Publications related to 4D printing of Metal-Reinforced double network granular hydrogels

Related publications (34)

Localized Ionic Reinforcement of Double Network Granular Hydrogels

Nature produces soft materials with fascinating combinations of mechanical properties. For example, the mussel byssus embodies a combination of stiffness and toughness, a feature that is unmatched by synthetic hydrogels. Key to enabling these excellent mec ...

Wiley-V C H Verlag Gmbh2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Deep Architectural Form

Frederick Chando Kim

With recent innovations in artificial intelligence (AI), machines can now recognize architectural patterns and generate new forms in ways that far exceed human capacity. The integration of machines in the design process has ushered in a substantial shift i ...

EPFL2024

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

An adaptive phase field approach to 3D internal crack growth in rocks

Tao Xu, Michael Heap, Alexandra Roma Larisa Kushnir

Modeling the 3D internal crack under compression entails complex fracture mechanics (mode I-II-III fracture), resulting in substantial computational costs and challenges in characterizing fracture morphology characterization for Phase Field Method (PFM) si ...

2024

Large-Scale Hollow-Core 3D Printing: Variable Cross-Section and Printing Features for Lightweight Plastic Elements

Marianthi Eririni Kladeftira

Hollow-core 3D printing (HC3DP) proposes a new method for the production of lightweight, material-efficient thermoplastic 3D printed elements. This new fabrication approach promises material savings of 50-80%, while increasing the extrusion rate significan ...

Mary Ann Liebert, Inc2024

Bending and Stretching in a Narrow Ribbon of Nematic Polymer Networks

Harmeet Singh

We study the spontaneous out-of-plane bending of a planar untwisted ribbon composed of nematic polymer networks activated by a change in temperature. Our theory accounts for both stretching and bending energies, which compete to establish equilibrium. We s ...

SPRINGER2023

DRONE GAME THAT HIGHLIGHTS ETHICAL AND SUSTAINABILITY IMPLICATIONS OF DESIGN DECISIONS

Barbara Bruno, Jessica Elke Dehler Zufferey, Siara Ruth Isaac

This paper reports on the development of a brief scenario-based challenge to prompt engineering students’ reflection about the broader impacts of their design decisions, and thereby increase their ethical sensitivity and motivation. The game scenario asks ...

CDIO conference proceedings2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Mechanical Reinforcement of Hydrogels through Physical Crosslinks and Double Network Granular Architecture

Alvaro Lino Boris Charlet

Throughout nature, organisms fabricate a myriad of materials to sustain their lifestyle. Many of the soft materials are composed of water-swollen networks of organic molecules, so-called hydrogels. They generally contribute to the mechanical integrity of t ...

EPFL2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Henri Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Andreas Stephan Lesch, Horst Pick

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

Controlling Light in Scattering Materials for Volumetric Additive Manufacturing

Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Jorge Andres Madrid Wolff, Antoine Vincent Boniface

3D printing has revolutionized the manufacturing of volumetric components and structures in many areas. Several fully volumetric light-based techniques have been recently developed thanks to the advent of photocurable resins, promising to reach unprecedent ...

WILEY2022

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Jürgen Brugger, Arnaud Bertsch, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Max Kollep, Jürgen Brugger, Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Jorge Andres Madrid Wolff, Antoine Vincent Boniface, Georgia Konstantinou, Lorenz Hagelüken

Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ...

2022