin-off), à Yverdon (actuellement 12 employés). La maison mère SOLIDpower en Italie, qui a acheté notre technologie en 2007, emploie 250 personnes et a levé 70 MCHF.
2000-2012 : 1er Assistant et chargé de cours en STI-IGM. Promu à MER en 2008.
2013-présent: MER responsable d'unité.
Output : 135 publications, 120 papiers de conférence, 15 théses de doctorat, 4 thèses en cours, 37 thèses de master. Facteur h-42, >5000 citations.
Fonds levés jusqu'à présent >19 MCHF.
5 langues couramment (néerlandais, français, allemand (y.c. suisse-allemand), anglais, espagnol).
