Publications related to Ultrawide bandwidth wavelength monitor based on a pair of tilted fiber Bragg gratings

Related publications (30)

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Parametric Wavelength Conversion in Waveguiding Structures: Efficiency, Bandwidth and Polarization

Arman Ayan

Photonics integrated circuits are a promising solution for the growing demands of data transmission and future system-on-chip technologies. Within this context, nonlinear optical interactions offer unique opportunities for all-optical processing, sampling, ...

EPFL2024

Alignment of ND3 molecules in dc-electric fields

Andreas Osterwalder, Junwen Zou, Viet Le Duc

The control of movement and orientation of gas-phase molecules has become the focus of many research areas in molecular physics. Here, ND3 molecules are polarized in a segmented, curved electrostatic guide and adiabatically aligned inside a rotatable mass ...

Aip Publishing2024

Wavelength-stabilized figure-of-9 thulium-doped all-fiber laser emitting 560 fs pulses

Camille Sophie Brès, Moritz Bartnick, Gayathri Bharathan

We demonstrate a figure-of-9 all-fiber thulium-doped laser (TDFL) that generates 560 fs long pulses at 1948 nm wavelength. In order to achieve self-starting passive mode-locking, we utilize an in-fiber Faraday rotator to induce a nonreciprocal phase shift. ...

Iop Publishing Ltd2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Dissipative Kerr soliton generation at 2μm in a silicon nitride microresonator

Camille Sophie Brès, Marco Clementi, Ozan Yakar, Anton Stroganov, Christian André Clément Lafforgue

Chip -scale optical frequency combs enable the generation of highly -coherent pulsed light at gigahertz-level repetition rates, with potential technological impact ranging from telecommunications to sensing and spectroscopy. In combination with techniques ...

Optica Publishing Group2024

Polarization-enhanced GaN Schottky barrier diodes: Ultra-thin InGaN for high breakdown voltage and low Ron

Elison de Nazareth Matioli, Alessandro Floriduz, Zheng Hao

In this work, we present a concept that leverages the strong piezoelectric polarization field in InGaN, which counteracts the external electric field at reverse bias. We show that despite the smaller InGaN band-gap and lower critical electric field, its st ...

2024

Nonlinear optical diode effect in a magnetic Weyl semimetal

Philip Johannes Walter Moll, Chunyu Guo

Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically co ...

Nature Portfolio2024

Measuring electrical properties in semiconductor devices by pixelated STEM and off-axis electron holography (or convergent beams vs. plane waves)

Victor Carle Adrien Boureau

We demonstrate the use of both pixelated differential phase contrast (DPC) scanning transmission electron microscopy (STEM) and off-axis electron holography (EH) for the measurement of electric fields and assess the advantages and limitations of each techn ...

Pergamon-Elsevier Science Ltd2024

Silicon nitride electric-field poled microresonator modulator

Camille Sophie Brès, Edgars Nitiss, Boris Zabelich, Anton Stroganov, Christian André Clément Lafforgue

Stoichiometric silicon nitride is a highly regarded platform for its favorable attributes, such as low propagation loss and compatibility with complementary metal-oxide-semiconductor technology, making it a prominent choice for various linear and nonlinear ...

2024

On the interaction of femtosecond laser pulses with layered dielectric materials

Ruben Ricca

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

Progress and prospects in nonlinear extreme-ultraviolet and X-ray optics and spectroscopy

Majed Chergui

Free-electron lasers and high-harmonic-generation table-top systems are new sources of extreme-ultraviolet to hard X-ray photons, providing ultrashort pulses that are intense, coherent and tunable. They are enabling a broad range of nonlinear optical and s ...

NATURE PORTFOLIO2023

Analysis of Non-Canonical Body-Conformal Arrays with Polarization Decomposition

Anja Skrivervik, Denys Nikolayev

Conformal phased arrays can be found in many applications due to their ability to fit tridimensional surfaces and, thanks to their scanning performance, can excel planar arrays. However, most of the previously proposed analysis methods can be applied only ...

IEEE2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

Method for operating a frequency agile tunable self-injection locking laser system and self-injection locking laser system

Tobias Kippenberg, Johann Emmeram Riemensberger, Anat Siddharth, Grigorii Likhachev

The invention relates to a Method for operating a frequency agile tunable self-injection locking laser system being formed by a laser device coupled to at least one optical resonator, wherein a diode current of a laser diode of the laser device is controll ...

2023

All-glass miniature GHz repetition rate femtosecond laser cavity

Yves Bellouard, Saood Ibni Nazir, Antoine Maxime Delgoffe, Sargis Hakobyan

Free-space optics allows for design freedom and control, but miniaturization and manufacturability are limited. Here, we present a method for manufacturing complex miniaturized free-space optical systems that combines contactless femtosecond laser-activate ...

2023

Exploring Novel Modalities for Optical Diffraction Tomography

Amirhossein Saba Shirvan

In the past decade, optical diffraction tomography has gained a lot of attention for its ability to create label-free three-dimensional (3D) images of the refractive index distribution of biological samples using scattered fields measured through holograph ...

EPFL2023

Hybrid lithium niobate-on-silicon nitride platform for mid-IR supercontinuum generation

Tobias Kippenberg, Mikhail Churaev

Integrated optics has shown itself very convenient for exploiting nonlinear processes as it results in high confinement factor, freedom of dispersion engineering and compactness. However, the choice of materials is crucial for the development of nonlinear ...

SPIE-INT SOC OPTICAL ENGINEERING2023

Cavitation induced by pulsed and continuous-wave fiber lasers in confinement

Christophe Moser, Jan Krizek

Bubbles generated with lasers in liquids under confinement have been investigated for their potential use as the driving mechanism for liquid micro-jets in various microfluidic devices, such as needle-free jet injectors. Here, we report on the study of bub ...

ELSEVIER SCIENCE INC2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023