Publications related to Mechanical and electrochemical deterioration mechanisms in the tribocorrosion of Al alloys in NaCl and in NaNO3 solutions

Related publications (31)

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, Jaemin Kim, James Alec Pierce Bourely

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Influence of outdoor air pollution on European residential ventilative cooling potential

Dusan Licina, Evangelos Belias

Residential ventilative cooling via natural ventilation is influenced by outdoor air pollution. However, relative to climate, outdoor air pollution is not comprehensively considered in determining the ventilative cooling potential of buildings. To assess t ...

ELSEVIER SCIENCE SA2023

Transparent structured conductive coating for applications in smart windows

Jérémy Jacques Antonin Fleury

Solar radiation reaching the surface of the earth for a period of one hour contains more energy than that consumed by mankind over an entire year. Some of this solar energy is already collected by photovoltaic cells to cover the electricity needs of buildi ...

EPFL2023

Characterization and Development of Fired Passivating Contacts for Silicon Solar Cells

Mario Joe Lehmann

One of the key elements to improve mainstream crystalline silicon (c-Si) solar cell performance is surface passivation, which is at the center of the ongoing transition from cells with direct silicon-metal contacts to full area passivating contacts. In the ...

EPFL2022

Modulating the Reactivity of Liquid Ga Nanoparticle Inks by Modifying Their Surface Chemistry

Raffaella Buonsanti, Laia Castilla Amorós, James Richard Pankhurst

Micro- and nanosized particles of liquid metals, particularly Ga-based alloys, are attracting increasing attention for applications in several fields. The surface functionalization of Ga-based nanoparticles (NPs) with organic ligands renders easily process ...

2022

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Microscale Liquid Metal Conductors for Stretchable and Transparent Electronics

Stéphanie Lacour, Giuseppe Schiavone, Ivan Furfaro, Laurent Mirko Dejace, Haotian Chen

Integrated wearable electronics capable of transducing and transmitting biophysical information on complex and dynamic systems are attracting high interest across the consumer electronics, clinical, and research domains. Gallium and gallium-based liquid me ...

Wiley2021

System-level Design of Adaptive Wearable Sensors for Health and Wellness Monitoring

Elisabetta De Giovanni

In recent years, population aging and the consequent higher incidence of noncommunicable diseases, have increased the need for long-term health monitoring. Moreover, as healthcare cost is projected to grow substantially by 2030 in OECD countries, the deman ...

EPFL2021

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Influence of Bovine Serum Albumin (BSA) on the Tribocorrosion Behaviour of a Low Carbon CoCrMo Alloy in Simulated Body Fluids

Stefano Mischler, Shoufan Cao

Tribocorrosion, as the interaction between mechanical wear and electrochemical corrosion, has been found to be the main problem causing the failure and limiting the lifetime of metal-on-metal artificial hip joints. Better understanding of the tribocorrosio ...

2020

Tensile response of textile reinforced concrete

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Textile Reinforced Concrete (TRC) is a cementitious composite material where a carbon or glass fabric is embedded as reinforcement. The use of TRC allows building thin and light structures, with reduced concrete covers and an enhanced durability due to the ...

2020

Tribocorrosion behaviour of pure titanium in bovine serum albumin solution: A multiscale study

Anna Neus Igual Muñoz

Tribocorrosion behaviour of pure titanium in phosphate buffer saline (PBS) solution has been investigated systematically as a function of surface chemistry and bovine serum albumin (BSA) content in the solution. A ball-on-disk tribometer coupled with an el ...

ELSEVIER2020

Tribological properties of gold matrix composite coatings with carbon nanocapsules containing ionic liquid lubricants

Stefano Mischler, Anna Neus Igual Muñoz

Self-lubricating, gold matrix composite coatings were produced by electrochemical codeposition of carbon nanocapsules filled with ionic liquid (IL) from a colloidal galvanic bath on a nickel electrode. The tribological response of the composite coatings wa ...

ELSEVIER2020

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020

Gradient band structure: high performance perovskite solar cells using poly(bisphenol A anhydride-co-1,3-phenylenediamine)

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Sanghyun Paek, Cristina Roldán Carmona, Aron Joel Huckaba, Albertus Adrian Sutanto, Hobeom Kim, Maria Cristina Momblona Rincón, Nadja Isabelle Desiree Klipfel, Mousa Abdulla M E Abuhelaiqa

Surface passivation is a critical factor for improving the photovoltaic performance of perovskite solar cells. However, more robust principle investigations are required to build effective passivation strategies enabling high-performance perovskite solar c ...

Royal Society of Chemistry2020

Defect Passivation via the Incorporation of Tetrapropylammonium Cation Leading to Stability Enhancement in Lead Halide Perovskite

Anurag Krishna

Improving the performances of photovoltaic (PV) devices by suppressing nonradiative energy losses through surface defect passivation and enhancing the stability to the level of standard PV represents one critical challenge for perovskite solar cells. Here, ...

WILEY-V C H VERLAG GMBH2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020