Publications related to A combined radial collimator and cooled beryllium filter for neutron scattering

Related publications (32)

High brightness neutron source optimized for very high pulsed magnetic field experiments

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

Magnetic structure and magnetoelectric properties of the spin-flop phase in LiFePO4

Paola Caterina Forino, Ellen Fogh, Sofie Janas

We investigate the magnetic structure and magnetoelectric(ME) effect in the high -field phase of the antiferromagnet LiFePO 4 above the critical field of 31 T. A neutron diffraction study in pulsed magnetic fields reveals the propagation vector to be q = 0 ...

Amer Physical Soc2024

Commissioning of the novel Continuous Angle Multi-energy Analysis spectrometer at the Paul Scherrer Institut

Henrik Moodysson Rønnow, Felix Groitl, Jakob Lass

We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (Continuous Angle Multi -Energy Analysis) at the Swiss Spallation Neutron Source at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for efficie ...

AIP Publishing2023

Anomalous Hall effect and magnetic structure of the topological semimetal (Mn0.78Fe0.22)3Ge

Jian Rui Soh, Jan Persson

Me3+8Ge, being a Weyl semimetal, shows a large anomalous Hall effect (AHE), which decreases slowly with an increase in 8 from 0.1 to 0.4. However, AHE in this compound remains significantly large in the whole range of 8 because of the robust nature of the ...

AMER PHYSICAL SOC2023

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Device Performance of Emerging Photovoltaic Materials (Version 4)

Mohammad Khaja Nazeeruddin, Tor Jesper Jacobsson, Fei Guo

Following the 3rd release of the "Emerging PV reports", the best achievements in the performance of emerging photovoltaic (e-PV) devices in diverse e-PV research subjects are summarized, as reported in peer-reviewed articles in academic journals since Augu ...

Wiley-V C H Verlag Gmbh2023

Investigating field-induced magnetic order in Han purple by neutron scattering up to 25.9 T

Frédéric Mila, Philippe Heller, Bruce Normand

BaCuSi2O6 is a quasi-two-dimensional (2D) quantum antiferromagnet containing three different types of stacked, square-lattice bilayer hosting spin-1/2 dimers. Although this compound has been studied extensively over the last two decades, the critical appli ...

2022

Real space and reciprocal space investigations of the spin dynamics in skyrmion-hosting materials

Le Yu

Magnetic skyrmions are whirl-like spin configurations with particle-like properties protected by non-trivial topology. Due to their unique spin structures and dynamical properties, they have attracted tremendous interests over the past decade, from fundame ...

EPFL2022

Effect of Co-Substitution on Hydrogen Absorption and Desorption Reactions of YMgNi4-Based Alloys

Andreas Züttel, Wen Luo, Loris Giovanni Lombardo, Heena Yang

YMgNi4-based alloys exhibit reversible hydrogen absorption and desorption reactions at near room temperature. Here, we report that Co-substituted YMgNi4-based alloys exhibited higher hydrogen contents and lower hydrogen absorption and desorption reaction p ...

AMER CHEMICAL SOC2022

Bragg edge tomography characterization of additively manufactured 316L steel

Roland Logé, Christian Leinenbach, Nikola Kalentics

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Miniature and Minimalistic Neutron Detectors for Online High-Resolution Experiments in the Zero-Power Reactor CROCUS

Fanny Vitullo

The continuous strive for more efficient and reliable nuclear power plants is leading to increasing complexity in the design and operations of reactors. As a consequence, comprehensive analyses are required to assess the reactor's safety during normal and ...

EPFL2022

Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN

Raffaele Esposito

This manuscript describes the design work and the R&D activities carried out for the third-generation neutron production target in the neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN). The facility is composed ...

EPFL2022

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

Static and dynamic properties of non-collinear quantum antiferromagnets explored by neutron scattering

Luc Testa

This thesis is devoted to the investigation of static and dynamic properties of two different sets of quantum magnets with neutron scattering techniques and the help of linear spin wave theory. Both systems are copper-based with spin-1/2, which makes them ...

EPFL2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

Roland Logé, Nicola Colonna, Raffaele Esposito

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontall ...

2021

Modeling the response of a diamond detector in the zero power reactor CROCUS

Andreas Pautz, Mathieu Hursin, Vincent Pierre Lamirand, Pavel Frajtag

The present manuscript documents the development of a practical calculation scheme to model the response of a diamond detector in the mixed (neutron and gamma) radiation field of the CROCUS experimental reactor at EPFL. The model is shown to perform reason ...

SPRINGER HEIDELBERG2021

Robust Inorganic Hole Transport Materials for Organic and Perovskite Solar Cells: Insights into Materials Electronic Properties and Device Performance

Mohammad Khaja Nazeeruddin, Antonio Abate, Tom Theodorus Antonius Lummen

Interfaces in perovskite and organic solar cells play a central role in advancing efficiency and prolong device durability. They improve charge transport/transfer from the absorber layer to the collecting electrodes, while also blocking the opposite charge ...

2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Multiphase magnetism in Yb2Ti2O7

Gregory Scott Tucker

We use neutron scattering to show that ferromagnetism and antiferromagnetism coexist in the low T state of the pyrochlore quantum magnet Yb2Ti2O7. While magnetic Bragg peaks evidence long-range static ferromagnetic order, inelastic scattering shows that sh ...

National Academy of Sciences2020

Design of the third-generation neutron spallation target for the CERN's n_TOF facility

Raffaele Esposito

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, ...

IOS PRESS2020