Piezoresponse force microscopy on doubly clamped KNbO3 nanowires

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an ...

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

Label-free biosensors, combined with miniaturized micro-electromechanical sensory platforms, offer an attractive solution for real-time and facile monitoring of biomolecules due to their high sensitivity and selectivity without the need for specifically la ...

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

Dielectric elastomer transducers are elastic capacitors that respond to mechanical or electrical stress. They can be used in applications such as millimeter-sized soft robots and harvesters of the energy contained in ocean waves. The dielectric component o ...

We report on the design and characterization of two inductive proximity sensors based on LC oscillators operating at 500 MHz. The distance from the target is obtained by measuring the oscillation frequency variation. Both sensors contain an off-chip LC res ...

In this work, the emergence of polarization and electro-mechanical coupling in Pb(Mg1/3Nb2/3)O3 and Pb(Mg1/3Nb2/3)O3 â PbTiO3 was investigated by means of thermally stimulated current, and nonlinear dielectric and electro-mechanical measurements. The pre ...

Dielectric elastomer actuators (DEAs) are interesting soft actuators compared to other actuation technologies owing to large achievable actuation strains, high energy density and fast actuation. However, because DEAs need to be operated under high electric ...

The emergence of wide bandgap power devices has brought the attention back to the flying capacitor (FC) multilevel inverters with a large number of stages, in an effort to increase the power density by minimizing the passive components. The main challenge ...

Composite films based on dispersions of bismuth ferrite (BiFeO3) in polyvinylidene fluoride (PVDF) matrixes were prepared in the presence of multiwalled-carbon-nanotubes (MWCNT), using xanthan gum (XG) as dispersant. Films were prepared by spin coating and ...

Ferroelectric perovskite oxides are widely used in sensors, actuators and optical modulators and, at the same time, they show promise for implementation in future applications such as energy storage, memory and cooling devices. At the infancy of the discov ...

Piezoelectrics are materials that linearly deform in response to an applied electric field. As a fundamental prerequisite, piezoelectric materials must have a noncentrosymmetric crystal structure. For more than a century, this has remained a major obstacle ...

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

Ferroelectricity has made a huge impact on science and technology since Joseph Valasek (then a Ph.D. student at the University of Minnesota) discovered it in 1920, a little longer than 100 years ago. Whereas Dr. Valasek's original research was motivated by ...

The role of deep defects and their physical origin in InGaN/GaN LED are still widely investigated and debated, in particular their impact on the electrical and optical characteristics and on the reliability of the device. In this paper we evaluate the elec ...

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

The main objective of this PhD thesis is to link the atomic scale structure to the catalytic properties of self-assembled nanostructures. The growth and characterization of these nanostructures was carried out in an ultra-high vacuum (UHV) chamber initiall ...

HfO2-based ferroelectrics are considered a promising class of materials for logic and memory applications due to their CMOS compatibility and ferroelectric figures of merit. A steep-slope field-effect-transistor (FET) switch is a device for logic applicati ...

Nanowire-based devices can potentially be of use in a variety of electronic applications, from ultrascaled digital circuits to 5G communication networks. However, the devices are typically restricted to low-power applications due to the relatively low elec ...

Piezoresponse force microscopy on doubly clamped KNbO3 nanowires

Chat with Graph Search

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Tailor-made Piezoelectric Elastomer Materials

A Front-End CMOS Interface Circuit With High Voltage Charge Pump and Oscillator for Capacitive Micromachined Ultrasonic Transducers

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Synthesis of polysiloxane elastomers modified with sulfonyl side groups and their electromechanical response

500 MHz high resolution proximity sensors with fully integrated digital counter

Nonlinear electro-mechanical coupling and thermally stimulated currents in relaxor ferroelectrics

Lifetime of dielectric elastomer actuators under DC electric fields

A Generalized Phase-Shift PWM Extension for Improved Natural and Active Balancing of Flying Capacitor Multilevel Inverters

Stress effects on the impedance and ferroelectricity of PVDF-BiFeO3-MWCNT films using xanthan gum as dispersant

Ferroelectric Effects Probed by in situ Transmission Electron Microscopy

Induced giant piezoelectricity in centrosymmetric oxides

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Recent Advances in Piezoelectric Materials for Electromechanical Transducer Applications

Modeling the electrical characteristic of InGaN/GaN blue-violet LED structure under electrical stress

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

An Experimental Setup for Heterogeneous Catalysis on Atomically Defined Metal Nanostructures

Intrinsic switching in Si-doped HfO2: A study of Curie-Weiss law and its implications for negative capacitance field-effect transistor

Multi-channel nanowire devices for efficient power conversion