Publications related to Strain measurement of hydraulic turbine using distributed optical fiber sensor: a preliminary study

Related publications (28)

On the prediction of the induced damage by the start-up sequence of Francis turbines: On operational resilience framework

Mario Paolone, Christophe Nicolet, Elena Vagnoni, Martin Seydoux

The number of transient operations in hydraulic machinery connected to power grid, notably start-ups and shut-downs, has observed a substantial increase in recent decades, primarily driven by the global shift toward intermittent renewable energy sources. S ...

Pergamon-Elsevier Science Ltd2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Twenty years of irrigation acclimation is driven by denser canopies and not by plasticity in twig- and needle-level hydraulics in a Pinus sylvestris forest

Charlotte Grossiord, Christoph Bachofen, Eugénie Isabelle Mas, Alice Jacqueline Frédérique Gauthey, Alex Tunas Corzon

Climate change is predicted to increase atmospheric vapor pressure deficit, exacerbating soil drought, and thus enhancing tree evaporative demand and mortality. Yet, few studies have addressed the longer-term drought acclimation strategy of trees, particul ...

Oxford Univ Press2024

Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization

Mario Paolone, Elena Vagnoni, Aldo Leonardo Alerci

Hydropower plants play a crucial role in the power system facing ambitious renewable energy targets. Due to their inherent controllability, they are well suited to provide flexibility to the grid. However, an increased flexibility provision leads to a prol ...

Pergamon-Elsevier Science Ltd2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Enhancing Flood Resilience: Sediment Management in Le Bez Torrent

Giovanni De Cesare, Azin Amini, Romain Nathan Hippolyte Merlin Van Mol

In the canton of Bern, Switzerland, the “Le Bez” torrent is known for its flash floods, causing sediment and wood debris buildup in Villeret village settled on the alluvial fan. To mitigate this issue, a sediment/wood trap system is being implemented upstr ...

Swiss Academy of Sciences (SCNAT)2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Fiber pumps for wearable fluidic systems

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

Incorporating pressurized fluidic circuits into textiles can enable muscular support, thermoregulation, and haptic feedback in a convenient wearable form factor. However, conventional rigid pumps, with their associated noise and vibration, are unsuitable f ...

American Association for the Advancement of Science2023

Research data supporting 'Fiber pumps for wearable fluidic systems'

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

The dataset supporting 'Fiber pumps for wearable fluidic systems', published in Science in March 2023. In this work, we present a fluidic pump in the form of a flexible and stretchable tube. These tubes - or 'fiber pumps' - can generate significant fluidic ...

2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Nikolay Bykovskiy

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

CFD simulations of hydraulic short-circuits in junctions, application to the Grand’Maison power plant

François Avellan, Cécile Münch-Alligné

In the framework of the XFLEX HYDRO H2020 European Project, the pumped-storage power plant of Grand'Maison (France), owned by Electricité De France, focuses on the implementation of the hydraulic short-circuit (HSC) operating mode. This mode increases the ...

2022

Optimal CAM Computation of Kaplan Turbines Accounting for Wear and Tear Originated by Frequency Control

Mario Paolone, Sidi-Rachid Cherkaoui, Elena Vagnoni, Francesco Gerini

Nowadays, the importance of providing frequency stability to power systems with hydropower units is significantly increasing due to the growing proportion of volatile renewable energy sources. However, the provision of such services, as frequency containme ...

IEEE2021

Third correction of the Rhône River in Switzerland: physical and numerical modelling of the “Martigny bend” priority measure

Giovanni De Cesare, Azin Amini, Stéphanie Joëlle André, Irene Almeida Samora, Pierre Bourqui, Jean-Noël Saugy

The Rhône River, second largest in Switzerland, has already been corrected twice (1863-1893; 1930-1960) to ensure safety and economic development in the Rhône valley. However, in October 2000, the highest flood of the century occurred showing the limitatio ...

International Research Society INTERPRAEVENT2021

Experimental and Numerical Study on Scour-Protection Methods in a Stilling Basin: Case Study of Chancy-Pougny Dam

Anton Schleiss, Giovanni De Cesare, Erik Bollaert, Sabine Chamoun, Davide Wüthrich

Chancy-Pougny is a run-of-river dam on the Swiss–French border constructed in the early 1920s. Since its commissioning, the operation of the four spillway gates has been responsible for a progressive erosion of the stilling basin. The future scour potentia ...

2021

Numerical investigation on the volute cutwater for pumps running in turbine mode

Elena Vagnoni, Alessandro Morabito

The hydropower sector has recently raised the interest in pump as turbine (PaT) that can be a valid trade-off between capital cost and performance in micro-scale installations. Nevertheless, the modest efficiency of PaTs often restricts their exploitation. ...

Pergamon-Elsevier Science Ltd2021

Evaluation of a Dynamic Transfer Matrix for a Hydraulic Turbine

François Avellan, Andres Müller, Keita Yamamoto

It is well known that hydraulic machines experience various types of flow instabilities causing a negative influence on the system under off-design operations. The transfer matrix method correlating the flow properties in upstream and downstream of hydraul ...

2020

Suppressing tip-leakage vortex cavitation by overhanging grooves

Mohamed Farhat

In the present paper, a new control method for tip-leakage vortex (TLV) cavitation is proposed. This method, which combines the effects of grooves and winglets, is made of overhanging grooves (OHGs) fitted at the tip of a hydrofoil. Experimental and numeri ...

SPRINGER2020