Triode Solid Oxide Fuel Cell Operation Under Sulfur-Poisoning Conditions

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

Reducing the use of platinum group metals is crucial for the largescale deployment of proton exchange membrane (PEM) water electrolysis systems. The optimization of the cathode catalyst layer and decrease of the cathode Pt loading are usually overlooked du ...

Layered cathodes are among the most promising cathodes for high-energy-density Li-ion batteries, yet hindered by the structural degradation from both bulk strain and surface oxygen loss at high voltage (above 4.5 V). Herein, we report a pre-fatigue trainin ...

A reversible photo-electrochemical device operating under concentrated irradiation could offer a stand-alone solution for producing solar fuel (in photo-driven electrolysis mode) and power (in fuel cell mode). This strategy would present the advantage of h ...

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

Electrolyser including a reactor (2) comprising a housing (4), fluidic channels (6a, 6b, 6c) within the housing, and electrodes (16a, 16c) comprising an anode (16a) and a cathode (16c). The fluidic channels include an inter-electrode channel (6b) arranged ...

The membrane electrode assembly is the powerhouse of the anion exchange membrane water electrolyser (AEMWE), thereby placing a great importance on the associated preparation conditions. This paper investigated how annealing temperature and time impacted ac ...

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

Nanosized particles of liquid metals are emerging materials which hold promise for applications spanning from microelectronics to catalysis. Yet, the knowledge of their chemical reactivity is largely unknown. Here, we study the reactivity of liquid Ga and ...

Fast and uniform ion transport within the solid electrolyte interphase (SEI) is considered a crucial factor for ensuring the long-term stability of metal electrodes. In this study, we present the fabrication of ultrathin artificial interphases consisting o ...

The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

The intrinsic stability of the 5 V LiCoPO4-LiCo2P3O10 thin-film (carbon-free) cathode material coated with MoO3 thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with firstprinciple calculations. The at ...

Sodium-ion batteries (SIBs) have developed rapidly owing to the high natural abundance, wide distribution, and low cost of sodium. Among the various materials used in SIBs, sodium superion conductor (NASICON)-based electrode materials with remarkable struc ...

Electric vehicles (EVs) have gained widespread attention in recent years as the dominant strategy for curbing CO2 emissions through transport electrification. Lithium-ion batteries (LIBs) are currently the most suitable and almost exclusively employed ener ...

The electrochemical CO2 reduction reaction (CO2RR) is envisioned to play a significant role in achieving carbon neutrality while contributing to storing renewable energies. Cu-based materials are among the most promising electrocatalysts. However, 16 diffe ...

The present invention relates to a method for inducing ground consolidation. The method comprises providing a first chamber (7) in a first hole (3) in the ground (5), and a second chamber (7) in a second hole (3) in the ground (5), the first and second cha ...

Triode Solid Oxide Fuel Cell Operation Under Sulfur-Poisoning Conditions

Chat with Graph Search

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Cathode Catalyst Layer Design in PEM Water Electrolysis toward Reduced Pt Loading and Hydrogen Crossover

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Reversible photo-electrochemical device for solar hydrogen and power generation

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Gas generating membrane-less electrolyser

Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Voltage-driven Chemical Reactions Enable the Synthesis of Tunable Liquid Ga – Metal Nanoparticles

Pure Amorphous and Ultrathin Phosphate Layer with Superior Ionic Conduction for Zinc Anode Protection

Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Energy Level Alignment at the Cobalt Phosphate/Electrolyte Interface: Intrinsic Stability vs Interfacial Chemical Reactions in 5 V Lithium Ion Batteries

Sodium Superionic Conductors (NASICONs) as Cathode Materials for Sodium-Ion Batteries

Towards reproducible lithium-ion battery cycling using liquid-phase transmission electron microscopy

Cu/Metal Oxide Hybrid Nanocrystals as Electrocatalysts for the CO2 Reduction Reaction

System and method for ground consolidation