Publications related to Semiconductor-based narrow-line and high-brilliance 193-nm laser system for industrial applications

Related publications (29)

Single-Mode Laser in the Telecom Range by Deterministic Amplification of the Topological Interface Mode

Photonic integrated circuits are paving the way for novel on-chip functionalities with diverse applications in communication, computing, and beyond. The integration of on-chip light sources, especially single-mode lasers, is crucial for advancing those pho ...

Amer Chemical Soc2024

Laser-based manufacturing of freeform glass micro-optics through topological transformation

Samuel Youcef Benketaf

Glass has been the material of choice for making optical elements, in large part due to its intrinsic properties: a temperature-dependent viscosity, which enables shaping the material into a broad variety of functional and artistic glassware. Silica glass ...

EPFL2024

Nonlinear optical diode effect in a magnetic Weyl semimetal

Philip Johannes Walter Moll, Chunyu Guo

Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically co ...

Nature Portfolio2024

Wavelength-stabilized figure-of-9 thulium-doped all-fiber laser emitting 560 fs pulses

Camille Sophie Brès, Moritz Bartnick, Gayathri Bharathan

We demonstrate a figure-of-9 all-fiber thulium-doped laser (TDFL) that generates 560 fs long pulses at 1948 nm wavelength. In order to achieve self-starting passive mode-locking, we utilize an in-fiber Faraday rotator to induce a nonreciprocal phase shift. ...

Iop Publishing Ltd2024

Femtosecond-laser direct-write photoconductive patterns on tellurite glass

Yves Bellouard, Gözden Torun

We report the formation of arbitrary photoconductive patterns made of tellurium (Te) nanocrystals by exposing a tellurite (TeO2-based) glass to femtosecond laser pulses. During this process, Te/TeO2-glass nanocomposite interfaces with photoconductive prope ...

American Physical Society (APS)2024

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Exciton migration in two-dimensional materials

Giovanni Consalvo Cistaro

Excitons play an essential role in the optical response of two-dimensional materials. These are bound states showing up in the band gaps of many-body systems and are conceived as quasiparticles formed by an electron and a hole. By performing real-time simu ...

Nature Portfolio2024

On the interaction of femtosecond laser pulses with layered dielectric materials

Ruben Ricca

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

Ultrafast tunable lasers using lithium niobate integrated photonics

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Anat Siddharth, Guanhao Huang, Mikhail Churaev, Viacheslav Snigirev

Early works(1) and recent advances in thin-film lithium niobate (LiNbO3) on insulator have enabled low-loss photonic integrated circuits(2,3), modulators with improved half-wave voltage(4,5), electro-optic frequency combs(6) and on-chip electro-optic devic ...

NATURE PORTFOLIO2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

Cavitation induced by pulsed and continuous-wave fiber lasers in confinement

Christophe Moser, Jan Krizek

Bubbles generated with lasers in liquids under confinement have been investigated for their potential use as the driving mechanism for liquid micro-jets in various microfluidic devices, such as needle-free jet injectors. Here, we report on the study of bub ...

ELSEVIER SCIENCE INC2023

Laser-guided lightning using kHz filamentation at 1030 nm

Farhad Rachidi-Haeri, Marcos Rubinstein, Antonio Sunjerga, Amirhossein Mostajabi

Controlling lightning is a long-time dream of mankind. Along with the rapid evolution of laser technologies, the idea to develop lightning protection based on filamentation of high-power ultrashort-pulse lasers emerged in the 1990s [1]. The goal of the Las ...

2023

Method for operating a frequency agile tunable self-injection locking laser system and self-injection locking laser system

Tobias Kippenberg, Johann Emmeram Riemensberger, Anat Siddharth, Grigorii Likhachev

The invention relates to a Method for operating a frequency agile tunable self-injection locking laser system being formed by a laser device coupled to at least one optical resonator, wherein a diode current of a laser diode of the laser device is controll ...

2023

All-glass miniature GHz repetition rate femtosecond laser cavity

Yves Bellouard, Saood Ibni Nazir, Antoine Maxime Delgoffe, Sargis Hakobyan

Free-space optics allows for design freedom and control, but miniaturization and manufacturability are limited. Here, we present a method for manufacturing complex miniaturized free-space optical systems that combines contactless femtosecond laser-activate ...

2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Olivier Bernard, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

Photonic assembly tunable via the pockels effect and method for use in frequency-modulated lidar

Tobias Kippenberg, Johann Emmeram Riemensberger, Viacheslav Snigirev, Grigorii Likhachev

A photonic assembly, a laser setup comprising said photonic assembly and a method for performing frequency-modulated continuous-wave light detection and ranging using said laser setup are disclosed. The photonic assembly (1) comprises an active photonic ch ...

2023

The competing effects of wave amplitude and collisions on multi-ion species suppression of stimulated Brillouin scattering in inertial confinement fusion Hohlraums

Stephan Brunner

Reduction in stimulated Brillouin scattering (SBS) from National Ignition Facility Hohlraums has been predicted through the use of multi-ion species materials on Hohlraum walls. This approach to controlling SBS is based upon introducing a lighter ion speci ...

2023