Microstructural degradation of silicon electrodes during lithiation observed via operando X-ray tomographic imaging

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lith ...

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

The sustainable development of rechargeable aqueous zinc-ion batteries (RZIBs) is severely limited by the uncontrolled zinc dendritic growth and side reactions on the anode. Herein, a lignocellulose nanofiber (LCNF) separator from waste palm with dual-func ...

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

Nickel foam substrates are frequently utilised as porous 3D substrates for renewable energy applications. The preparation of these substrates usually includes an acid-washing step, but the degree to which this step affects the final electrochemical perform ...

The structural properties of octahedral sites (B-Oh) in spinel oxides (AB(2)O(4)) play vital roles in the electrochemical performance of oxygen-related reactions. However, the precise manipulation of AB(2)O(4) remains challenging due to the complexity of t ...

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Continuous dendrites growth, as well as corrosion and side reactions of Zn metal anode seriously hinder the development of aqueous zinc ion batteries. To address these issues, oleic acid (OA) is dispersed into a 2 M ZnSO4 solution to form a novel colloidal ...

Poor cycling stability and low volumetric capacity of sulfur cathode prevents practical application of Lithium-sulfur (Li-S) batteries. Herein, we demonstrate a strategy to address the two drawbacks of sulfur cathode by synthesizing a compact and flexible ...

Lithium-ion batteries with enhanced rate performance are of crucial importance for practical applications. Extensive studies on the structural design and surface modification of electrode materials with the aim of improving the rate performance have been r ...

Sodium-nickel-chloride batteries have a proven track record for backup power applications, but also show great potential for large-scale stationary electricity storage currently dominated by lithium-ion batteries. While lithium-ion cells rely on critical c ...

Sodium-metal chloride batteries are considered a sustainable and safe alternative to lithium-ion batteries for large-scale stationary electricity storage, but exhibit disadvantages in rate capability. Several studies identify metal-ion migration through th ...

Titanium dioxide of bronze phase (TiO2(B)) has attracted considerable attention as a promising alternative lithium/sodium-ion battery anode due to its excellent operation safety, good reversible capacity, and environmental friendliness. However, several in ...

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

Solving the dendrite growth problem is critical for the development of lithium metal anode for high-capacity batteries. In this work, a machine learning force field model in combination with a self-consistent continuum solvation model is used to simulate t ...

Incorporation of Mo into pure WO3 thin films is of interest for electrochromic devices, as it improves colour neutrality in the dark state. Existing literature still lacks reliable quantitative data on the complex dielectric function of such coatings. In t ...

Electric vehicles (EVs) have gained widespread attention in recent years as the dominant strategy for curbing CO2 emissions through transport electrification. Lithium-ion batteries (LIBs) are currently the most suitable and almost exclusively employed ener ...

Prompt development of electronic devices and sensors raised the requirement for design/fabrication of advanced energy sources capable of providing considerable amount of energy for consuming platforms through practical nanotechnological approaches. For thi ...

Electrochromic windows allow for an improved management of solar heat gains in buildings and enhanced visual comfort of building users. All-solid-state electrochromic devices can be especially durable. During their fabrication lithium has to be inserted, p ...

Microstructural degradation of silicon electrodes during lithiation observed via operando X-ray tomographic imaging

Chat with Graph Search

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Fast and Durable Lithium Storage Enabled by Tuning Entropy in Wadsley-Roth Phase Titanium Niobium Oxides

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

A water-gating and zinc-sieving lignocellulose nanofiber separator for dendrite-free rechargeable aqueous zinc ion battery

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

How Acid Washing Nickel Foam Substrates Improves the Efficiency of the Alkaline Hydrogen Evolution Reaction

Edge-Sharing Octahedrally Coordinated Ni-Fe Dual Active Sites on ZnFe2O4 for Photoelectrochemical Water Oxidation

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

A colloidal aqueous electrolyte modulated by oleic acid for durable zinc metal anode

An integrated flexible film as cathode for High-Performance Lithium-Sulfur battery

Enhanced rate performance of lithium-ion battery anodes using a cobalt-incorporated carbon conductive agent

Design guidelines for next-generation sodium-nickel-chloride batteries

Elucidating the Rate-Limiting Processes in High-Temperature Sodium-Metal Chloride Batteries

Bronze-Phase TiO2 as Anode Materials in Lithium and Sodium-Ion Batteries

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Revealing Morphology Evolution of Lithium Dendrites by Large-Scale Simulation Based on Machine Learning Force Field

Optical properties of in vacuo lithiated nanoporous WO3:Mo thin films as determined by spectroscopic ellipsometry

Towards reproducible lithium-ion battery cycling using liquid-phase transmission electron microscopy

Reinforced polypyrrole with 2D graphene flakes decorated with interconnected nickel-tungsten metal oxide complex toward superiorly stable supercapacitor

Strong coloration of nanoporous tungsten oxides by in-vacuo lithiation for all-solid-state electrochromic devices