Publications related to High power modular LED-based illumination system for lithography applications

Related publications (26)

Laser-based manufacturing of freeform glass micro-optics through topological transformation

Glass has been the material of choice for making optical elements, in large part due to its intrinsic properties: a temperature-dependent viscosity, which enables shaping the material into a broad variety of functional and artistic glassware. Silica glass ...

EPFL2024

III-N blue-emitting epi-structures with high densities of dislocations: Fundamental mechanisms for efficiency improvement and applications

Pierre Christophe Lottigier

Since the dawn of humanity, human beings seeked to light their surroundings for their well-being, security and development. The efficiency of ancient lighting devices, e.g. oil lamps or candles, was in the order of 0.03-0.04% and jumped to 0.4-0.6% with th ...

EPFL2024

Searching for Strong Gravitational Lenses

Frédéric Courbin, Cameron Alexander Campbell Lemon

Strong gravitational lenses provide unique laboratories for cosmological and astrophysical investigations, but they must first be discovered - a task that can be met with significant contamination by other astrophysical objects and asterisms. Here we revie ...

Springer2024

A Cavity-Microscope for Quantum Simulations with Locally-Controllable All-to-All Interactions

Nick Jacob Sauerwein

This thesis presents the development, construction, and benchmark of an experimental platform that combines cold fermionic 6Li atoms with locally controllable light-matter interactions. To enable local control, a new device, the cavity-microscope, was crea ...

EPFL2024

Investigation of room-temperature single-photon emitters in GaN-based materials and GaN/AlN quantum dots

Johann Nicolaï Stachurski

Over the past decade, quantum photonics platforms aiming at harnessing the fundamental properties of single particles, such as quantum superposition and quantum entanglement, have flourished. In this context, single-photon emitters capable of operating at ...

EPFL2024

Ion-Dipole Interaction Enabling Highly Efficient CsPbI3 Perovskite Indoor Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Haizhou Lu

Metal halide perovskites are ideal candidates for indoor photovoltaics (IPVs) because of their easy-to-adjust bandgaps, which can be designed to cover the spectrum of any artificial light source. However, the serious non-radiative carrier recombination und ...

Wiley-V C H Verlag Gmbh2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

The mesoglea buffers the physico-chemical microenvironment of photosymbionts in the upside-down jellyfish Cassiopea sp

Anders Meibom, Niclas Heidelberg Lyndby

IntroductionThe jellyfish Cassiopea has a conspicuous lifestyle, positioning itself upside-down on sediments in shallow waters thereby exposing its photosynthetic endosymbionts (Symbiodiniaceae) to light. Several studies have shown how the photosymbionts b ...

FRONTIERS MEDIA SA2023

Wideband integrated bioaerosol sensor (WIBS) excited, fluorescent, and hyper-fluorescent particle number concentrations and normalized size distributions (dN/dlogDp) measured in the Swiss container during MOSAiC 2019/2020

Julia Schmale, Ivo Fabio Beck, Margarida Teles Nogueira Rolo, Alireza Moallemi

These datasets contain the total particle number concentrations and normalized size distributions (dN/dlogDp) of excited, fluorescent, and hyper-fluorescent particles of sizes 0.5 to 20 μm (optical diameter). The normalized size distribution datasets are s ...

Zenodo2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Perceived glare from the sun behind tinted glazing: Comparing blue vs. color-neutral tints

Marilyne Andersen, Andreas Schueler, Jan Wienold, Sneha Jain, Maxime Lagier

While the influence of a glare source's spectrum on sensitivity to discomfort glare has been demonstrated repeatedly under electric light conditions, it has not yet been studied under actual daylit conditions. To investigate the influence of spectral alter ...

2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

High-efficiency non-ablative UV laser nano-scale processing of fused silica by stable filamentation

Yves Bellouard, Benedikt Hermann

Over the last decades, three-dimensional micro-manufacturing of fused silica via near-infrared ultrafast laser exposure combined with an etching step has become an established technique for producing complex three-dimensional components. Here, we explore t ...

2023

Discomfort glare from daylight: Influence of transmitted color and the eye's macular pigment

Sneha Jain

Designing architectural façades that allow sufficient daylight to create visually comfortable and pleasant environments is a challenging aspect of building design. It requires accounting for visual comfort and discomfort glare risks and understanding the f ...

EPFL2023

Photochemical Alkynylations with Hypervalent Iodine Reagents

Stephanie Grace Elizabeth Amos

Over the past twenty years, photochemical transformations have gained in importance in organic chemistry. Indeed, the development of photocatalysts has allowed the use of visible light as an energy source for chemical transformations. More specifically, ph ...

EPFL2022

Effects of illuminance intensity on the green channel of remote photoplethysmography (rPPG) signals

Ata Jedari Golparvar

Point-of-care remote photoplethysmography (rPPG) devices that utilize low-cost RGB cameras have drawn considerable attention due to their convenience in contactless and non-invasive vital signs monitoring. In rPPG, sufficient lighting conditions are essent ...

SPRINGER2022

Visual comfort without borders: Extending daylight glare prediction to dim daylit environments

Geraldine Cai Ting Quek

Avoiding discomfort glare is one of the critical aspects of maintaining visual comfort, which significantly influences occupants' overall satisfaction with their indoor environment. Discomfort glare prediction models have been developed for various lightin ...

EPFL2022

Separation and Recycling Potential of Rare Earth Elements from Energy Systems: Feed and Economic Viability Review

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil

This review explores the potential of separating and recycling rare earth elements (REEs) from different energy conversion systems, such as wind turbines, electric vehicles batteries, or lighting devices. The REEs include 17 elements (with global productio ...

2022

Optical Diffraction Tomography Using Nearly In-Line Holography with a Broadband LED Source

Demetri Psaltis, Abhijit Roy

We present optical tomography methods for a 3D refractive index reconstruction of weakly scattering objects using LED light sources. We are able to record holograms by minimizing the optical path difference between the signal and reference beams while sepa ...

MDPI2022