Publications related to Elastomer based tunable optofluidic devices

Related publications (22)

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Corentin Jean Dominique Fivet, Stefana Parascho, Maxence Grangeot, Qianqing Wang

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Corentin Jean Dominique Fivet, Numa Joy Bertola, Maléna Bastien Masse, Célia Marine Küpfer

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Reusability Assessment of Obsolete Reinforced Concrete Structural Components

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes

The production of concrete, the most widely used construction material, detrimentally affects the environment. Obsolete reinforced concrete (RC) load-bearing structures, even when still in good condition, are today prematurely crushed and landfilled or rec ...

Springer2023

Design of New Low-Carbon Floor Systems by Reusing Cut Cast-in-Place Concrete Pieces

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

As floors typically account for the largest share of a building embodied carbon footprint, new strategies to build low-carbon floors must be developed and implemented. Among these strategies, the reuse of existing components is a promising circular approac ...

Novus Press2023

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

Low-tech methods for the reuse of reinforced concrete structural elements

Nicole Widmer, Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

Most of existing buildings are made of concrete, new buildings are being built with it and others are demolished when still in good structural condition. This drives increased demands for raw materials, greenhouse gas emissions, and an accumulation of demo ...

2023

From Marshall Plan to “Hilton in the wild”: The Transnational History of a Cooperative Housing Block in Esat, Ankara

Sila Karatas

This paper concerns the planning, design, and construction history of a postwar multifamily housing block in Ankara, Turkey, viewed from the perspective of the transnational and local networks behind its realization. Built by the Mintrak Building Cooperati ...

2022

A Collaborative Workflow to Automate the Design, Analysis, and Construction of Integrally-Attached Timber Plate Structures

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper introduces a computational framework that fosters collaboration between architects, engineers, and contractors by bridging the gap between architectural design, structural analysis, and digital construction. The present research is oriented towa ...

CAADRIA2022

Interlaboratory Test Program to Determine the Precision of the R3 Test Method (ASTM C1897-20) for Measuring Reactivity of Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, Diana Londoño Zuluaga

The substitution of portland clinker by supplementary cementitious materials (SCMs) is one of the main avenues for the further decarbonization of cement production. To secure future SCM supplies, generic and performance-related test methods for SCMs are re ...

AMER SOC TESTING MATERIALS2022

Digital twins for post-earthquake damage assessment of free-standing buildings including damage information

Katrin Beyer, Radhakrishna Achanta, Bryan German Pantoja Rosero, Amir Rezaie

We present a pipeline for the automatic generation of digital twins of free-standing buildings for damage assessment. Our method takes multiple view images of the target building as input and processes them to produce a 3D model in levels of detail (LOD) f ...

2022

Environmental and economic analysis of new construction techniques reusing existing concrete elements: two case studies

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes

As the most widely used construction material worldwide, concrete is the main cause of greenhouse gas emissions, material depletion, and waste generation by the construction industry. Typically, concrete waste is crushed and, at best, reclaimed into recycl ...

2022

Shape programmable multi-stable polymer actuators

Bekir Aksoy

Recent advances in soft actuators have enabled systems that are safer to interact with, better at handling fragile objects, able to produce complex shapes with fewer components. However, being inherently soft differs these actuators from their rigid counte ...

EPFL2021

Upcycling Space Structures (Preface to special issue)

Corentin Jean Dominique Fivet

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021

Structural design methodology in Integrally-Attached Timber Plate structures

Aryan Rezaei Rad, Petras Vestartas

The immediate application of research discoveries requires a global and exact understanding of the structure under consideration. To gain insight into the complex behavior of structures, numerical simulations are carried out in parallel to physical experim ...

Routledge, Taylor & Francis Group2021

A High Efficiency Pneumatic Drive System Using Vane-Type Semi-Rotary Actuators

Alfred Rufer

A compressed air driven generator is proposed, where the pneumatic energy is converted into mechanical energy using two vane-type rotational actuators. The use of a second actuator with a higher displacement in order to produce a thermodynamic expansion al ...

UNIV NIS2021

Closed-Loop Position Control of a Self-Sensing 3-DoF Origami Module With Pneumatic Actuators

Jamie Paik, Mustafa Mete

This letter presents closed-loop position control of a pneumatically actuated modular robotic platform "pneumagami" that can be stacked to enlarge work and design space for wearable applications. The module is a 3 degrees of freedom (DoF) parallel robot wi ...

2021

Case-Study on the Creep Behavior of Interconnected Timber Elements using Wood-Wood Connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet, Martin Thomas Nakad

With the increasing use of automation and computer-aided manufacturing in timber construction, a standardized timber construction system using digitally produced wood-wood connections has recently been developed for basic building components. Its structura ...

EPFL2021

A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers

Jamie Paik, Zhenishbek Zhakypov, Jian-Lin Huang

This paper presents the proof-of-concept for a 4D printed active compliant hinge with a selectively variable stiffness for the deployment and reorientation of satellite appendages. We use 4D printing to create an active compliant hinge capable of bending t ...

IOP PUBLISHING LTD2021

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Design and control of a prototype structure that adapts to loading through large shape changes

Ian Smith, Gennaro Senatore, Arka Prabhata Reksowardojo

This paper reports on experimental testing that was carried out on a prototype adaptive structure designed to counteract the effect of loading through controlled large shape changes. The prototype is 6.6 m truss equipped with 12 linear actuators which has ...

ELSEVIER2020