Publications related to Polymeric Ionic Liquids: Comparison of Polycations and Polyanions

Related publications (33)

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant-Greber

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Deriving Major Ion Concentrations at High Resolution from Continuous Electrical Conductivity Measurements in Karst Systems

Paolo Benettin

Time series of hydrochemical parameters support the investigation of dominant karst hydrological processes and conceptual model structures. Nevertheless, high costs for sample collection and analyses cause hydrochemical data to be rarely available at a suf ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Mounir Driss Mensi

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

Nature Portfolio2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Pathways to enhance electrochemical CO2 reduction identified through direct pore-level modeling

Sophia Haussener, Etienne Boutin, Shuo Liu, Evan Fair Johnson

Electrochemical conversion of CO2 to fuels and valuable products is one pathway to reduce CO2 emissions. Electrolyzers using gas diffusion electrodes (GDEs) show much higher current densities than aqueous phase electrolyzers, yet models for multi-physical ...

2023

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Andreas Züttel, Wen Luo, Liping Zhong, Thi Ha My Pham, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen

CO-selective metals (e.g., Ag) on Cu catalysts improve the selec-tivity of multi-carbon (C2+) products in electrochemical CO2 reduc-tion. However, the origin of the improvement remains unclear due to the convolution of tandem and interface effects. Here, A ...

ELSEVIER2022

Ionization Difference between Weak and Strong Electrolytes as Perturbed by Conductivity Spectra Analysis

Vasily Artemov

While the static structure of aqueous electrolytes has been studied for decades, their dynamic microscopic structure remains unresolved yet critical in many areas. We report a comparative study of dc and ac (1 Hz to 20 GHz) conductivity data of weak and st ...

AMER CHEMICAL SOC2022

Monocarborane cluster as a stable fluorine-free calcium battery electrolyte

Andreas Züttel, Kun Zhao

High-energy-density and low-cost calcium (Ca) batteries have been proposed as 'beyond-Li-ion' electrochemical energy storage devices. However, they have seen limited progress due to challenges associated with developing electrolytes showing reductive/oxida ...

Nature Portfolio2021

Energy Level Alignment at the Cobalt Phosphate/Electrolyte Interface: Intrinsic Stability vs Interfacial Chemical Reactions in 5 V Lithium Ion Batteries

Nicola Marzari, Matteo Cococcioni

The intrinsic stability of the 5 V LiCoPO4-LiCo2P3O10 thin-film (carbon-free) cathode material coated with MoO3 thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with firstprinciple calculations. The at ...

AMER CHEMICAL SOC2022

Light-induced assembly and disassembly of polymers with PdnL2n-type network junctions

Kay Severin, Cristian Pezzato, Cesare Berton, Rujin Li

Polymers containing PdnL2n complexes as network junctions were obtained by reaction of poly(ethylene glycol)-linked N-donor ligands with Pd2+. The addition of a metastable state photoacid renders the networks light sensitive, and gel–sol transitions can be ...

2021

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

The solid-state Li-ion conductor Li7TaO6: A combined computational and experimental study

Nicola Marzari, Aris Marcolongo, Leonid Kahle

We study the oxo-hexametallate Li7TaO6 with first-principles and classical molecular dynamics simulations, obtaining a low activation barrier for diffusion of similar to 0.29 eV and a high ionic conductivity of 5.7 x 10(-4) S cm(-1) at room temperature (30 ...

ELSEVIER2020

Perspective-Electrochemical Stability of Water-in-Salt Electrolytes

Corsin Battaglia, David Reber

The water-in-salt approach has expanded the electrochemical stability window of aqueous electrolytes, enabling novel aqueous batteries with relatively high cell voltages and energy densities. However, the stability of these electrolytes tends to be overest ...

2020

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020

Anion Selection Criteria for Water-in-Salt Electrolytes

Maximilian Becker, Corsin Battaglia, David Reber

Water-in-salt electrolytes have enabled the development of novel high-voltage aqueous lithium-ion batteries. This study explores the reasons why analogous sodium electrolytes have struggled to reach the same level of electrochemical stability. Solution str ...

WILEY-V C H VERLAG GMBH2020

Nanocapillary confinement of imidazolium based ionic liquids

Aleksandra Radenovic, Sanjin Marion, Sebastian James Davis

Room temperature ionic liquids are salts which are molten at or around room temperature without any added solvent or solution. In bulk they exhibit glass like dependence of conductivity with temperature as well as coupling of structural and transport prope ...

2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020

Porous granules by freeze granulation of Pickering emulsions stabilized with halloysite particles

Paul Bowen

Pickering emulsions stabilized with a natural silicate mineral, halloysite, were dried by freeze granulation in order to prepare porous granules. Different formulations were studied, by varying the pH of the suspension, the ionic strength and with the addi ...

ELSEVIER2020

Self-Propulsion of Active Colloids via Ion Release: Theory and Experiments

Ignacio Pagonabarraga Mora

We study the self-propulsion of a charged colloidal particle that releases ionic species using theory and experiments. We relax the assumptions of thin Debye length and weak nonequilibrium effects assumed in classical phoretic models. This leads to a numbe ...

2020