Publications related to Tuning Interaction Parameters of Thermoplastic Polyurethanes in a Binary Solvent To Achieve Precise Control over Microphase Separation

Related publications (29)

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Palladium-based supramolecular assemblies: from complex structures to water-soluble anion-receptors

Sylvain Alexandre Marie Sudan

The combination of palladium salts and bipyridyl ligands can lead to the formation of a large variety of coordination complexes, with different shapes and sizes, displaying a very versatile host-guest chemistry. Increasing their structural complexity remai ...

EPFL2024

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Predicting Transformation Products during Aqueous Oxidation Processes: Current State and Outlook

Urs von Gunten

Water quality and its impacts on human and ecosystem health presents tremendous global challenges. While oxidative water treatment can solve many of these problems related to hygiene and micropollutants, identifying and predicting transformation products f ...

2023

Scalable angular spectrum propagation

Felix Wechsler

Coherent field propagation is an essential computational tool in optics with applications ranging from computational optics and optical design to iterative field reconstructions. An improvement in the computational speed of current propagation methods is t ...

Optica Publishing Group2023

Euclid: Cosmology forecasts from the void-galaxy cross-correlation function with reconstruction

Frédéric Courbin, Georges Meylan

We have investigated the cosmological constraints that can be expected from measurement of the cross-correlation of galaxies with cosmic voids identified in the Euclid spectroscopic survey, which will include spectroscopic information for tens of millions ...

EDP SCIENCES S A2023

Spatiotemporal Metabolic Liver Zonation and Consequences on Pathophysiology

Felix Naef, Tomaz Martini

Hepatocytes are the main workers in the hepatic factory, managing metabolism of nutrients and xenobiotics, production and recycling of proteins, and glucose and lipid homeostasis. Division of labor between hepatocytes is critical to coordinate complex comp ...

ANNUAL REVIEWS2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

Ludger Weber, Manoj Kondibhau Naikade

A relation for an adequate pore fraction needed to obtain residual Si and C free composites via reactive Si-X alloy infiltration is presented. The volume ratio of SiC and carbonaceous phase, the composition of the infiltrating liquid and the apparent densi ...

ELSEVIER SCI LTD2022

Anchorage of shear reinforcement in beams and slabs

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu, Frédéric Monney

Anchorage of shear reinforcement, such as links or stirrups, can be performed by providing hooks, bends or heads at their ends, by welding transverse reinforcement or by closing open stirrups with pins. Hooks and bends, also used to enhance the anchorage o ...

2022

Latent Mechanisms of Polarization Switching from In Situ Electron Microscopy Observations

Vasiliki Tileli, Reinis Ignatans

In situ scanning transmission electron microscopy enables observation of the domain dynamics in ferroelectric materials as a function of externally applied bias and temperature. The resultant data sets contain a wealth of information on polarization switch ...

WILEY-V C H VERLAG GMBH2022

Integrated Model for Comprehensive Digital Education Platforms

Denis Gillet, Maria Jesus Rodriguez Triana, Juan Carlos Farah, Isabelle Barbara Marie-Hélène Cardia

The trend towards generalized blended and active learning approaches in engineering education is redefining the requirements and the deployment schemes for digital education platforms. This paper presents a quadriptych techno- pedagogical model highlightin ...

IEEE2022

Nanobridge Stencil Enabling High Resolution Arbitrarily Shaped Metallic Thin Films on Various Substrates

Jürgen Brugger, Giovanni Boero, Yi-Chiang Sun

Stencil lithography (SL), which uses a perforated membrane as a reusable shadow mask to locally add material patterns on substrates provides a simple but versatile approach for the fabrication of functional devices on a large variety of substrate materials ...

Wiley2022

Development of remote C-H bond functionalization of redox-active alcohol derivatives and oxidative transformations under photoredox catalysis

Alexandre Julien Florent Leclair

The development of radical-based remote C(sp3)-H functionalizations of redox-active alcohol derivatives, oxidative cycloaddition and rearrangement transformations under visible light photocatalysis constitute the basis of this thesis. The first chapter des ...

EPFL2021

Tosyloxybenziodoxolone: A Platform for Performing the Umpolung of Alkynes in One-Pot Transformations

Jérôme Waser, Julien Aymeric Borrel

Ethynylbenziodoxolones (EBXs) are commonly encountered reagents for the electrophilic alkynylation of nucleophiles. Herein, we report a one-pot, two-step process for EBX generation and their direct application in substrate functionalization. Our approach e ...

2021

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Comparing performance of discomfort glare metrics in high and low adaptation levels

Marilyne Andersen, Jan Wienold, Mandana Sarey Khanie, Geraldine Cai Ting Quek

Current discomfort glare prediction metrics usually account for at least one of the two categories of effects that induce discomfort glare – the saturation and contrast effects. Saturation-driven metrics (overall illuminance on the eye) are suited for brig ...

2021

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Benefiting From Bicubically Down-Sampled Images for Learning Real-World Image Super-Resolution

Jean-Philippe Thiran, Seyedbehzad Bozorgtabar, Thomas Yu, Claudiu-Cristian Musat, Mohammad Saeed Rad, Hazim Kemal Ekenel

Super-resolution (SR) has traditionally been based on pairs of high-resolution images (HR) and their low-resolution (LR) counterparts obtained artificially with bicubic downsampling. However, in real-world SR, there is a large variety of realistic image de ...

2021