Publication

Frequency Analysis of Finite Steel Cylinders and their Comparison to Complex Cylinder-like Targets using an Electromagnetic Induction Sensor

Related publications (26)

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

Multi-Frequency Tracking via Group-Sparse Optimal Transport

Isabel Haasler

In this letter, we introduce an optimal transport framework for inferring power distributions over both spatial location and temporal frequency. Recently, it has been shown that optimal transport is a powerful tool for estimating spatial spectra that chang ...

Ieee-Inst Electrical Electronics Engineers Inc2024

A Softening Constitutive Law and Gradient-Inelastic Fiber-Based Element for 3-Dimensional Frame Simulations Under Seismic Excitations

Diego Isidoro Heredia Rosa

Steel frame structures are essential components of modern infrastructure. Understanding their behavior under seismic loading is critical for ensuring public safety and minimizing damage that occurs during earthquakes. To accurately predict the response of ...

EPFL2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Maléna Bastien Masse, Numa Joy Bertola, Célia Marine Küpfer, Corentin Jean Dominique Fivet

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Geometric tolerances of welded connections with inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos, Ce Wen

Prequalified beam-to-column connections in steel moment resisting frames usually concentrate inelastic deformations in the steel beam ends. As such, nonlinear geo-metric instabilities (i.e., local buckling) may occur in these regions at modest lateral drif ...

Ernst & Sohn2023

The new Chapter 9 of Eurocode 8 Part 3 for Seismic Assessment of Existing Steel Structures

Dimitrios Lignos

The seismic assessment of existing steel structures necessitates the development of practice- oriented engineering models for use in nonlinear static and dynamic analysis procedures. These models should encompass the full range of the anticipated nonlinear ...

2023

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

Stefano Mischler, Anna Neus Igual Muñoz

The main output from an Electrochemical Quartz Crystal Microbalance is a frequency shift. This note describes how to separate the mass- and viscous load contributions to this shift by a calibration procedure. The mass calibration is made by electroplating ...

MDPI2023

Characterization of High Harmonic Frequencies in Reactor Noise Experiments Within the CORTEX Project

Andreas Pautz, Vincent Pierre Lamirand

We present a novel technique of neutron noise detection and experimental data interpretation developed during the EU H2020 project CORTEX aiming to improve the capabilities for identification and localization of neutron noise sources. The experimental data ...

2022

Experimental investigation of a keying joint cast in UHPFRC between precast UHPFRC bridge elements

Eugen Brühwiler, Enrique García, Ngoc Thanh Trinh, Numa Joy Bertola

Ultra High-Performance Fiber-Reinforced Cementitious Composite (UHPFRC) is increasingly popular for new structural designs thanks to its high resistance both in tension and compression. When UHPFRC is complemented with steel reinforcing bars or prestressin ...

2022

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

An Efficient Signal-to-noise Approximation for Eccentric Inspiraling Binaries

Alexandra Shelest

Eccentricity has emerged as a potentially useful tool for helping to identify the origin of black hole mergers. However, eccentric templates can be computationally very expensive owing to the large number of harmonics, making statistical analyses to distin ...

IOP Publishing Ltd2022

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Fragility Assessment of Beam-Slab Connections for Informing Earthquake-Induced Repairs in Composite-Steel Moment Resisting Frames

Dimitrios Lignos, Hammad El Jisr

Earthquake loss estimation in composite-steel moment resisting frames (MRFs) necessitates a proper estimation of the level of damage in steel beam-to-slab connections. These usually feature welded headed shear studs to ensure the composite action between t ...

2021

Reduced-order Models for Simulating Coupled Geometric Instabilities in Steel Beam-columns Under Inelastic Cyclic Straining

Alexander Riley Hartloper

Numerical models that can simulate coupled geometric instabilities in steel beam-columns are required for the seismic assessment of certain steel moment-resisting frames. Reliably simulating coupled instabilities requires that the steel material is precise ...

EPFL2021

Fiber-based hysteretic model for simulating strength and stiffness deterioration of steel hollow structural section columns under cyclic loading

Dimitrios Lignos

An efficient component model has been developed that captures strength and stiffness deterioration of steel hollow structural section (HSS) columns. The proposed model consists of two fiber-based segments at a member's ends along with an elastic segment in ...

2020

Dynamic response of a compressible binary fluid mixture

Ignacio Pagonabarraga Mora

Binary fluids are present in a wide variety of systems at microscales, such as microfluidic devices containing drops, fluids with air bubbles trapped in them, and devices designed to mix fluids or to make two fluid substances react. Microfluidics devices a ...

2020

Time-Frequency Characterization of Resting-State Brain Function Reveals Overlapping Components with Specific Topology and Frequency Content

Dimitri Nestor Alice Van De Ville, Thomas William Arthur Bolton

Even at rest, functional magnetic resonance imaging (fMRI) data displays exquisitely complex temporal dynamics. Here, we deployed a time-frequency analysis to track the modulus of fMRI signals over time, across space (a set of 341 brain areas) and frequenc ...

ASSOC COMPUTING MACHINERY2019

Behavior of prestressed CFRP plates bonded to steel substrate: Numerical modeling and experimental validation

Elyas Ghafoori, Ardalan Hosseini, Masoud Motavalli

In recent years, retrofitting of steel structures has emerged as a major issue in structural engineering and construction management. As the adhesive bond is often the critical aspect controlling the actual performance of steel profiles externally strength ...

ELSEVIER SCI LTD2019

Strengthening of metallic members under mixed mode fatigue loading using prestressed CFRP plates

Ardalan Hosseini

The strengthening of existing steel structures against high-cycle fatigue (HCF) loading has become one of the most important topics of interest in structural rehabilitation. Apart from the conventional strengthening techniques that incorporate bulky and he ...

EPFL2019