Publications related to Inkjet Printed Carbon Nanotube Electrodes for Measuring Pyocyaninand Uric Acid in a Wound Fluid Simulant and Culture Media

Related publications (31)

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

A Rapidly Responsive Sensor for Wireless Detection of Early and Mature Microbial Biofilms

Hubert Girault, Andreas Stephan Lesch, Bhawna Nagar, Wanderson Oliveira Da Silva

Biofilm-associated infections, which are able to resist antibiotics, pose a significant challenge in clinical treatments. Such infections have been linked to various medical conditions, including chronic wounds and implant-associated infections, making the ...

Wiley-VCH Verlag GmbH2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Andreas Stephan Lesch, Horst Pick

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

Advances in the Sensing and Treatment of Wound Biofilms

Hubert Girault, Sorour Darvishi

Wound biofilms represent a particularly challenging problem in modern medicine. They are increasingly antibiotic resistant and can prevent the healing of chronic wounds. However, current treatment and diagnostic options are hampered by the complexity of th ...

Wiley-VCH Verlag GmbH2022

Low-temperature and rapid photo-annealing process for metal-oxide thin-film transistors using combined excimer deep-ultraviolet and intensely pulsed light irradiation

Jaemin Kim

The fabrication of high-performance metal-oxide-based thin-film transistors (TFTs) on flexible and transparent polymer substrates by solution processes has garnered substantial interest, particularly for manufacturing flex-ible electronics. However, the an ...

ELSEVIER2022

Configurable Organic Electrochemical Transistors with Printed Functional Materials for Multiplexed Sweat Analysis

Silvia Demuru

Monitoring human sweat with wearable biochemical sensors could give insights into the hydration, fatigue, and health status, tracking the variations of biomarkers non-invasively and in real-time. In this field, organic electrochemical transistors (OECTs) a ...

EPFL2022

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Deep-UV approaches and printing of indium zinc oxide thin-film transistors targeting their processing on thermosensitive substrates

Alessio Mancinelli

Novel metal-oxides (MOx) semiconductors for thin-film transistors (TFTs) are being developed as they can offer superior electric performances over organic-based counterparts. MOx TFTs processed on foil could be exploited in smart labels as RFID and NFC tag ...

EPFL2021

Inkjet printed mesoscopic perovskite solar cells with custom design capability

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh

Customizable solar cells are required for aesthetic indoor and outdoor photovoltaic deployment as well as for the freedom of design of small and portable power supplies. We demonstrate that drop on demand inkjet printing can be used for the fabrication of ...

ROYAL SOC CHEMISTRY2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Andreas Stephan Lesch, Horst Pick, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Diego Ghezzi, Laura Ferlauto, Eleonora Borda, Nenad Marjanovic, Fabian Michael Lütolf

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Towards industrialization of perovskite solar cells using slot die coating

Frank Nüesch, Jakob Heier

Carbon-based hole transport layer-free carbon mesoscopic perovskite solar cells (MPSCs) are considered to be cell architectures with high potential for commercialization, due to their enhanced stability. In the standard process for large area and module fa ...

Royal Society of Chemistry2020

Dimensional scaling of high-speed printed organic transistors enabling high-frequency operation

Vivek Subramanian

Printed electronics has promised to deliver low-cost, large-area and flexible electronics for mass-market applications for some time; however, so far one limiting factor has been device performance. Over the last decade, great progress has been made in ter ...

IOP PUBLISHING LTD2020

Inkjet-Printed TiO2/Fullerene Composite Films for Planar Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Emad Oveisi, Hiroyuki Kanda, Aron Joel Huckaba, Inés Garcia Benito

Perovskite solar cells have garnered and held international research interest, due to ever-climbing power conversion efficiency values, now >25 %. Some high efficiency configurations utilize a compact TiO2 layer underneath a mesoporous TiO2 layer, both of ...

WILEY-V C H VERLAG GMBH2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020