Publications related to Hardening acceleration/hardening retardation composition for building materials

Related publications (29)

Modeling friction and wear using an adaptive discrete-continuum coupling

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Spatial Distributions of Diarrheal Cases in Relation to Housing Conditions in Informal Settlements: A Cross-Sectional Study in Abidjan, Côte d’Ivoire

Jérôme Chenal, Vitor Pessoa Colombo, Jürg Utzinger

In addition to individual practices and access to water, sanitation, and hygiene (WASH) facilities, housing conditions may also be associated with the risk of diarrhea. Our study embraced a broad approach to health determinants by looking at housing depriv ...

2023

New tools for phase segmentation and denoising of analytical STEM data for enhanced chemical sensitivity, applied to Earth mantle research

Hui Chen, Hui Chen

This thesis is dedicated to developing innovative methodologies that improve elemental quantification in scanning transmission electron microscopy (STEM) using energy-dispersive X-ray spectroscopy (EDXS). The primary motivation stems from a geochemistry pr ...

EPFL2023

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yiru Yan, Yu Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Mahsa Bagheri

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

Ludger Weber, Manoj Kondibhau Naikade

A relation for an adequate pore fraction needed to obtain residual Si and C free composites via reactive Si-X alloy infiltration is presented. The volume ratio of SiC and carbonaceous phase, the composition of the infiltrating liquid and the apparent densi ...

ELSEVIER SCI LTD2022

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)

Karen Scrivener, Émilie Michèle L'Hôpital, Yu Yan

This paper investigates the effect of KOH and NaOH on C-S-H structure and solubility. Both KOH and NaOH have a similar effect, they increase pH values and silicon concentrations, and decrease calcium concentrations. At higher alkali hydroxide concentration ...

Pergamon-Elsevier Science Ltd2022

Development of High-Strength Aluminum Alloys for Additive Manufacturing

Marvin Lennard Schuster

Metal additive manufacturing (AM) offers the possibility to rapidly produce complex geometries that are not achievable with conventional manufacturing methods. The two most common technologies, Laser Powder Bed Fusion (LPBF) and Direct Metal Deposition (DM ...

EPFL2022

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021

Tissue Engineering with Mechanically Induced Solid‐Fluid Transitions

Mahmut Selman Sakar, Jaemin Kim, Ece Özelçi, Erik Mailand, Nikolaos Bouklas, Matthias Rüegg

Epithelia are contiguous sheets of cells that stabilize the shape of internal organs and support their structure by covering their surfaces. They acquire diverse morphological forms appropriate for their specific functions during embryonic development, suc ...

Wiley2021

Structure-Property Relationships in Complex Materials by Combining Supervised and Unsupervised Machine Learning

Benjamin Aaron Helfrecht

The work presented in this thesis combines supervised and unsupervised machine learning to examine structure-property relationships in databases of materials. While either supervised learning or unsupervised learning alone can be a powerful tool for assess ...

EPFL2021

Aggregate dissolution in different pore solutions

Mahsa Bagheri

The occurrence of cracking due to alkali silica reaction (ASR) affects the service life of concrete structures. The dissolution of silica-containing minerals within aggregates causes the formation of ASR products, which fill macroscopic cracks and cause th ...

EPFL2021

Atomic scale investigations of fracture in metal alloys

Eleanor Yi Kei Mak

The demand for metal alloys with superior structural performance in industrial applications continues to increase, as does the need for more-energy efficient materials and methods. Many materials that are otherwise attractive for structural applications ar ...

EPFL2021

Blind predictions of shake table testing of aggregate masonry buildings

Katrin Beyer, Igor Tomic

In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advance ...

2020

Study on Mechanical Performance of Prestressed UHPFRC U-Beam Bridges

Eugen Brühwiler

The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...

2021

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021