Publications related to GaAs nanowires on Si nanopillars: towards large scale, phase-engineered arrays

Related publications (15)

Improving the operational stability of perovskite solar cells with cesium-doped graphene oxide interlayer

Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Lukas Pfeifer, Hong Zhang, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Masaud Hassan S Almalki, Rita Therisod

Perovskite solar cells (PSCs) have made great advances in terms of power conversion efficiency (PCE), yet their subpar stability continues to hinder their commercialization. The interface between the perovskite layer and the charge-carrier transporting lay ...

Elsevier2024

III-N blue-emitting epi-structures with high densities of dislocations: Fundamental mechanisms for efficiency improvement and applications

Pierre Christophe Lottigier

Since the dawn of humanity, human beings seeked to light their surroundings for their well-being, security and development. The efficiency of ancient lighting devices, e.g. oil lamps or candles, was in the order of 0.03-0.04% and jumped to 0.4-0.6% with th ...

EPFL2024

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Identification and thermal healing of focused ion beam-induced defects in GaN using off-axis electron holography

Jean-François Carlin, Nicolas Grandjean, Raphaël Butté

Thermal healing of focused ion beam-implanted defects in GaN is investigated by off-axis electron holography in TEM. The data reveal that healing starts at temperatures as low as about 250 degrees C. The healing processes result in an irreversible transiti ...

Iop Publishing Ltd2024

Molecular Tailoring of Pyridine Core-Based Hole Selective Layer for Lead Free Double Perovskite Solar Cells Fabrication

Mohammad Khaja Nazeeruddin

To solve the toxicity issues related to lead-based halide perovskitesolar cells, the lead-free double halide perovskite Cs2AgBiBr6 is proposed. However, reduced rate of charge transferin double perovskites affects optoelectronic performance. We designeda s ...

AMER CHEMICAL SOC2023

A 1-GS/s 6-8-b Cryo-CMOS SAR ADC for Quantum Computing

Edoardo Charbon

This article presents a two-times interleaved, loop-unrolled SAR analog-to-digital converter (ADC) operational from 300 down to 4.2 K. The 6-8-bit resolution and the sampling speed up to 1 GS/s are targeted at digitizing the multi-channel frequency-multipl ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Optimal sensor placement for personal inhalation exposure detection in static and dynamic office environments

Dusan Licina, Seoyeon Yun

Modern health and productivity concerns related to air pollutant exposure in buildings have sparked the need for occupant-centric monitoring and ventilation control. The existing personal exposure monitoring is often restricted to stationary air quality se ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Andreas Stephan Lesch, Horst Pick

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

Factors influencing the mean-time-to-failure of single-layer uniaxially prestretched silicone-based DEAs

Herbert Shea, Fabio Beco Albuquerque

We report an experimental investigation on the influence of electric field, electrode surface area, encapsulation layers and elastomer material on the mean-time-to-failure (MTTF) of single-layer uniaxially prestretched silicone-based dielectric elastomer a ...

SPIE-INT SOC OPTICAL ENGINEERING2022

On the Maximum Power Density of Implanted Antennas within Simplified Body Phantoms

Anja Skrivervik, Mingxiang Gao

With the application requirements of wireless technology in implantable bioelectronics, knowledge of the fundamental limits for implanted antennas becomes critical. In this work, we investigated the variation of maximum power density within simplified body ...

IEEE2022

From C/C plus plus Code to High-Performance Dataflow Circuits

Paolo Ienne, Andrea Guerrieri, Lana Josipovic

High-level synthesis (HLS) tools typically generate statically scheduled datapaths. Static scheduling implies that the resulting circuits have a hard time exploiting parallelism in code with potential memory dependences, with control dependences, or where ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Torque Computation With the Isogeometric Mortar Method for the Simulation of Electric Machines

Rafael Vazquez Hernandez, Bernard Kapidani

In this work, isogeometric mortaring is used for the simulation of a six-pole permanent magnet synchronous machine. Isogeometric mortaring is especially well suited for the efficient computation of rotating electric machines, as it allows for an exact geom ...

Institute of Electrical and Electronics Engineers2022

Epileptic Seizure Detection With Patient-Specific Feature and Channel Selection for Low-power Applications

Alexandre Schmid, Keyvan Farhang Razi

An accurate epileptic seizure detector using intracranial electroencephalography (iEEG) recordings, suitable for low-power wearable/implantable applications, is presented. Eleven time-domain features with low hardware complexity are employed in the feature ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Zero-defect manufacturing the approach for higher manufacturing sustainability in the era of industry 4.0: a position paper

Dimitrios Kyritsis, Foivos Psarommatis Giannakopoulos

For manufacturing companies, quality management is a key feature for increasing the competitiveness, productivity, profitability, and sustainability of their systems. Quality improvement (QI) methods aim to achieve high-quality parts without reducing perfo ...

TAYLOR & FRANCIS LTD2022

High Performance Low cost Transition Connectors for 5G mmWave Applications

Anja Skrivervik

Millimeter wave (mmWave) is an interesting research area in recent years. Transition connectors are key components of mmWave passive systems. The commercially available cable connectors are lossy and expensive in mmWave frequencies. In this paper, various ...

IEEE2022