Conductive framework of inverse opal structure for sulfur cathode in lithium-sulfur batteries

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Battery health prediction is significant while challenging for intelligent battery management. This article proposes a general framework for both short-term and long-term predictions of battery health under unseen dynamic loading and temperature conditions ...

Layered cathodes are among the most promising cathodes for high-energy-density Li-ion batteries, yet hindered by the structural degradation from both bulk strain and surface oxygen loss at high voltage (above 4.5 V). Herein, we report a pre-fatigue trainin ...

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

In this study, a flexible, free-standing Fe -doped CoP nanoarrays electrode for superior lithium -ion storage has been successfully fabricated. The electrode combines the advantages of a Fe -doping and a flexible carbon cloth (CC) support, resulting in a h ...

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic li ...

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

Ordered two-dimensional (2D) materials hosting Å-scale pores are highly promising for enabling challenging separation, thanks to well-defined pore geometry resulting in tight confinement of ions when hosted inside the pore. In addition, the 2D nature of th ...

The preparation of atom-thick porous lattice hosting & Aring;-scale pores is attractive to achieve a large ion-ion selectivity in combination with a large ion flux. Graphene film is an ideal selective layer for this if high-precision pores can be incorpora ...

Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free ...

A user’s benefit from the energy stored in a battery over its lifetime depends on the time-varying characteristics of the battery, which are in turn affected by the chosen usage behavior. Both the capacity shrinkage and the number of lifetime cycles are st ...

MOFs are a class of porous crystalline materials whose unique properties have led to applicability in several fields ranging from gas adsorption to drug delivery. Despite their high potential, MOFs are usually found as fine powders, a property that can lim ...

The vast amount of computational studies on electrical conduction in solid-state electrolytes is not mirrored by comparable efforts addressing thermal conduction, which has been scarcely investigated despite its relevance to thermal management and (over)he ...

The current restrictions on the registration of combustion engines in different countries and the harmful impacts of fossil fuels on the environment and human health have motivated decision-makers to use batteries and/or fuel cells as alternatives for comb ...

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lith ...

Predictive health assessment is of vital importance for smarter battery management to ensure optimal and safe operations and thus make the most use of battery life. This paper proposes a general framework for battery aging prognostics in order to provide t ...

The sustainable development of rechargeable aqueous zinc-ion batteries (RZIBs) is severely limited by the uncontrolled zinc dendritic growth and side reactions on the anode. Herein, a lignocellulose nanofiber (LCNF) separator from waste palm with dual-func ...

We developed and implemented a multi-target multi-fidelity workflow to explore the chemical space of antiperovskite materials with general formula X(3)BA (X=Li, Na, Mg) and Pm-3m space group, searching for stable high-performance solid state electrolytes f ...

Conductive framework of inverse opal structure for sulfur cathode in lithium-sulfur batteries

Chat with Graph Search

Health Prediction for Lithium-Ion Batteries Under Unseen Working Conditions

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Crystal, defect, and morphology engineering of porous two-dimensional materials for ionic separation

Electrochemical-repaired porous graphene membranes for precise ion-ion separation

Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation

Optimal Depth of Discharge for Electric Batteries with Robust Capacity-Shrinkage Estimator

Densification and shaping of pure Cu-BTC powders using a solid-state chemical transformation

Thermal conductivity of Li 3 PS 4 solid electrolytes with ab initio accuracy

Electrochemical devices and computer science: water/thermal management of proton exchange membrane fuel cells and electrolyzers in different scales

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Fast and Durable Lithium Storage Enabled by Tuning Entropy in Wadsley-Roth Phase Titanium Niobium Oxides

Predictive health assessment for lithium-ion batteries with probabilistic degradation prediction and accelerating aging detection

A water-gating and zinc-sieving lignocellulose nanofiber separator for dendrite-free rechargeable aqueous zinc ion battery

Accelerated Workflow for Antiperovskite-based Solid State Electrolytes