Publications related to Détection vibratoire de l'érosion de cavitation des turbines Francis

Related publications (27)

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024

On the prediction of the induced damage by the start-up sequence of Francis turbines: On operational resilience framework

Mario Paolone, Christophe Nicolet, Elena Vagnoni, Martin Seydoux

The number of transient operations in hydraulic machinery connected to power grid, notably start-ups and shut-downs, has observed a substantial increase in recent decades, primarily driven by the global shift toward intermittent renewable energy sources. S ...

Pergamon-Elsevier Science Ltd2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...

IOPscience2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Vapor compression and energy dissipation in a collapsing laser-induced bubble

Mohamed Farhat, Danail Obreschkow, Davide Bernardo Preso, Armand Baptiste Sieber

The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the ...

Aip Publishing2024

Towards an improved understanding of wind turbine wakes in complex terrain

Arslan Salim Dar

In this thesis, we explored the effect of certain terrain-induced flow phenomena on the development of wind turbines sited in complex terrain. A combined experimental and analytical approach is used to study wind turbine wakes in different types of complex ...

EPFL2024

Magnetism of Single Surface Adsorbed Atoms Studied with Radio-Frequency STM

Clément Marie Soulard

This thesis investigates the magnetic properties of single atoms and molecules adsorbed on thin magnesium oxide decoupling layers, grown on a silver single crystal. To address these systems experimentally, we use a low temperature scanning tunneling micros ...

EPFL2024

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Mechanistic 2D flow-erosion modelling of vegetated river banks

Giovanni De Cesare, Paolo Perona

We present a simple, vertically-explicit 2D model of river bank erosion that also takes the effect of sediment stabilization by plant roots into account. The model is solved in quasi-analytical form for an exemplary non-stationary hydrograph temporal signa ...

2023

Fiber pumps for wearable fluidic systems

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

Incorporating pressurized fluidic circuits into textiles can enable muscular support, thermoregulation, and haptic feedback in a convenient wearable form factor. However, conventional rigid pumps, with their associated noise and vibration, are unsuitable f ...

American Association for the Advancement of Science2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi, Helena Luisa Teixido Pedarros

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Research data supporting 'Fiber pumps for wearable fluidic systems'

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

The dataset supporting 'Fiber pumps for wearable fluidic systems', published in Science in March 2023. In this work, we present a fluidic pump in the form of a flexible and stretchable tube. These tubes - or 'fiber pumps' - can generate significant fluidic ...

2023

Numerical analysis of apparatus-induced dispersion for density-dependent solute transport in porous media

David Andrew Barry, Hong Zhang

The effects of apparatus-induced dispersion on nonuniform, density-dependent flow in a cylindrical soil column were investigated using a finite-element model. To validate the model, the results with an analytical solution and laboratory column test data we ...

2023

Dynamic stall characterisation and control for vertical-axis wind turbines

Sébastien Le Fouest

According to the International Energy Agency, the global net-zero emissions objective requires the installed wind power capacity to increase 11-fold between 2020 and 2050. The scientific community has recently voiced concerns about the logistic feasibility ...

EPFL2023

Plasma sputtering of biased electrodes in an oblique magnetic field

Stefano Alberti, Ivo Furno, Alessandro Geraldini

The surface erosion of biased electrodes immersed in a radio frequency (RF) plasma was investigated in oblique magnetic fields ranging from 0.1 T to 3.5 T. The plasma potential and density in the vicinity of the biased electrode have been measured using an ...

IOP Publishing Ltd2023

Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization

Mario Paolone, Elena Vagnoni, Aldo Leonardo Alerci

Hydropower plants play a crucial role in the power system facing ambitious renewable energy targets. Due to their inherent controllability, they are well suited to provide flexibility to the grid. However, an increased flexibility provision leads to a prol ...

Pergamon-Elsevier Science Ltd2023

Highly Efficient Miniaturized Magnetorheological Valves Using Electropermanent Magnets

Yves Perriard, Christian Köchli, Adrien Jean-Michel Thabuis, Sofia Lydia Ntella, Bhawnath Tiwari, Kenny Jeanmonod

Fluidic systems enable actuation in various applications, such as automotive, medical, and industrial robotics. Miniaturized valves constitute a fundamental controlling element of modern fluidic systems, intriguing the interest of many researchers. This le ...

2023