Publications related to A critical assessment of experimental investigation of dynamic recrystallization of metallic materials

Related publications (39)

Performance Enhancement of Austenitic Stainless Steels Based on the Adjustment of Grain Size by Reversion, Recrystallization, and Grain Growth

The effects of grain size on the properties of AISI 304L and 316L stainless steels were critically discussed. Different grain sizes of 0.5, 2.7, 5.6, 15, 34, 90, and 192 mu m were obtained via cold rolling followed by reversion, recrystallization, and grai ...

WILEY-V C H VERLAG GMBH2025

Phase formation and texture evolution in 316L-CuCrZr multi-material structures fabricated by laser powder bed fusion

Christian Leinenbach, Johann Michler, Antonios Nikolaos Baganis

Steel-copper multi-material structures produced via Additive Manufacturing pose challenges in laser co-processing and microstructural control. This work employs neutron imaging, Electron Backscatter Diffraction (EBSD), and Energy Dispersive Spectroscopy (E ...

2025

Lattice bond chains administer kink anisotropy and inform strategies of theophylline crystal self-healing

Georg Fantner

How molecular-level understanding of the crystal growth mechanisms and their relation to lattice bonds informs the rational design of crystals with desired shapes and properties has remained elusive. Here we employ theophylline crystals and drive them into ...

2025

Deciphering necking in granular materials: Micromechanical insights into sand behavior during cycles of triaxial compression and extension

Edward Carlo Giorgio Andò, Konstantinos Karapiperis

This study elucidates the fundamental governing mechanisms behind necking instability in granular materials, a phenomenon extensively documented in the literature yet lacking a clear explanation of its underlying causes. Our findings suggest that the pheno ...

2025

Microstructured Soft Materials

Alexandra Thoma

Many biological materials possess well-defined structures across many length scales and exhibit combinations of mechanical properties that remain unmatched in synthetic materials. Such an example of a biological material is the marine mussel byssus, which ...

EPFL2024

Insights from an extensive triaxial testing campaign on a shale for comparative site characterization of a deep geological repository

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Several boreholes were drilled for site comparison of a deep geological repository (DGR) in Northern Switzerland. The main target of the exploration program was the >100m thick Opalinus Clay, the designated host rock encountered at approximately 450 to 100 ...

Elsevier2024

Crack Arresting Strategies for Wind Turbine Blade Adhesive Joints

Dharun Vadugappatty Srinivasan

The wind energy sector has achieved significant milestones driven by rapid industrialization and the adoption of larger wind turbine rotor blades. These blades, manufactured with thick composite shells and spars, rely on adhesive bonding technology for ass ...

EPFL2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Structural phase transition in NH₄F under extreme pressure conditions

Richard Gaal

Ammonium fluoride (NH₄F) exhibits a variety of crystalline phases depending on temperature and pressure. By employing Raman spectroscopy and synchrotron X-ray diffraction beyond megabar pressures (up to 140 GPa), we have here observed a novel dense solid p ...

2024

Deformation mechanisms of primary ?? precipitates in nickel-based superalloy

Roland Logé

Coarse gamma ' precipitates with ordered structure (i.e. primary gamma ' precipitates) residing on grain boundaries in nickelbased superalloys are generally considered to be non-deformable, they are thus being tailored to restrict grain growth during hot d ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy

Roland Logé, Cyril Cayron, Aryan Rezaei Rad

Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal channel angular pressing (ECAP) were employed to process an extruded Mg -6Gd -3Y -1.5Ag (wt%) alloy at 553 K for 1, 2, 4 and 6 passes. The microstructural evolutions ...

KEAI PUBLISHING LTD2023

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Roland Logé, Christian Leinenbach

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

Observation of a Plastic Crystal in Water-Ammonia Mixtures under High Pressure and Temperature

Livia Eleonora Bove Kado

Solid mixtures of ammonia and water, the so-called ammonia hydrates, are thought to be major components of solar and extra-solar icy planets. We present here a thorough characterization of the recently reported high pressure (P)-temperature (T) phase VII o ...

AMER CHEMICAL SOC2023

FEM of stress partition during compression of WC-10 wt.% Co with realistic 3D morphology

Daniele Mari, Lucas Eric Jacques Degeneve

A Finite Element Model is developed to represent the mechanical behavior of WC-10 wt.% Co in compression tests. In this research, realistic three-dimensional model is obtained by slicing a sample by Focused Ion Beam and reconstituting it, resulting in two ...

ELSEVIER SCI LTD2022

Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects

Nicolò Maria Della Ventura

The project aims to validate some recent theoretical developments on the deformation twinning nucleation mechanism in HCP metals through small-scale mechanic experiments. To this end, a systematic investigation of the mechanical response of pure magnesium ...

EPFL2022

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Jonas De Jesus Diaz Gomez

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

EPFL2023

From kirigami to hydrogels: a tutorial on designing conformally transformable surfaces

Yingying Ren, Tian Chen

Elastic surfaces that morph between multiple geometrical configurations are of significant engineering value, with applications ranging from the deployment of space-based PV arrays, the erection of temporary shelters, and the realization of flexible displa ...

2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022