Publications related to Exploration of spatial structures made from reused elements and the design of optimal kits-of-parts

Related publications (28)

Towards edible robots and robotic food

Dario Floreano, Jun Shintake, Bokeon Kwak, Markéta Pankhurst

Edible robots and robotic food — edible systems that perceive, process and act upon stimulation — could open a new range of opportunities in health care, environmental management and the promotion of healthier eating habits. For example, they could enable ...

2024

Reuse of cut concrete slabs in new buildings for circular ultra-low-carbon floor designs

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

The study explores an original idea that responds to the urgent need to reduce the detrimental environmental impacts of load-bearing floor construction in new buildings by reusing saw-cut reinforced concrete (RC) pieces salvaged from soon-to-be demolished ...

2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Corentin Jean Dominique Fivet, Numa Joy Bertola, Maléna Bastien Masse, Célia Marine Küpfer

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Paul Joseph Dyson, Xinbang Wu, Mingyang Liu

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a su ...

Nature Portfolio2024

Teaching Not To

Charlotte Malterre-Barthes

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Corentin Jean Dominique Fivet, Stefana Parascho, Maxence Grangeot, Qianqing Wang

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

Optimal Short-Term Dispatch of Pumped-Storage Hydropower Plants Including Hydraulic Short Circuit

Mario Paolone, Sidi-Rachid Cherkaoui, Elena Vagnoni, Francesco Gerini

This paper proposes a methodology to optimize the dispatch and reserve between multiple units in a Hydroelectric Power Plant (HPP) that makes use of the Hydraulic Short Circuit (HSC) operating mode. HSC allows for the simultaneous generation and pumping fr ...

IEEE Institute of Electrical and Electronics Engineers2024

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

A large part of building demolitions is motivated by purely socio-economic reasons. Hence, about-to-be-demolished structures, commonly made of reinforced concrete, very often present no or little degradation. When adaptive reuse of the entire building is n ...

2024

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel " fruto-Fenton " process, effective over a wide pH range (4-9)

César Pulgarin, Stefanos Giannakis, Aline Laetitia Schaub

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared wi ...

Pergamon-Elsevier Science Ltd2024

Decision support methodology for waste-to-value process integration

Rafael Amorim Leandro De Castro Amoedo

Waste treatment is a complex procedure that comprises multidimensional aspects. The challenges posed by the energy transition and international protocols emphasize the role of waste in its material and energy dimension. With an increasing population and li ...

EPFL2023

Low-tech methods for the reuse of reinforced concrete structural elements

Nicole Widmer, Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

Most of existing buildings are made of concrete, new buildings are being built with it and others are demolished when still in good structural condition. This drives increased demands for raw materials, greenhouse gas emissions, and an accumulation of demo ...

2023

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023

A Reuse-Ready Timber Slab-and-Column System for Modular Building Structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Jonas Warmuth, Edisson Xavier Estrella Arcos, Alex-Manuel Muresan

The construction industry is a significant contributor to resource consumption and waste generation. To address this issue, component reuse has been proposed as a way to prevent valuable building elements from being discarded and avoid producing new ones. ...

Curran Associates, Inc.2023

Reusability Assessment of Obsolete Reinforced Concrete Structural Components

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes

The production of concrete, the most widely used construction material, detrimentally affects the environment. Obsolete reinforced concrete (RC) load-bearing structures, even when still in good condition, are today prematurely crushed and landfilled or rec ...

Springer2023

On the role of system integration in plastic waste management

François Maréchal, Ivan Daniel Kantor, Julia Granacher

The management of plastic waste is a growing concern that can harm wildlife and ecosystems, and its end-of-life policies are key to mitigating plastic environmental impact. This work presents a decision-making methodology for the thermal and material valor ...

Elsevier2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Selection and Optimal Use of Nanoporous Materials for Adsorption Energy Technologies

Emanuele Piccoli

Due to the large waste of heat in the power and industrial sectors, our use of energy is inefficient. Moreover, it relies on rapidly depleting and greenhouse-gas-emitting sources such as fossil fuels. While the scarcity of energy resources is a relevant so ...

EPFL2023

Circularity by stock in Sri Lanka: Economic necessity meets urban fabric renovation

Paolo Tombesi, Milinda Pathiraja

Persistent fiscal and political mismanagement, together with the financial pressures of the COVID-19 pandemic, have driven Sri Lanka into a social and economic crisis triggering a decrease in national foreign exchange reserves, an inability to purchase vit ...

FRONTIERS MEDIA SA2023