Publications related to Compact Fourier transform spectrometers using FR4 platform

Related publications (26)

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Johann Emmeram Riemensberger, Chen Yang, Mikhail Churaev, Xinru Ji, Terence Albert Emile Blésin, Xi Wang, Zihan Li, Alisa Davydova, Chengli Wang, Wil Kao, Junyin Zhang

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

Herbert Shea, Amir Firouzeh, Edouard Franck Vincent Gustave Leroy

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...

SPRINGERNATURE2023

Cost-effective equalization of electro-optic frequency combs in a Sagnac interferometer

Camille Sophie Brès, Jianqi Hu, Ivan Cardea

We present a cost-effective electro-optic frequency comb generation and equalization method using a single phase modulator inserted in a Sagnac interferometer layout. The equalization relies on the interference of comb lines generated in both clockwise and ...

Optica Publishing Group2023

Linear and nonlinear applications of miniaturized silicon nitride microresonators

Arslan Sajid Raja

Photonic integrated circuits (PICs) are the subject of massive interest due to the range of applications they can provide at a huge scale while building on well-established CMOS technologies. One of the critical parameters defining a technology's maturity ...

EPFL2023

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Strained crystalline nanomechanical resonators with quality factors above 10 billion

Tobias Kippenberg, Sergey Fedorov, Nils Johan Engelsen, Alberto Beccari

In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, called dissipation dilution, is employed in mirror suspensions of gravitational-wave interferometers and at t ...

NATURE PORTFOLIO2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Molybdenum disulphide nanoporous membranes as nanofluidic platforms - large-area engineering and study

Michal Daniel Macha

The work demonstrated in this thesis represent the path towards developing the large-scale fabrication of two-dimensional nanoporous membrane devices and use thereof as platforms to study nanoscale physics of water and ion flow through confined channels. M ...

EPFL2022

Probing unconventional performance of fiber resonators: light storage, generation and manipulation

Ivan Cardea

This thesis aims at investigating the performance of figure-9 (figure-of-nine) optical fiber resonators as a practical solution for light storage, light generation and manipulation. The first part of the thesis focuses on a theoretical and experimental stu ...

EPFL2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Doping challenges and pathways to industrial scalability of III–V nanowire arrays

Anna Fontcuberta i Morral, Lucas Güniat, Wonjong Kim, Valerio Piazza

Semiconductor nanowires (NWs) have been investigated for decades, but their application into commercial products is still difficult to achieve, with triggering causes related to the fabrication cost and structure complexity. Dopant control at the nanoscale ...

2021

From NANOGrav to LIGO with metastable cosmic strings

Valerie Fiona Domcke

We interpret the recent NANOGrav results in terms of a stochastic gravitational wave background from metastable cosmic strings. The observed amplitude of a stochastic signal can be translated into a range for the cosmic string tension and the mass of magne ...

2020

Silicon Nitride Integrated Nonlinear Photonics

Junqiu Liu

Recently, microresonator-based dissipative Kerr soliton frequency combs ( "soliton microcomb " ) have emerged as miniaturized optical frequency combs. So far, soliton microcombs have been realized in many CMOS-compatible material platforms including silico ...

EPFL2020

High-Performance III-V MOSFETs and Tunnel-FETs Integrated on Silicon

Clarissa Convertino

Silicon transistor scaling is approaching its end and a transition to novel materials and device concepts is more than ever essential. High-mobility compound semiconductors are considered promising candidates to replace silicon, targeting low-power logic a ...

EPFL2020

Wafer-scale fabrication of ultralow-loss silicon nitride nonlinear photonic circuits

Rui Ning Wang, Tobias Kippenberg, Maxim Karpov, Junqiu Liu, Miles Henry Anderson, Arslan Sajid Raja, Nils Johan Engelsen, Wenle Weng, Anton Lukashchuk, Guanhao Huang, Jijun He, Mikhail Churaev, Anat Siddharth, Alexey Tikan

Recent advances in silicon nitride integrated photonics have achieved ultralow optical losses. Transferring this technology to standard commercial foundries, and merging it with silicon photonics via heterogeneous integration, will seed novel laser and qua ...

IEEE2020

Monolithic piezoelectric control of soliton microcombs

Rui Ning Wang, Tobias Kippenberg, Erwan Guillaume Albert Lucas, Junqiu Liu, Miles Henry Anderson, Arslan Sajid Raja, Wenle Weng, Tianyi Liu, Jijun He

High-speed actuation of laser frequency(1)is critical in applications using lasers and frequency combs(2,3), and is a prerequisite for phase locking, frequency stabilization and stability transfer among optical carriers. For example, high-bandwidth feedbac ...

NATURE PUBLISHING GROUP2020

Crystal Phase Engineering in III-V Semiconductor Films: from Epitaxy to Devices

Philipp Staudinger

Crystal phase engineering is an exciting pathway to enhance the properties of conventional semiconductors. Metastable SiGe presents a direct band gap well suited for optical devices whereas wurtzite (WZ) phosphide alloys enable efficient light emission in ...

EPFL2020

Thermomechanical Nanocutting of 2D Materials

Giovanni Boero, Jürgen Brugger, Samuel Tobias Howell, Xia Liu, Ana Conde Rubio

Atomically thin materials, such as graphene and transition metal dichalcogenides, are promising candidates for future applications in micro/nanodevices and systems. For most applications, functional nanostructures have to be patterned by lithography. Devel ...

Wiley2020