Publications related to Three-dimensional microfabrication through a multimode optical fiber

Related publications (32)

Quench Detection and Temperature Measurement With Fiber Optic Sensors

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

IEEE Institute of Electrical and Electronics Engineers2024

High energy-density electrostatic actuators for soft robotics

Sylvain Thomas Schaller

This thesis reports high energy-density electrostatic actuators for use in soft robotics. This thesis has two main parts: a) a detailed study of electro-adhesion using microfabricated electrodes, and b) a flexi-ble fiber-shaped linear motor. Electro-adhesi ...

EPFL2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Tunable pump compression and fast modulation for pulsed THz generation

Ileana-Cristina Benea-Chelmus, Alessandro Tomasino, Yazan Lampert Almahmoud, Shima Rajabali

We demonstrate tunable dispersion compensation of femtosecond pulses at telecom wavelengths for broadband Terahertz generation in 7.5-meter fiber link using a Silicon prism pair. The prism pair enhances the amplitude of the THz E-field in InGaAs photocondu ...

IEEE2023

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

Space-time wave packets with reduced divergence and tunable group velocity generated in free space after multi-mode fiber propagation

Tobias Kippenberg, Maxim Karpov

Previously, space-time wave packets (STWPs) have been gen-erated in free space with reduced diffraction and a tunable group velocity by combining multiple frequency comb lines each carrying a single Bessel mode with a unique wave num-ber. It might be poten ...

Optica Publishing Group2023

Spatiotemporal dissipative soliton resonances in multimode fiber lasers

Haoye Qin, Gang Wang

Spatiotemporal mode-locking in multimode fiber lasers is intriguing for the complex nonlinear dynamics and the increase of theoretical energy limit. In this paper, we enrich spatiotemporal mode-locking with dissipative soliton resonances, a kind of soliton ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Humidity-insensitive optical fibers for distributed sensing applications

Luc Thévenaz, Tiago Filipe Pimentel Das Neves

Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which s ...

2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

3D printed fiber-optic nanomechanical bioprobe

Sandor Kasas, Jiangtao Zhou

Ultrasensitive nanomechanical instruments, e.g. atomic force microscopy (AFM), can be used to perform delicate biomechanical measurements and reveal the complex mechanical environment of biological processes. However, these instruments are limited because ...

IOP Publishing Ltd2023

Soft Bending Actuator With Fiber-Jamming Variable Stiffness and Fiber-Optic Proprioception

Sudong Lee

Soft actuators with a function of variable stiffness are beneficial to the improvement of the adaptability of robots, expanding the application areas and environments. We propose a tendon-driven soft bending actuator that can change its stiffness using fib ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Hybrid lithium niobate-on-silicon nitride platform for mid-IR supercontinuum generation

Tobias Kippenberg, Mikhail Churaev

Integrated optics has shown itself very convenient for exploiting nonlinear processes as it results in high confinement factor, freedom of dispersion engineering and compactness. However, the choice of materials is crucial for the development of nonlinear ...

SPIE-INT SOC OPTICAL ENGINEERING2023

Domain Imaging and Switching Dynamics in BaTiO3-Based Photonic Integrated Devices

Jacqueline Geler Kremer

Keeping up with our constantly connected lifestyle of instant messages and video streaming has its repercussions. Data centers have been gobbling up resources becoming a significant share of the energy used worldwide. To keep up with demand and curb the en ...

EPFL2023

Thermally Drawn Elastomer Nanocomposites for Soft Mechanical Sensors

Fabien Sorin, Yunpeng Qu, Andreas Leber, Inès Richard, Chaoqun Dong, Stella Andréa Françoise Laperrousaz

Stretchable and conductive nanocomposites are emerging as important constituents of soft mechanical sensors for health monitoring, human-machine interactions, and soft robotics. However, tuning the materials' properties and sensor structures to the targete ...

WILEY2023

High-efficiency non-ablative UV laser nano-scale processing of fused silica by stable filamentation

Yves Bellouard, Benedikt Hermann

Over the last decades, three-dimensional micro-manufacturing of fused silica via near-infrared ultrafast laser exposure combined with an etching step has become an established technique for producing complex three-dimensional components. Here, we explore t ...

2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Nanoscale local modification of PMMA refractive index by tip-enhanced femtosecond pulsed laser irradiation

Mihai Adrian Ionescu

Tip-enhanced optical effects have enabled a wide palette of nanoscale investigation techniques and recently they were successfully used to modify and manipulate matter with nanoscale spatial resolution. We contribute to this latter area by reporting a viab ...

ELSEVIER2023

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Jürgen Brugger, Arnaud Bertsch, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023