Publications related to Tribocorrosion of a CoCrMo alloy in sulfuric acid - Glycerol mixtures

Related publications (35)

A story of two transitions: From adhesive to abrasive wear and from ductile to brittle regime

Jean-François Molinari, Sacha Zenon Wattel

Atomistic simulations performed with a family of model potential with tunable hardness have proven to be a great tool for advancing the understanding of wear processes at the asperity level. They have been instrumental in finding a critical length scale, w ...

2024

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024

Adaptive Robust Data-Driven Building Control via Bilevel Reformulation: An Experimental Result

Colin Neil Jones, Yingzhao Lian, Jicheng Shi, Manuel Pascal Koch

Data-driven control approaches for the minimization of energy consumption of buildings have the potential to significantly reduce deployment costs and increase the uptake of advanced control in this sector. A number of recent approaches based on the applic ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

The nature of carbon deposits and their formation pathways during catalytic supercritical water gasification of glycerol

Christopher Marc Hunston

Supercritical water gasification (SCWG) is a promising technology to convert wet biomass to renewable natural gas. The present study sheds light on the chemical composition and the formation mechanism of coke deposits on a Ru/CNF catalyst during continuous ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2023

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Iodine oxoacids enhance nucleation of sulfuric acid particles in the atmosphere

Mihnea Surdu, Andrea Baccarini, Lubna Dada

The main nucleating vapor in the atmosphere is thought to be sulfuric acid (H2SO4), stabilized by ammonia (NH3). However, in marine and polar regions, NH3 is generally low, and H2SO4 is frequently found together with iodine oxoacids [HIOx, i.e., iodic acid ...

American Association for the Advancement of Science2023

Practice of Streaming Processing of Dynamic Graphs: Concepts, Models, and Systems

Mikhail Kapralov

Graphs processing has become an important part of various areas of computing, including machine learning, medical applications, social network analysis, computational sciences, and others. A growing amount of the associated graph processing workloads are d ...

2023

Deep transfer learning of additive manufacturing mechanisms across materials in metal-based laser powder bed fusion process

Roland Logé, Rita Drissi Daoudi

The defective regimes in metal-based Laser Powder Bed Fusion (LPBF) processes can be minimized by deploying in-situ monitoring strategies comprising Machine learning (ML) algorithms and sensing techniques. So far, algorithms trained for monitoring a partic ...

ELSEVIER SCIENCE SA2022

Effect of Y2O3 dispersoids on microstructure and creep properties of Hastelloy X processed by laser powder-bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) was used to consolidate powders of a Ni-Cr-Fe-Mo alloy (Hastelloy X) blended with 1 wt% Y2O3 nanometric powders. The nearly-dense, crack-free specimens, with and without oxide dispersion strengthening (ODS), exhibit high-aspe ...

ELSEVIER2022

Steel Sheet Sheathed Cold-Formed Steel Framed In-line Wall Systems. II: Impact of Nonstructural Detailing

Fani Derveni

Although cold-formed steel (CFS) framing systems have the potential to support the need for resilient housing, the use of CFS has been restricted due to gaps in understanding its structural behavior and by the limited guidelines provided in design standard ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

Low-damage steel structures for enhanced life-cycle seismic performance

Dimitrios Lignos, Martina Paronesso

During an earthquake, steel frame buildings with bracings are prone to high absolute floor acceleration demands, thereby causing damage to acceleration-sensitive non-structural elements and building content. Inelastic deformations in steel bracings and/or ...

ERNST & SOHN2022

Poisoning Effects of Cerium Oxide (CeO2) on the Performance of Proton Exchange Membrane Fuel Cells (PEMFCs)

Jan Van Herle, Hossein Pourrahmani

In this study, the poisoning effects of cerium oxide (CeO2) as the contaminant on the performance of proton exchange membrane fuel cells (PEMFCs) are evaluated. An experimental setup was developed to analyze the performance characteristic (I-V) curves in c ...

MDPI2022

Investigation of new particle formation mechanisms and aerosol processes at Marambio Station, Antarctic Peninsula

Lubna Dada

Understanding chemical processes leading to the formation of atmospheric aerosol particles is crucial to improve our capabilities in predicting the future climate. However, those mechanisms are still inadequately characterized, especially in polar regions. ...

Copernicus GmbH2022

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Tobias Brink, Enrico Milanese

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Adhesive wear regimes on rough surfaces and interaction of micro-contacts

Jean-François Molinari, Son-Jonathan Pham-Ba

We develop an analytical model of adhesive wear between two unlubricated rough surfaces, forming micro-contacts under normal load. The model is based on an energy balance and a crack initiation criteria. We apply the model to the problem of self-affine rou ...

2021

An evaluation of new particle formation events in Helsinki during a Baltic Sea cyanobacterial summer bloom

Lubna Dada

Several studies have investigated new particle formation (NPF) events from various sites ranging from pristine locations, including forest sites, to urban areas. However, there is still a dearth of studies investigating NPF processes and subsequent aerosol ...

Copernicus GmbH2022

Low‐Volatility Vapors and New Particle Formation Over the Southern Ocean During the Antarctic Circumnavigation Expedition

Julia Schmale, Andrea Baccarini, Robin Lewis Modini

During summer, the Southern Ocean is largely unaffected by anthropogenic emissions, which makes this region an ideal place to investigate marine natural aerosol sources and processes. A better understanding of natural aerosol is key to constrain the preind ...

2021

Stability and Unbalance Analysis of Rigid Rotors Supported by Spiral Groove Bearings: Comparison of Different Approaches

Jürg Alexander Schiffmann, Elia Iseli

The dynamic behavior of spiral-grooved gas bearing supported four degrees-of-freedom (DOF) rotors is investigated by means of linearized bearing force coefficients and full time-integrated transient analysis. The transient method consists of a state-space ...

2021