Publications related to Characterization of solvent-filled polyurethane/urea-formaldehyde core-shell composites

Related publications (25)

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Diformylxylose as a new polar aprotic solvent produced from renewable biomass

Jeremy Luterbacher, Anastasiia Komarova, Graham Reid Dick

Lignin is a promising candidate for the replacement of fossil-based materials, due to its natural abundance and aromatic structure. This same structure poses major challenges to lignin's exploitation for material development. The harsh conditions generally ...

2021

Preliminary design and analysis of Liquid Fuel Molten Salt Reactor using multi-physics code GeN-Foam

Carlo Fiorina

In this study, a hypothetical fast spectrum Liquid Fuel Molten Salt Reactor (LFMSR) core is modeled using the multiphysics C++ code GeN-Foam (General Nuclear Foam). GeN-Foam is based on OpenFOAM, a C++ opensource library for solution of continuum mechanics ...

ELSEVIER SCIENCE SA2020

Extension of the nodal code DYN3D to SFR applications

Evgeny Nikitin

DYN3D is a well-established Light Water Reactor (LWR) simulation tool and is being extended for safety analyses of Sodium cooled Fast Reactors (SFRs) at the Helmholtz-Zentrum Dresden-Rossendorf. This thesis focuses on the first stage of the development pro ...

EPFL2019

Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure

Fernando Naya Montans, John Botsis, Georgios Pappas

Fiber reinforced polymers (FRPs) subjected to mode I fracture show important toughening due to the development of large scale bridging (LSB). Experimental studies of this phenomenon in unidirectional carbon/epoxy laminates using double cantilever beam spec ...

ELSEVIER SCI LTD2019

High-Fidelity Determination of Nuclide Inventories for Radioactive Waste Disposal

Valentyn Bykov

The general license application (RBG) for the Swiss deep geological repository will be submitted in 2024. Furthermore, the decommissioning of the nuclear power plants (NPPs) is coming soon, with the Mühleberg NPP (KKM) scheduled to shut down in 2019. In su ...

EPFL2019

Polymer derived silicon oxycarbide ceramic monoliths: Microstructure development and associated materials properties

Demetri Psaltis, Eirini Kakkava, Nicola Casati, Giulia Panusa

Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...

ELSEVIER SCI LTD2018

Conceptual Design of a Sustainable Waste Burning Molten Salt Reactor

Boris Aviv Hombourger

For an energy source to qualify as sustainable, it must maximize the efficiency with which it uses natural resources while minimizing the amounts of waste it produces. Currently deployed nuclear power plants however use a very limited amount of the energy ...

EPFL2018

Assessment of solvent capsule-based healing for woven fibre-reinforced epoxies

Erica Manfredi

Structural fibre-reinforced composites based on brittle matrices such as epoxy resins may be subject to short-term subcritical matrix damage that develops with time to the point where it may compromise the integrity of the structure. Currently, components ...

EPFL2015

Process-induced strains in RTM processing of polyurethane/carbon composites

Véronique Michaud, Luis Pablo Canal Casado

The development of residual strains and stresses is critical to manufacture composite structures with the required dimensional stability and mechanical performance. This work uses Fiber Bragg Grating (FBG) sensors to monitor strain build-up in carbon fiber ...

Elsevier2015

Appraisal of Core Analysis Methods against Zero-Power Experiments on Full-Scale BWR Fuel Assemblies

The present doctoral research aims at the appraisal of nodal core simulators used for the calculation of commercial boiling water reactor (BWR) cores, against measurements carried out at the Paul Scherrer Institute under the LWR-PROTEUS experimental progra ...

EPFL2012

The effect of processing conditions on the morphology, thermomechanical, dielectric, and piezoelectric properties of P(VDF-TrFE)/BaTiO3 composites

Jan-Anders Edvin Maansson, Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Sara Dalle Vacche, Fabiane Costa Oliveira Moffat

In this study (0-3) P(VDF-TrFE)/BaTiO3 composites containing up to 60 vol% of ceramic phase were prepared by solvent casting or compression molding. Their thermomechanical, dielectric, and piezoelectric properties were investigated, and discussed in the li ...

Springer Verlag2012

The Effect Of Processing Conditions On The Morphology, Mechanical And Electrical Properties Of Batio3-Polymer Composites

Jan-Anders Edvin Maansson, Véronique Michaud, Yves Leterrier, Sara Dalle Vacche

Ferroelectric ceramic – polymer composites have a unique mix of electrical and mechanical properties. Piezoelectric and pyroelectric activity, a wide range of dielectric constants and high breakdown strength are combined with mechanical flexibility, formab ...

2010

Elastomer Composites for Actuator Applications

Dielectric elastomers are highly promising as functional materials for the rapidly developing field of flexible actuator and generator technology. They offer a unique combination of low densities and large reversible deformations of up to more than 100% in ...

EPFL2010

On the insulator-conductor transition in polymer nanocomposites

Gianluca Ambrosetti

This thesis presents an investigation of the models describing electrical conductivity in polymer nanocomposites, which consist in more or less random dispersions of nanometric conductive fillers like carbon nanotubes, nanofibers or graphene sheets in a po ...

EPFL2010

Development and benchmarking of a mechanical model for GFR plate-type fuel

Rakesh Chawla, Konstantin Mikityuk

The reference fuel design currently being considered within the Generation-IV Gas-cooled Fast Reactor (GFR) project is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinders. The fuel is mixed plutonium-uranium carbide, whi ...

Elsevier Science Ltd.2009

Film stacking impregnation model for a novel net-shape thermoplastic composite preforming process

Jan-Anders Edvin Maansson, Véronique Michaud, Martyn Douglas Wakeman, Simon Jespersen

An impregnation model has been developed to evaluate the infiltration phenomena that occur during a novel near net shape preforming method. This process comprises automated deposition of thermoplastic resin and unidirectional (UD) carbon fibres to a pre-pr ...

2008

Development and characterization of the control assembly system for the large 2400 MWth Generation IV gas-cooled fast reactor

Rakesh Chawla, Konstantin Mikityuk, Gaëtan Girardin

The present paper is related to the design and neutronic characterization of the principal control assembly system for the reference large (2400 MWth) Generation IV gas-cooled fast reactor (GFR), which makes use of ceramic-ceramic (CERCER) plate-type fuel- ...

Elsevier Science Ltd.2008

Development and benchmarking of a 2D transient thermal model for GFR plate-type fuel

Rakesh Chawla, Konstantin Mikityuk

Several new fuel designs are currently being considered within the generation-IV gas-cooled fast reactor (GFR) project. One of them, which is the GFR reference design, is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinde ...

Elsevier Science Ltd.2007