Publications related to Comparison and combination of reduced order modelling techniques in 3D parametrized heat transfer problems

Related publications (30)

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Radiation-tolerant Multichannel Dew Point Temperature Monitoring System for High Energy Physics Applications

Amar Kapic

The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...

EPFL2023

Multiscale enhancement of refrigerant falling film boiling by combining commercially enhanced tubes with nanostructures

John Richard Thome

Multiscale surface structures offer the opportunity to combine the heat transfer enhancement provided by microscale structures with the dryout benefits provided by some nanostructures, which is particularly attractive for falling film evaporators, who have ...

Pergamon-Elsevier Science Ltd2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

Mohammad Andayesh, François Maréchal, Daniel Alexander Florez Orrego

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Validation of human thermo-physiology models for personalized predictions of thermal responses

Dolaana Khovalyg, Mohamad Rida

Current thermal comfort models used in practice do not consider physiological and psychological differences of people. With this respect, human thermo-physiology models (HTPM) are useful tools to assess human thermal comfort at local and overall levels of ...

Curran Associates, Inc2023

Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation

Remco Franciscus Peter van Erp

Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...

EPFL2022

Conductive Heat Transfer in Partially Saturated Gas Diffusion Layers with Evaporative Cooling

Sophia Haussener, Mirco Magnini

Heat transport is an important, though often neglected function of gas diffusion layers (GDLs) of polymer electrolyte membrane fuel cells. Thermal conductivity is a key property, especially in partially water saturated GDLs and when the phase change of wat ...

2022

Multi-configuration evaluation of a megajoule-scale high-temperature latent thermal test-bed

Sophia Haussener, Clemens Gregor Suter, Selmar Rudolf Binder, Nithin Mallya

Thermal energy storage via latent heat provides an energy dense solution and, during discharge, a hot stream at a well-defined temperature. Utilizing metal phase change materials (PCMs) and high-temperature operation might enable fast (dis)charging and app ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Multi-Scale Study of High-Temperature Latent Heat Storage With Metallic Phase Change Materials

Nithin Mallya

Energy storage is a central issue in the green economy with half the global end energy usage being heat. Latent heat thermal energy storage (LHTES) provides an energy dense heat storage solution with a well-defined discharge temperature. Utilizing low-cost ...

EPFL2022

Convective regimes induced by surface cooling and topography in stratified waterbodies

Damien Bouffard, Hugo Nicolás Ulloa Sánchez, Tomy Doda

Gravitational convection plays a significant role in the ventilation, heat and mass distribution of aquatic systems. This study investigates thermally driven convection resulting from heat loss at the air-water interface during cooling periods in freshwate ...

Iahr-Int Assoc Hydro-Environment Engineering Research2022

Design and management of three-dimensional multi-processor systems-on-chip with integrated flow cell arrays

Halima Najibi

Three-Dimensional Multi-Processor Systems-on-Chip (3D MPSoCs) are promising solutions for highly intensive Artificial Intelligence (AI) and Big Data applications. They combine remarkably dense computation capabilities and massive communication bandwidths. ...

EPFL2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Thermal management of components for high energy physics experiments and space applications

Timothée Robert Sophus Frei

High-energy physics (HEP) experiments and space missions share a common challenge: thermal management in harsh environments. The severe constraints in both fields make cooling of electronic components a major design concern. This thesis aims to develop hig ...

EPFL2021

Heat Transfer Enhancement in a Double Sequential Impingement Channel

Peter Ott, Michele Gaffuri

Sequential impingement channels can reduce the adverse effect of crossflow in narrow impingement channels, as well as increase the cooling efficiency. In this work, sequential impingement channels are experimentally investigated using the transient liquid ...

2021

Operational Map And Thermal Performance Of A Thermosyphon Cooling System For Compact Servers

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

This paper advances the state-of-the-art in novel passive two-phase systems for more efficient cooling of datacenters and telecom central offices compared to the traditional air-based cooling solutions (e.g. aisle-based containment systems). The proposed p ...

AMER SOC MECHANICAL ENGINEERS2021

Experimental investigation and analysis of sequential jet impingement concepts for enhanced turbine cooling

Michele Gaffuri

With the future decarbonization of the electricity production, gas turbines will be an important tool for the stabilization of the electricity grid by meeting the peak of energy demand using zero-carbon fuels like synthetic gas and hydrogen. The combustion ...

EPFL2021

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...

EPFL2021

Hybrid Two-Phase Cooling Technology For Next-Generation Servers: Thermal Performance Analysis

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

This paper advances the work presented at ITHERM 2020 where a novel passive two-phase technology was introduced for more efficient cooling of datacenters compared to air-based cooling solutions (e.g. In-Room, In-Row, etc.). The proposed hybrid two-phase co ...

IEEE2021